Very excited to get this drone. I started on an Avata 2 and flew it for about 4 months while researching FPV and learning BetaFlight with an Air 75 To other people coming from DJI drones, you need to research and understand FPV before buying something like this. Do not get sucked in by the $100 price tag, until you know what you're signing up for. These do not come ready to fly, you need to know how to set it up, and already own the required equipment. It does not come with a camera, video system, batteries or a charger. You have to buy all of that separately.
yeah, sure, whats wrong with yours rates? here in the video I used totally stock pids and rates - for the purity of the experiment. But for my own setups, for tiny whoops, for cinematics, for freestyle drones, they are completely different. Write me on the Instagram I'll share a screenshot of my KISS 5" rates
Love the videos, but maybe try captions at the bottom of the page....? As your videos are not only about Cinematic shoots but you do give some important info that may be hard for some of us to understand.....😊
Another great and informative video as always. Thank you. Loving this new drone. I had a question. I was looking to get a new tool for work indoors. When flying in a low camera angle on this drone, are the guards in view? If so, would you recommend something more like a Pavo 2.5? Thanks in advance 🙏🏽
Thank you for your comment. You don't miss my videos and I appreciate it, thanks again)) Yes, propguards can be visible. Moreover, a O3unit indoors might not be the best idea, but you're on the right way, something like pavo2.5 with a naked gopro. I use a Cinebot30 with gopro11naked for indoor flights, but I would recommend you stick with 2.5 inches. 3" too big can be too heavy
Thanks for the video, I'm sold and want to buy one! Question : can I use the dji goggles 3 and dji fpv remote 3 with the exact drone setup you recommended? Thanks!
You can use the controller 3 but it needs to be used with the goggles 3. This is really not recommended though. If you lose your DJI video signal, your controller signal drops with it. If you use elrs or crossfire, and your DJI video gets spotty you still have time to fly backwards or up high to get it back. Saving yourself a potential hard crash. You would need basic BetaFlight and FPV knowledge to hook the drone up and change the serial RX so that the controls go through the DJI 03 air unit, instead of the receiver they install at the factory.
Is that why the integra dji goggles are so cheap? It doesn't seem like you can fly anything but the Avata 2 with them? Is DJI starting to open up the forwards/backwards capability with some of their HD Gear? It seems like quite a scam
I was looking at this drone. You have to add the camera tho, right? I'm looking for a first fpv drone and this one seems... More in depth than I'm ready for
My first drone was 5", the second was also 5", the third simulator :) . And now I think that the best solution (for me) would be 1s tiny whoop in that days And yes, u need to install VTX module
You not be able even install a naked gopro on it. Only if you are satisfied with the video from O3UNIT indoor… I have a video on the channel that I use for real estate, but it's not for everyone
Nice video. Will the cheapest goggles work on this? And the cheapest controller? Which ones do you recommend? I'm looking for the most affordable possibility. Does it come with a camera? And if not, which camera do you attach to it? Thank you!.
So, Its compatible with goggle 2 if u will install djiO3 unit. On the official store u can get kit version, without o3unit, obviously u can bind it with dji radio, but probably it would be better to use it with elrs radio, like radiomaster pocket or smth
@WIL_FPV thankyou i realised that was a bit of a loaded question. I've been doing more research on YT fpv 101 to learn the basics i appreciate your help
Very excited to get this drone. I started on an Avata 2 and flew it for about 4 months while researching FPV and learning BetaFlight with an Air 75
To other people coming from DJI drones, you need to research and understand FPV before buying something like this. Do not get sucked in by the $100 price tag, until you know what you're signing up for.
These do not come ready to fly, you need to know how to set it up, and already own the required equipment. It does not come with a camera, video system, batteries or a charger. You have to buy all of that separately.
How do you like your air75?
I got mine and I have to say that I probably like it better than 65mm... but no, for indoor flights it's still the 65
any video or link so i can prepare fr this.
Smooooth!
Awesome video man!!!!!
thank You and i really appreciate it, ur comments, ur opinion
btw, thanks for elrs step by step video
I prefer the mobula8(but those LEDs are 🔥😁)...loving the o3 options on these tinywhoops tho!!!
moreover, there are also options for LED colors
thank You for ur comment
Yeah this thing hauls ass thx for letting me try it VLAD :D
Thank you for joining me ;)
Can you tell something about the rates you are using? I’m still struggling with mine for my Pavo 20 pro and would like to try different rates
yeah, sure, whats wrong with yours rates?
here in the video I used totally stock pids and rates - for the purity of the experiment. But for my own setups, for tiny whoops, for cinematics, for freestyle drones, they are completely different. Write me on the Instagram I'll share a screenshot of my KISS 5" rates
Love the videos, but maybe try captions at the bottom of the page....? As your videos are not only about Cinematic shoots but you do give some important info that may be hard for some of us to understand.....😊
Thank you very much for your comment and your advice. I'll take it into account, maybe it will be more useful and help to understand fpv
Another great and informative video as always. Thank you. Loving this new drone. I had a question. I was looking to get a new tool for work indoors. When flying in a low camera angle on this drone, are the guards in view? If so, would you recommend something more like a Pavo 2.5? Thanks in advance 🙏🏽
Thank you for your comment. You don't miss my videos and I appreciate it, thanks again))
Yes, propguards can be visible. Moreover, a O3unit indoors might not be the best idea, but you're on the right way, something like pavo2.5 with a naked gopro. I use a Cinebot30 with gopro11naked for indoor flights, but I would recommend you stick with 2.5 inches. 3" too big can be too heavy
@WIL_FPV Ok, I'll definitely take your recommendation and add a naked GoPro as well thx again.
@@DannyFPV7 thank you
Thanks for the video, I'm sold and want to buy one! Question : can I use the dji goggles 3 and dji fpv remote 3 with the exact drone setup you recommended?
Thanks!
Thanks for the comment. You can use O3Unit with DJI FPV Remote Controller 2, DJI FPV Goggles V2 or DJI Goggles 2 if im not mistaken
You can use the controller 3 but it needs to be used with the goggles 3. This is really not recommended though. If you lose your DJI video signal, your controller signal drops with it.
If you use elrs or crossfire, and your DJI video gets spotty you still have time to fly backwards or up high to get it back. Saving yourself a potential hard crash.
You would need basic BetaFlight and FPV knowledge to hook the drone up and change the serial RX so that the controls go through the DJI 03 air unit, instead of the receiver they install at the factory.
Is that why the integra dji goggles are so cheap? It doesn't seem like you can fly anything but the Avata 2 with them? Is DJI starting to open up the forwards/backwards capability with some of their HD Gear? It seems like quite a scam
I was looking at this drone. You have to add the camera tho, right? I'm looking for a first fpv drone and this one seems... More in depth than I'm ready for
My first drone was 5", the second was also 5", the third simulator :) . And now I think that the best solution (for me) would be 1s tiny whoop in that days
And yes, u need to install VTX module
Nice production quality. Unfortunately audio was a bit difficult to hear some times.
thank u and sorry for that
Would you recommend this for real estate indoor/ outdoor?
You not be able even install a naked gopro on it. Only if you are satisfied with the video from O3UNIT indoor…
I have a video on the channel that I use for real estate, but it's not for everyone
zajebisty
Nice video. Will the cheapest goggles work on this? And the cheapest controller? Which ones do you recommend? I'm looking for the most affordable possibility.
Does it come with a camera? And if not, which camera do you attach to it? Thank you!.
So, Its compatible with goggle 2 if u will install djiO3 unit. On the official store u can get kit version, without o3unit, obviously u can bind it with dji radio, but probably it would be better to use it with elrs radio, like radiomaster pocket or smth
@@WIL_FPV Thanks for the update
What goggles and remote would you get for this i know nothing about drones but dont know what connects to what
So, in my case it is DJI goggles 2 and TBS Tango 2. But it is not necessary, it could be any other radio with elrs system or whatever you want
@WIL_FPV how do you tell what drone connect to the remote?
Also do the goggles connect via Bluetooth or something?
@@mmack3174 The 5.8 GHz frequency band for goggles
With radio we have some options like 868, 914, 2.4
honestly it is a dipper question
@WIL_FPV thankyou i realised that was a bit of a loaded question. I've been doing more research on YT fpv 101 to learn the basics i appreciate your help
can u build walksinail also in this?
Support VTX: DJI O3 Air Unit, Caddx Vista Kit, RunCam Link :/
Stella
Hey Im from india
Unfortunately its not available in india
Try to order from the official website BETAFPV, I think they send whatever u want