I realize I need one now I've seen it in action so much safer than table saw for straight cutting warped boards much faster than using the jointer as well. Beautiful work.
Yay and......boo! What else am I going to want to watch now..?? Congratulations on a fantastic result and hats off to your ingenuity and perseverance. Great job but a little sad as it’s all finished....!!! Can’t wait for your next inspirational build.
Your work is amazing. Attention to detail is spot on. The only problem I have with your channel is not enough video content. That's ok, I'll watch what you do when you do it. Thanks for sharing your talents.
This is a brilliant idea with excellent execution! I would be interested in purchasing plans to build this. I would like to see who else is interested in plans for this saw to see if we can convince Mirock to pursue selling plans.
Brilliant. When you see how well it operates and adds accuracy, makes me look at my table saw in disgust. Can't wait till this becomes the new standard. ! Keep the great ideas coming.
Interesting design, I assumed it made more sense to keep the blade on the sliding table for simplicity sake. Seems kinda scary, u think some sort of guard attached to the fence would make it a little safer?
Dear Mirock, Surely you meant by 900 mm & not 90mm. As for your table saw as it currently stands; it's a highly original design that truly merits the title of built by "Master Inventor". It's most unusual to reverse the order in which traditional table saws work but clearly you saw something that most of us miss & you've succeeded in exploiting to it's full effect. I feel kind of relieved that you've not been hired by the department of defense, I can only imagine the jaws of seenior officals dropping as you unveil your latest creation. It would more than just turn heads that's for sure. Very well done. Kind regards. P.S: Now do you think you could make something for Honourable wife that would get her talking to all the neighbours for weeks on end???
@@mirockswoodshop Dear Mirock, Thank you very much for your courteous & hearted reply. Rest assured someone like you is under very close scrutiny indeed. Many thanks & kind regards.
Love your uploads and really liked the idea of a portable precision saw, however haven't you just made an upside down, non portable track saw? Strikes me that straightening that edge, and cross cutting the end, would have been easier and probably quicker with the track on top of the board, as the track saw was designed... This looks great for very accurate small parts, but for big parts/boards it just seems a bit pointless? With a long track you can straighten an edge over twice as long as that board. Love the engineering none the less.
Agreed, my first thought when I saw it was I've got to have one and then I realised I already do exactly that operation with a regular track on top of the board. I think this would probably be slightly faster for setting up a parallel cut (once the right hand fence is in) but you'd be talking seconds faster and this design limits the saws cut length. Like all Mirock's projects the engineering is great but I can't help feeling this problem is solved.
Yes Joel, but here is functional of upsided down track saw but not only. It is not main goal but just additional profit from decision of attaching to the worktable. More advantages will be obvious when big protractor fence will be mounted.
I enjoy your videos thanks. I ask you to consider: a homemade table saw is dangerous and unpredictable. It you get it wrong just once you could be seriously injured.
@Mark Hill I ask you to consider: a factory made table saw is dangerous and unpredictable. It you get it wrong just once you could be seriously injured. I enjoyed the video too.
I realize I need one now I've seen it in action so much safer than table saw for straight cutting warped boards much faster than using the jointer as well. Beautiful work.
Amazing table saw. And the heavy metal montage? Absurdly hilarious. I think you were laughing hysterically while making that part of the video.
All that brilliant engineering and the best part is the putty knife spring mechanism
Yay and......boo!
What else am I going to want to watch now..??
Congratulations on a fantastic result and hats off to your ingenuity and perseverance.
Great job but a little sad as it’s all finished....!!!
Can’t wait for your next inspirational build.
Amazing work, can’t wait to see it all finished.
Table saw montage with guitars in the back.... Nice. I must be dreaming
Congratulations. Nice & professional project 👍👍👍👍👍
Brilliant engineering 👌👌
Your work is amazing. Attention to detail is spot on. The only problem I have with your channel is not enough video content. That's ok, I'll watch what you do when you do it. Thanks for sharing your talents.
Yeah, I also would like to shot videos but need to earn a bit dinero for family needs
@@mirockswoodshop I clearly understand. What I said was meant as a compliment to your talents.
I am blown away by this. What a great idea.
Well done, it looks good and seems to function well. I think you win the prize for showing the same cuts the most times on a video!
This is a brilliant idea with excellent execution! I would be interested in purchasing plans to build this. I would like to see who else is interested in plans for this saw to see if we can convince Mirock to pursue selling plans.
Unfortunately I so oftenly change pathes that no reason to do planes till creation is going.
Rick Ammon j
You are master of diy sir.
Congrats and more video
Wonderful ideas will cheer for your wonderful work
Brilliant. When you see how well it operates and adds accuracy, makes me look at my table saw in disgust. Can't wait till this becomes the new standard. !
Keep the great ideas coming.
I also hope table saw producers will turned a bit more attention to accuracy from sausage noncutting devices.
Tim P Saws with the same working principle are commercially available for quite some time. The Bosch PPS 7 S for example to name the cheapest one.
Fabulous engineering
Love the design. Great job Mirock.
I didn't know it would be pushing/pulling the saw carriage through the cut; awesome! Great design.
Holy damn jumpin baby wafer. This is amazing, I wish I could somehow borrow your brain for a while!!!
a brilliant idea. you are a genius
I liked the saw’s unusual design design!
Oh men, this is awesome!
Все, як завжди, на найвищому рівні!!!
Circular insanity is my favorite insanity
Will it cost similar to the squares? 🤓🤗
This is sick. So awesome!
Efectiva, eficiente y versátil. ¿Qué otra sorpresa nos ocultas?
¡Excelente adaptación!
Interesting design, I assumed it made more sense to keep the blade on the sliding table for simplicity sake. Seems kinda scary, u think some sort of guard attached to the fence would make it a little safer?
VERY good my brother, can you sand me plan for this saw machine, please,
heavy metal saw ;)
I really like the idea !
brilliant. genius!
Nice nice!
Great thanks for your videos
A greeting from Spain
Genius
Plans???
Great work bro
❣️👍❣️
Very good
Видео из рязряда «my English is very good!». А так огонь!
Mirock's Woodshop я наоборот очень похвалить хотел! Очень зашёл именно мне такой вариант!
А, тогда сорри. Некоторые пишут - у тебя же акцент!
Mirock's Woodshop ну у тебя так же руки и ноги. О каких логичных вещах ещё они могут написать. Акцент не акцент пусть попробуют сам снять видео.
@@mirockswoodshop ну да акцент, но и голова и руки, и все гормонирует друг с другом!
next dream...cnc controlled fences and saw !!!
Akurat mam zamiar zrobić piłę stołową, chyba zmienię projekt 😁
Very cool!
you are a genious !!!
Very nice!
Dear Mirock,
Surely you meant by 900 mm & not 90mm. As for your table saw as it currently stands; it's a highly original design that truly merits the title of built by "Master Inventor". It's most unusual to reverse the order in which traditional table saws work but clearly you saw something that most of us miss & you've succeeded in exploiting to it's full effect. I feel kind of relieved that you've not been hired by the department of defense, I can only imagine the jaws of seenior officals dropping as you unveil your latest creation. It would more than just turn heads that's for sure. Very well done. Kind regards. P.S: Now do you think you could make something for Honourable wife that would get her talking to all the neighbours for weeks on end???
You are right) 900 is correct. i always tangled in numbers). I glad you keep eye on my blog)
@@mirockswoodshop Dear Mirock,
Thank you very much for your courteous & hearted reply. Rest assured someone like you is under very close scrutiny indeed. Many thanks & kind regards.
Hello. When you gona sale the dovetail jig
still thinking do better
@@mirockswoodshop all ready good men. Even 1 model as well se let's do
Nice!
Love your uploads and really liked the idea of a portable precision saw, however haven't you just made an upside down, non portable track saw? Strikes me that straightening that edge, and cross cutting the end, would have been easier and probably quicker with the track on top of the board, as the track saw was designed...
This looks great for very accurate small parts, but for big parts/boards it just seems a bit pointless? With a long track you can straighten an edge over twice as long as that board.
Love the engineering none the less.
Agreed, my first thought when I saw it was I've got to have one and then I realised I already do exactly that operation with a regular track on top of the board. I think this would probably be slightly faster for setting up a parallel cut (once the right hand fence is in) but you'd be talking seconds faster and this design limits the saws cut length. Like all Mirock's projects the engineering is great but I can't help feeling this problem is solved.
Yes Joel, but here is functional of upsided down track saw but not only. It is not main goal but just additional profit from decision of attaching to the worktable. More advantages will be obvious when big protractor fence will be mounted.
Концовка фильма также супер!!! 👍
Shut Up And Take My Money!
Perfeito,beautiful
Красавчик 👍
Мне послышалось или у автора действительно акцент русский и он русско - язычный?
@@vadimego а ето уже спросите у самого автора,и узнаете от него лично.)) Может и правильно послишалось
Украинский
@@mirockswoodshop Дякую брат, значит не показалось!) Всех благ Вам брат славянин!
👍🇹🇷 это ютуб виноват Видео загружено 20 минут назад а коменты 20 часовые ?
interesting
👏👏🇲🇽
I enjoy your videos thanks. I ask you to consider: a homemade table saw is dangerous and unpredictable. It you get it wrong just once you could be seriously injured.
@Mark Hill I ask you to consider: a factory made table saw is dangerous and unpredictable. It you get it wrong just once you could be seriously injured. I enjoyed the video too.