The arch at 00:05 is Corona Arch, just outside Moab, Utah. We were there in January of 2024, and it's an epic place! It's one of the most incredible arches in the Southwest, and you can fly on a drone there since it's on BLM land. And the place at 02:12 is Goblin Valley state park, a couple of hours drive from Moab, and the rocks make the place look like something from Star Trek!
@@mysticx07 I saw someone do that a couple years ago but like, it was moving! He pulled his goggles, killed the props and caught it and it blew my mind haha. I had to try it. Only tried it once and I was fully running through a field like a wide receiver to catch it 😂 but it was successful
@@mysticx07 corta el vuelo del dron parada de emergencia las 2 palancas hacia adentro y cae el dron con la inercia cae de la forma diagonal al momento de regreso hacia ti .... Eso con la práctica lo perfeccionas
01:27 This air unit doesn't install EXACTLY like the previous O3. The camera itself uses different mount spacing for the screws and is wider then the O3, so be aware you'll need to print or get new camera mounts if you're swapping it into a frame designed for the O3.
This cinematic shots is cool and all. And the air unit was an instant buy, all my quad run O3 already, so they will slowly get upgraded to pro's. But I can't wait to finally build my own DJI tinywhoop with my new air unit.
I filmed a helicopter at that arch at the beginning of your video for a promo video with a DJI Drone a few years ago. Beautiful area and looking forward to checking out this product.
I’m very new to Dji! Is this a drone or just a camera attached to a drone? Or do I need to buy separately and if I do then what do I need to purchase along side the air unit 04? Wanto buy!?
They're very close, very similar lenses and likely same sensor. Osmo has more resolution options and you don't need to worry about your live view being higher latency when you want better video captured. On the other hand, O4AU gives you wysiwyg so you always know exactly what you've recorded, that's always been one of my favourite things about using Air Units (and Avatas) to record stuff.
Is this a drone ? or just the components to assemble a drone? What do we need if we have 0 to fully assemble a working drone with this / control it as well / Stream the video directly to a obs studio setup.
Can the Light version of this be dropped into a conventional RC plane - I own N3 goggles and a NEO but would enjoy being able to use this kind of kit on an aircraft rather than a drone.
No, it's a camera with digital transmission system that transmits video to DJI Goggles 2/Integra/3/N3 at a low latency, used for FPV drones/planes/rc cars etc.
Very timely!!! I'm building my 5 Inch FPV and I already had DJI Goggles 3, while this video was public just 1 hour before my searching. This is exactly what I'm looking for!!!
DJI knocked it out the park with this release!
As always!
The arch at 00:05 is Corona Arch, just outside Moab, Utah. We were there in January of 2024, and it's an epic place! It's one of the most incredible arches in the Southwest, and you can fly on a drone there since it's on BLM land. And the place at 02:12 is Goblin Valley state park, a couple of hours drive from Moab, and the rocks make the place look like something from Star Trek!
I’m sorry but can we talk about how he catches his drone at 1:38 😅
Right!?
@@mysticx07 I saw someone do that a couple years ago but like, it was moving! He pulled his goggles, killed the props and caught it and it blew my mind haha. I had to try it. Only tried it once and I was fully running through a field like a wide receiver to catch it 😂 but it was successful
I'd lose all my fingers trying this
bro has iron hands
@@mysticx07 corta el vuelo del dron parada de emergencia las 2 palancas hacia adentro y cae el dron con la inercia cae de la forma diagonal al momento de regreso hacia ti .... Eso con la práctica lo perfeccionas
So stoked on this! Can't wait to see what everyone creates on these 🤘🏽
01:27 This air unit doesn't install EXACTLY like the previous O3. The camera itself uses different mount spacing for the screws and is wider then the O3, so be aware you'll need to print or get new camera mounts if you're swapping it into a frame designed for the O3.
Eh, my 1st unit so don't care.
This cinematic shots is cool and all. And the air unit was an instant buy, all my quad run O3 already, so they will slowly get upgraded to pro's. But I can't wait to finally build my own DJI tinywhoop with my new air unit.
DJI n3 goggles work with the o4 air unit !!!🔥
Why wouldnt they arent they brand new?
You've got some great footage here 👏
Love you DJI It‘s finally here ❤❤
DJI is killing it!
theres nobody like DJI I'm sorry they are the best drone company hands down
Always the best, one day I would be flying in the air with one of my own, DJI product
This would look sick for our minibikes 😮
Awesome and incredible! Yoo-hoo 🥳
Did they improve the thermals or does this one also get super hot?
Dude is a dji official now, good work! Good content and attitude goes a long way.
That's cool! Will definitely use it in one of my next travel videos
Crazy, I need to try this 🎉❤
“Silky smooth,” like a haircut from the Zohan. 😂
Congratulations DJI love your products
This looks so amazing. We'll take 100! 😎
Crushing it as always 🧡
Danny McGee with the main feature!! Thatta way man!!
Very cool 🔥
It's finally here!
Lets goo!!! I am buying this!!
Finally after several month waiting for it
Awesome stuff. I need a drone soon
Holy Molly, I knew something like this O4 was coming out soon! I may have to return my DJI Osmo Action 5 I just got to attach... :D
Saw it, bought it!
That was wow❤❤
letsgoooooo
I’ve been waiting the whole summer for this release
I filmed a helicopter at that arch at the beginning of your video for a promo video with a DJI Drone a few years ago. Beautiful area and looking forward to checking out this product.
YES, compatible with Goggles 2, yes sirrrr 👏🏼
amazing technology
KILLER !!! 🎉
Still striving witj my mini se
minis are awesome
Estoy muy ansioso por el Mavic 4 pro, por favor lancenlo ya!!!
Been waiting for this! This ones a game changer for sure! Thanks DJI!
I'm so excited that I can finally build a tiny whoop with the dji system 🔥🔥🔥
@@silvanulshofer6144 you and me both! Now I’m trying to figure out what whoop I want to put it on! It’s getting a new build..
What was stopping you before? Been racing DJI tiny whoops for 5 years now 😅 But yeah, this is gonna make them even better!
Curious what present drones it fits without having to rig them? 😅
I’m very new to Dji! Is this a drone or just a camera attached to a drone? Or do I need to buy separately and if I do then what do I need to purchase along side the air unit 04? Wanto buy!?
This is exciting but huge flaw is that the camera doesn’t drop in to frames where the O3 could mount. It has different bolt spacing and camera width.
Simply 3d print out your new mount
Camera width is the same, you can simply just use 1 set of bolts to mount it until you get a better mount.
When he caught the drone i knew he was the real deal.
Flying into tanks and bunkers have never been easier!
Would be te Osmo Action 5 still better in terms of Quality?
They're very close, very similar lenses and likely same sensor. Osmo has more resolution options and you don't need to worry about your live view being higher latency when you want better video captured. On the other hand, O4AU gives you wysiwyg so you always know exactly what you've recorded, that's always been one of my favourite things about using Air Units (and Avatas) to record stuff.
I need these!!!
DANNY MCGEE HAH NICE ONE M8
Can you give a quick first drone setup? Not the base dji drones, but a plug and play build one? I want to skip the first step. 😊 Thanks
Wait, is it available now or are we talking April or March?
These have been up for sale on eBay by the boxload for weeks
Just wanted to ask is this what's inside the avata 2?
Thanks ❤❤❤❤❤❤❤❤❤❤
DJI this drone is cool, awesome, magnificent drone I ever seen😮!
Hello, with O4 air unit pro.
can we keep auto settings for live feed and Manual exposure for onboard recoding??
Cool. Lets get a v2 firmware update in the works! Thanks!
Is this a drone ? or just the components to assemble a drone?
What do we need if we have 0 to fully assemble a working drone with this / control it as well / Stream the video directly to a obs studio setup.
Can the Light version of this be dropped into a conventional RC plane - I own N3 goggles and a NEO but would enjoy being able to use this kind of kit on an aircraft rather than a drone.
I love it. But would really love D log instead of D log M
What is it, Just a camera to attach to a drone?
Yes.
No, it's a camera with digital transmission system that transmits video to DJI Goggles 2/Integra/3/N3 at a low latency, used for FPV drones/planes/rc cars etc.
DroneNation!
Hey pilots - I have an DJI Avata 2 that I like but I want to upgrade to something that is faster. What do you recommend?
I suggest you wait for dji fpv 2 or avata 3.. :)
Oh nice! We heard some rumors about it. The O3 has been pretty awesome. Can't wait to try this one!
I like that the camera can be easily replaced.
what're you living under a rock?
Whats a 04, been flying a phantom 3 for 8 years.
@@mlentschProbably! 😅 Didn't really dive into the leaks too much.
@@DBCooper-r3lO4 is just the latest transmission system.
ITS HERE!!!!!!
Vem pro Brasil?
Question how to build drone like this, Thank You DJI for another Product!
DJI is cooking!
When will Dji release Avata Pro?
Amazing
Here we go!!!
Everything’s okay, but it’s sad how poorly DJI treats its warranty service obligations to customers.👍🌰
Yoo-hoo 🥳
Finallllyyy. Time to buy the o3
HELL YEAH!!!!!!!!!
DJI Goggles N3 and DJI FPV Remote Controller 3
Will work with this is that correct?
That's good yes... but when could we have the possibility to share between google 3 to the previous version ? Integra/gg2...
can we swap 03 from old avata to this 04?
brooo, DJI your cooking up some strait good will sh*t, amazing job once again 👍👍👍
DJI should build signal relayers so we can attach them to baloons to get even better range.
What good is all that distance when you can't fly outside your line of sight?
DJI👍🏻👍🏻👍🏻
Hi, which drone is it that is flying in the video?
Waiting on my avata 2 replacement was doing regular fpv activity and the goggle feed froze and boom crashed hard
will this work on the dji googles v2? lol
Work with Goggels N3??????????
Yes.
Whats with INAV OSD ?????
So this is not for DJI official FPV drones?
whooping this thing will be crazy
Is this compatible with g2 ?
Watch the video
Cant wait
Finally!!
wow; dji really cooked on this one
How many Goggles (receiver) can you connect to this unit?
You link 1 pilot goggles, then those can broadcast out to any other nearby goggles.
Business policy with new think and thought also graving market ❤❤❤ its amazing 🎉🎉🎉
Does it have 10bit?
Obvio it shoots in D-Log M
Rip action 2 💔
Very timely!!!
I'm building my 5 Inch FPV and I already had DJI Goggles 3, while this video was public just 1 hour before my searching. This is exactly what I'm looking for!!!
you sound like you're not intellectually equipped to play with this thing
I wonder can it be used on a parrot disco plane..
Are they only compatible with DJI goggles?
oh cool, not a drone. but can make one with it. Smart.