Coin-Crushing Power: Knipex 400mm Plier Wrench. Now this is a Wrench! 3.5" Jaws. 16" long. 51oz!
HTML-код
- Опубликовано: 30 сен 2024
- amzn.to/3HbJWXq The Knipex 400mm Plier Wrench 8603400 has coin-crushing power Now this is a Wrench! 3.5" Jaws. 16" long. 51oz! What can't this do?
On Amazon: amzn.to/3HbJWXq
The big pliers wrench makes for a great small bearing/bushing field press!
I've used a pair of them and some thicker flat bar steel chunks to do some bigger stuff and to get to spots I couldn't reach with a single pair. Such a versatile tool.
Love em for fuel lines on Peterbiltd
uh oh. you're in trouble: "If you are convicted of damaging U.S. bills or coins, you may face fines, jail time, or both. For bills, the maximum fine is $100 and the maximum jail sentence is six months. For coins, the prison sentence can be up to five years." - 18 U.S. Code section 331
"To be convicted, you must intend to deceive someone." so maybe don't say your goodbyes to the family just yet.
imagine some hardened steel blades that slip over the jaws, and presto, bolt cutters.
Have a feeling that Knipex is gonna come out with 500 version just to troll this man.
I'd prefer a "350" version combining the head of the 300 and the handles of the 400 version. The head of the 400 is just too massive for narrow spaces.
I have a set of these and a big air source heat pump. They have been coming in very handy on a few of the massive glands and fittings it has. The heating company that installed it wanted to charge me a fortune just to come round and give one of them that leaked a twist (also because they said they needed to drain and depressurise the whole system). Bought this instead and saved myself loads of money and now a tool that payed for itself 3 times already... as it has since leaked again in a different spot.
:/ I mean, yes, but it is best practice to flush with nitrogen, and pull a vacuum. You don't want humidity in the system.
@thelred-ph3lq it was leaking glycol not air... maybe I should have specified that. So your comment does not apply I'm afraid.
@@varpos That's what I get, for trying to be a smart ass. 😂
Their install leaked and they wanted you to pay for it? What a joke of a company.
I have the biggest one as well fabulous and did you know they have another one and its a 15 degree offset but can’t get my hand on one yet
Great tool to store on the tractor,,,lots of uses,,,,thanks doc….
No fkin way I was not expecting him to crush it that way
I can do it with the 125😁
Imagine someone messing with you, and you grab their finger
So much for hard currency…
300mm works with euros easily
Welp, I will show my wife the quarter trick after I purchase these and justify the purchase that way lol “but babe look what they can do!”
I'll be doing this tomorrow morning when my 150 and 300 arrive. Already have the cobra and pliars wrench xs 😎
I love Knipex. Their slogan should be: "Knipex means 'tool' in any language"
I really don't need them but i need them
I find the 300 mm are great for gripping onto, bending and manipulating sheet metals.
This and the smallest one are the only two that I havent bought yet...I ve got all the cobra's
Defacing the currency is a crime (or is where I live). Didn't stop me as a kid tho'.
Only illegal if you try to use the defaced coins as money. In America you can burn and smash all the coin you want.
Lately I’ve been using my pliers wrench as a finish nail puller. The huge grip force and the curved back make it a terrific tool for that.
....Oh that's a great idea
DOC SMASH!! Love it!🤣
Well if I ever want to crush a lot of coins I know the right tool for the job but until that day I will pass.
Having a difficult time finding Knipex tools in store here in Salt Lake City, Utah.
One electrical store on the west side has a few but thats about it...
Nice! Looks like just what I need. I just damaged the tip of my 250 pliers wrench trying to bend some evidently tough wire.
This makes sense in Serbian... Bilakos grabs the wire with 400 and menacingly mumbles "You want to be expensive to me" (Ti ćeš meni da budeš skupa)
I have the 5, 6, 7, 12 and 16 inch ones and they are my most used hand tools. One is always on me and a few on my work desk.
Recently I'm also using their Twin Grip a lot.
That's the only size I don't have. Looks like I will have to correct that! Remembering months ago all the people trying to tell me that they preferred the old style Cresent wrench. I told them then and still believe that they are just silly.
It's strange they didn't print the jaw numbers on the side of the 400 like they do on the rest.
indeed... I would like to have seen that for the price I paid for it 🤔
The addition of the numbers was part of a redesign of some of the sizes a few years ago. They changed the forgings to remove a bit of weight too. I suspect they only invested in new tooling for the most popular sizes and the 400mm is still the original design.
Was the electric wrench a joke or actually a good tool? Review that!
I think it looks sweet
In what world do you live in that this fits and works on every bolt you need to turn lmao.
That little battery powered gimmick would go in my box of loaner tools!
😂😂 too true
Also possible with the 180's...
The pliers wrenches don’t like being used as a hammer… but they are great. I love the cobras, just got the twin grips and haven’t had the chance to use them much yet
The 400mm wrench is great for debt collecting. 😂😂
I think the quarters are still copper nickel. They just passed a bill to allow the mint to change the metals so its likely the coins will change soon.
SMASH OR PASS
**secret service has entered the chat**
I don’t need them, but now I want them….
That's a lovable beast! Imagine what a 560mm version could do. It would be like a handheld hydraulic press.
Nice!
Wow that looks nice! Thanks for the review!
👏👏👏👍👍
Knipex could have called it "The Coin Crasher". Missed opportunity...
I own the 5, 7, two 10's, and two 16's. I use them every day at work, I especialy like the 16-inch pairs in conjuction with a cheater pipe for removing large hydraulic hoses.
The PowerTorque GM8656 is an adjustable wrench that has a spring that allows you to rotate it on a bolt without removing it. I don't really recommend it, but it does exist.
I'd listen to a podcast of you crushing stuff, and saying "Smash, Smash 🙂" 4:08
Discovered these pliers wrenches when Knipex first came out with them. They get almost daily usage. They have so many more uses than simply replacing a wrench (I have wrenches for that job).
Man I’ve been waiting for this video thank you for the excellent video as always I have my 400 on the way
Have the 560 Cobra's and the 10" plier wrenches? Love them? Have a 24" Craftsman USA adjustable wrench for large stuff, but the flat jaws of the Knipex are great for not damaging fasteners? Good job, sir.
Maybe Google how a question mark is used?
Freaking awesome 😎
Do you think it’s can replace pipe wrench?
Knipex Cobra can replace a pipe wrench. This model here can not. Check the Knipex Cobra.
This mad man is defacing US currency on camera.
😂
I use these daily for large hydraulic hoses, up to -24 size. Its an awesome tool to have around.
Not quite 1 hand "smashing" 😊
Hulk smash
There is an adjustable wrench that can do that same thing, slipping around on the back stroke. A wera joker adjustable, which operated on basically the same principle. I'm surprised you don't have one to be honest, with all the other odd stuff you seem to have haha
Do you mean this one? ruclips.net/video/HUqV9x6oARs/видео.html