Amazing work! I can't imagine how many hours this took! Seth Echternacht has a point though, those universal joints won't last long at those angles with any kind of power going through them. Can you shift the whole engine/gearbox assembly rearwards to straighten them out? Or flip the engine?
It drew my eye too. Unless there's a suspension travel limitation, it would seem like one shaft could be shortened to reduce the angle. But I'm not designing it, so don't know the constraints.
You'd probly get away with 2 half shafts here. A slip yoke in the middle, with a cv joint either end. You would have to run them going in a straight line from the gearbox to the hub, in front of the strut not behind it. Also the tyre's directional tread pattern is facing backwards. It's running the wrong way you need to flip the tyre on the rim. Otherwise it looks great i can see a lot of thought and good hard work went in to this. Congratulations well done
An Active designer pro WHY? I left you this comment 3 years ago... you didn’t even bother to reply to me then or even click thumbs up on my comment. So why would I bother to subscribe to your channel now
@@maddblair sir there is a miss understanding.im not the guy who you commented for him 3 years ago i just started my chennel on week ago. Im sb else not that guy
The power train assembly acute angles on the Driveline s*** ain't going to work, well maybe a few miles. As an off-road machine with long travel suspension the front end so frail after a couple jumps that s*** would be fuckered up. Concept idea is really cool but get back to the drawing board
Muy chido y todo pero le falta una música de fondo 👍
Amazing work! I can't imagine how many hours this took!
Seth Echternacht has a point though, those universal joints won't last long at those angles with any kind of power going through them. Can you shift the whole engine/gearbox assembly rearwards to straighten them out? Or flip the engine?
Hi
Join my channel
could you put up a download link for the finished buggy ?
the extreme angle on the axle shafts will almost certainly fail in short order
but I'm not trying to be negative incredible creation...just a mechanics 2 cents!
It drew my eye too. Unless there's a suspension travel limitation, it would seem like one shaft could be shortened to reduce the angle. But I'm not designing it, so don't know the constraints.
esta bacannn amigo felicidadesss quisiera un ejemplo de como de ase la estructura (tubos)
Knice design concepts . Love to see one in the real flesh .
Those A arms look a little to weak, you may want to stiffen that up.
Beautiful work.
You'd probly get away with 2 half shafts here. A slip yoke in the middle, with a cv joint either end. You would have to run them going in a straight line from the gearbox to the hub, in front of the strut not behind it.
Also the tyre's directional tread pattern is facing backwards. It's running the wrong way you need to flip the tyre on the rim.
Otherwise it looks great i can see a lot of thought and good hard work went in to this. Congratulations well done
Hey join me😊
An Active designer pro hello mate. Where would u like me to join?
@@maddblair join my chennel please
An Active designer pro WHY? I left you this comment 3 years ago... you didn’t even bother to reply to me then or even click thumbs up on my comment. So why would I bother to subscribe to your channel now
@@maddblair sir there is a miss understanding.im not the guy who you commented for him 3 years ago i just started my chennel on week ago.
Im sb else not that guy
can you email me the full engine? could really use this :)
how many hours did it take to complete this please
Hi im trying to design a buggy in solidworks
could you tell me how to do the simmetry?
its by a plane or centerline?
hello can have the solidworks plan ?
Thanks
Can you uplouad the project on internet and give us the link to download?
The power train assembly acute angles on the Driveline s*** ain't going to work, well maybe a few miles. As an off-road machine with long travel suspension the front end so frail after a couple jumps that s*** would be fuckered up. Concept idea is really cool but get back to the drawing board
could help me with the plane of the vehicle please
tuyệt thật
I need the design
Sera que me puede pasar el planooo del buggi que me encato lo quiero hacer
Hi
Join my channel
vc passaria este projeto e as medidas
Bad driveline design it will fail, chassis is good for drifting and no contact road racing and time trials though
Hi
Join me channel
Si el volante ests en el medio y hay 2 asientos enfrente del volante.. quien conduce el de la derecha o izquierds...?
Igual. Exelente video. Me gusto mucho
Hi
Join my channel🤗
04:52
06:10
04:03