Good aftenoom, i'm from brazil i have a classicarmy fal and it uses the same charger as the J.G but it only has the hicaps . I need the midcaps where cani find them to buy . In brazil you can't find it to buy midcaps cauld you tell me where to buy them outside of brazil
I have the same gun, its not a bad gun, I've just installed a perun ab++ in it last night, an easy upgrade to do as you dont need to open the gearbox. I've also taken the ebb off, when changing the spring to a stronger one, the fbs went down but got there in the end with it
I had the store install a perun for me since I don't have the tools. I removed the small spring from the EBB section so I can use the bolt catch, then I replaced the gears, piston, motor and added a sp120 spring bumping the FPS to 419. Still have the EBB turned on because it's fun 😊
Yes they do, I bought this with a midcap bundle so if you want midcaps for it from Taiwangun they are called "160RD LK58 mid-cap magazine [FUXING]" and they are also made by JG Works
Its a pretty nice V3 gearbox but it could been better, after replacing the motor the short screw holding the handle to the motor stripped the threads of the motor holder so i had to get a longer bolt to reach the other half where the threads were fine, then the lip holding a plate had shattered. Other then that the gearbox is very nice and easy to tinker with given it has a QS system (did not expect that) and the hop up is like the CYMA Thompson, its a rotary wheel that helps locking the hopup and barrel to the inner barrel. I did replace the rubber and nub and did have to seal it with some tape making it work better.
Thanks. Usefull tip on taking out the battery compartment to create more battery space in the stock
Yea was the first thing I did, just be careful when you remove the battery from the stock, it likes to tangle up with the wires😊
Good aftenoom, i'm from brazil i have a classicarmy fal and it uses the same charger as the J.G but it only has the hicaps . I need the midcaps where cani find them to buy .
In brazil you can't find it to buy midcaps cauld you tell me where to buy them outside of brazil
Good question, i dont know :( i tried to find midcaps but all taiwangun had was high cap and i could not find any midcaps myself!
I have the same gun, its not a bad gun, I've just installed a perun ab++ in it last night, an easy upgrade to do as you dont need to open the gearbox. I've also taken the ebb off, when changing the spring to a stronger one, the fbs went down but got there in the end with it
I had the store install a perun for me since I don't have the tools. I removed the small spring from the EBB section so I can use the bolt catch, then I replaced the gears, piston, motor and added a sp120 spring bumping the FPS to 419. Still have the EBB turned on because it's fun 😊
Do they do mid cap mags?
Yes they do, I bought this with a midcap bundle so if you want midcaps for it from Taiwangun they are called "160RD LK58 mid-cap magazine [FUXING]" and they are also made by JG Works
Do you know what battery it uses?
It came with a 7.4v NiHm but after my upgrades i use a 7,4-11,1v LiPo
from tiktok to yt how das it looks from inside? Mechabox, hopup.......
Its a pretty nice V3 gearbox but it could been better, after replacing the motor the short screw holding the handle to the motor stripped the threads of the motor holder so i had to get a longer bolt to reach the other half where the threads were fine, then the lip holding a plate had shattered.
Other then that the gearbox is very nice and easy to tinker with given it has a QS system (did not expect that) and the hop up is like the CYMA Thompson, its a rotary wheel that helps locking the hopup and barrel to the inner barrel. I did replace the rubber and nub and did have to seal it with some tape making it work better.