How to Replace Power Steering Pressure Hose 1996-2002 Toyota 4Runner

Buy Now!
New Power Steering Pressure Line Hose Assembly from 1AAuto.com 1aau.to/ib/1ASP...
This video shows you how to install a power steering pressure hose on your 1996-2002 Toyota 4Runner.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• 17mm Flare Wrench
• 24mm Wrench
• 12mm Socket 1aau.to/obqc/1A...
• 17mm Socket 1aau.to/obqc/1A...
• 19mm Socket 1aau.to/oaeD/1A...
• 21mm Socket 1aau.to/oaeD/1A...
• 22mm Socket 1aau.to/onY/1AX...
• 1/2 Inch Ratchet 1aau.to/oaeD/1A...
• 1/4 Inch Ratchet 1aau.to/oa6G/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obqc/1A...
• Torque Wrench 1aau.to/oaBp/1A...
• Gloves 1aau.to/oYL/1AX...
• Safety Glasses 1aau.to/oRV/1AX...
• Drain Pan 1aau.to/oyx/1AX...
• Funnel 1aau.to/ohI/1AX...
• Reciprocating Saw
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@tonygrace2322]

Thank you very much for this comprehensive video! I didn't have to replace the pressure hose...rather the power steering pump. In removing the banjo bolt, I was experiencing exactly what you were experiencing and I wasn't sure on how to take it off. Again, thank you so much for sharing your knowledge in this video!

[@brennantarr2771]

I found for the power steering pressure hose top bolt that he gets off at 10:30 it’s easiest to just remove the air filter box. So if anyone is going to do this I promise it’s worth the time to just take that out to get a better angle.

[@xx_sm1l3ym3rk_xx7]

Can you do one for chevy impala LS 08

[@billyt9058]

I really dont understand why you need to completely take off the outer tie rod. Couldnt you just take it out of the LBJ assy and not mess with your alignment?

[@rmcnabb]

My god, the rust on that frame.