BROTHER TN1000 TN1050 HL1110 Toner Cartridge Refill Instructions
HTML-код
- Опубликовано: 5 окт 2024
- How to remanufacture Brother toner cartridge TN-1000 TN-1020 TN-1070 TN-1030 TN-1040 TN-1060 TN-1075 TN-1050
for use in DCP 1510, DCP 1512, DCP 1518, HL 1110, HL1111, HL1112, HL 1118, MFC 1810 MFC 1815, MFC 1818
Activate subtitles in your language! -
Things required:
Toner vacuum or compressed air
Screwdriver
Needle nose pliers
Toner for Brother TN1000 TN1050 (40 grams)
Reset gear (optional) for the starter cartridge
Isopropyl alcohol
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
www.linkaccesso...
email: link.accessori@libero.it
other links:
www.emmegiricam...
www.brother-usa...
-------------------------------------------------------------------------
Thank you so much brother. Rightful knowledge I got from this video, the same I am facing.
Thank you very much. It is really very informative with your clear explanation step by step.
thanks a lot! it was such a big help. :)
Até que enfim achei alguém que explicou direito.
Thank you very much
Good job.....
Thank you for the guide, but may I ask if the toner is just powder and no need to pour it with a little amount of water... I'm sorry but I am just confuse if the toner itself as powder is as to refill in the cartridge? Thank you.
No water, add only the powder. The water would destroy the cartridge
good info tnx i did did this but quality of the prints very lite..cant see even words...why ..how can i incress the qulity or darkness...dcp 1610..tn 1050
Is the drum unit worn? Check the drum unit
Hi, do you need to buy a new cartridge to refill? Or you can refill the old cartridge?
You can refill the old cartridge
Thinks
Hi sir,
I have brother DCP 1514 with TN 1020 printer I want to know about how to fil it
What kind of cloth do you use for cleaning the developer roll? Can we rub it like that? I thought that would damage it
A normal cotton soft cloth will work. If you carefully clean it, the roller will not be damaged
@@viandant5 Can we use microfiber cloth?
I have a problem and make reset to hl-1110 sprocket put in, and everything I fold and close the printer flips and jumps sprocket. A reset does not report it was still empty toner. Thanks for the advice
rotate manually the developer roller of the cartridge, and watch what happen. if it's blocked, may be the blendig rod inside the cartidge is blending or broken
viandant5 I had to cut out the plastic sprocket printer is no longer functional. Thank you for your willingness to ...
www.tonersyp.cz/grafika/navody/brother1030/startovaci.jpg
www.tonersyp.cz/grafika/navody/brother1030/kompac.jpg
viandant5 thanks for reply but my question is that can i refill and reset the starter toner without a gear? and will it work properly?
+Saeed Makawi yes, you can refill the starter cartridge, it will work same as a standard cartridge
thank you.
I have a brother printer HL 1210 w , for refiiling cartridge which ink should be used?
no ink, it's not an inkjet cartridge, it's a toner cartridge.
Dear Sir,
I have Brother 1510 with TN 1000 starter toner without resetting gear. Kindly, would you tell me how to refill and reset it without the gear?
+Saeed Makawi in this cannel you'll find a video that explains how to reset your cartridge without the gear
viandant5
Hi! Previously I installed reset gear in my free toner and it worked perfectly. Now I refilled the same toner with the same reset gear but the printer always prompts low toner.. (printer is brother HL 1110)
help!
Alma Marie Servito
try this:
1 turn off the printer
2 hold and keep holding the power button
3 when the lights are lit, open the printer cover. continue to hold power button
4 remove drum unit with the toner cartridge
5 release the power button
6 Reinstall the drum unit with the toner and close the cover
7 push 2 times power button
8 wait some seconds
9 push 6 times power button. now the toner should be reset
You're a life (and money) saver! Now I can print the materials I need for the bar review..
thank you, thank you, thank you! :)
Alma Marie Servito Happy to help you, have a nice day
@@viandant5 Thanks, it works .
Hi. Good video. I´ve a problem, after refilling, the printer stops every 3 sheets and starts again before 5 seconds. How can I fix this?
I already reset the printer pressing 6 times the power button an also 7 times, but the problem is still there.
Thanks.
+Luis Gutierrez try the reset procedure of this video ruclips.net/video/5V3CQrYh5IE/видео.html
+viandant5
As I told you before in my first comment, I already tried de reset procedure you are suggesting me (pressing 6 times the power button on a HL-1112), but the problem is still there. It´s very strange. Thank´s anyway for your help.
my printer works fine without the reset gear, what the reset gear for?
It will work fine until it reach the number of copies related to that cartridge. then you'll have an error message
good evening sir, i use brother Hl1000 , myself topup and change gear 1st work after 2nd time print no clear print ...i check status drum...90 % Toner 0%. what i do next
I think you have to reset the toner cartrdge using the gear
My Printer is DCP1511 with TN 1020. i replaced my toner cartridge but still not getting good quality print. print quality is very light or bad. plz help me
+Prabhakar Yadav May probably it depend from a defective drum unit
dear sir i am using DCP 1514 printer. i rifilled the cartridge but it didnt work. display continue showing toner ended. plz help
+Anuj Kumar ruclips.net/video/5V3CQrYh5IE/видео.html here you'll find instructions on how to reset the cartridge
What problem will account when we use the left toner again?
it's waste toner, you could have grey backgroud and low quality prints
@@viandant5 i thought there is a problem with the catridge, it print very light gray the whole page after I fill with 30gr new toner without cleaning left toner inside. Thank you so much, I will clean and refill
My printer is DCP 1510 with TN 1000. I refilled my toner but Printer doesn't respond to refilled toner. It always displays low toner. Help me here
+Sandeep Gyawali Try this:
push MENU button
push DOWN ARROW until you see in the display "INFO" or something so.
push OK
push DOWN ARROW until "RESET DRUM"
hold and keep holding OK until on display apper "RESET"
push START button
push UP ARROW until "10"
push OK. it should appear "ACCEPTED"
push STOP button until back to MENU.
what is the problem dull or light printing in left side?
May be the drum unit is out of position, a part of the toiner cartridge keeps the toner roller far from the drum. Are you sure the cartridge has been installed in the right way?
is there particular toner to use ?
many kind of universal brother toner work
please tell me
how gear reset in brother tonner
+Anil Dhiman fow the video, you'll find the position of the gear
hello. My printer is printing but paper is dirty :/ black lines, dots. whati have to do?
may be the problem is related to the drum unit. Try cleaning it, it's simply to disassembly
thanks, i'll do it
what is function of the reset gear exactly
the reset gear reset the printer counter memory.
U disassembled it and I didn't find how it gets connected
Wael Badr it gets connected with the printer. there is a gear in the printer that engage the cartridge reset gear
Hans Landa the starter cartridge comes with new printers, and the counter of new printers is zero.
why waste the exising toner
It's waste toner, it could cause grey background on the sheet
@@viandant5 have you tried it? If it is black toner, and excess, then it's sill black, no?
@@ArjayMartin The waste toner in Brother techonology return back to the cartridge, that's why there is not a waste toner container. So at the end of the cycle of the cartridge, inside it there is waste toner
@@viandant5 that can be used again anyway
Buen video, contamos con todo para recargar este cartucho, o cartucho completo en 230.00 mx, mas info: www.imprimemax.com.mx/
Hi sir,
I have brother DCP 1514 with TN 1020 printer I want to know about how to fil i
Hi sir,
I have brother DCP 1514 with TN 1020 printer I want to know about how to fil it
You can use these instructions