Thanks for amazing video. I am having same problem, mechanic said to replace master cylinder but the issue wasn't resolved. Now I'll get the slave cylinder replaced. Hopefuly it gets fixed.
Same problem with my car i20 petrol replaced the pressure plate clutch plate n then sleeve cylinder but hard clutch problem got solved but in hot weather or after running 100 kms plus the clutch is sticking a little to the floor while gear changing for 5-10 min.
@@abhinavsood177 are bhai ye problem mere sath thi main bht pareshan tha...jo iska genuine solution h vo ye h...iska slave cylinder khrab ho gya h.. Srf use change kra lo..
Heloo sir yai jo ap yellow colour ka dot3 break oil use kr rhe yai konsi company ka hai plz puri information dijiye ..muje meri i20 mai dalna hai or usme phle se jo dala hua vo company se dala hua yellow colour ka or mai bahar se jab lene gya to shop vale bolte hai dot3 to red he aata h .
Thanks for detailed clarity, I have xcent CRDI 1.1, 2015 model. I have frequent clutch jam/sinking to floor problems since last 10 months. Master cylinder & slave cylinder changed 3 time. It started after 57000 km. Currently driven 59000 km. hyundai service center or local mechanic could not rectify. Now it is scary to drive. Please guide
@ chetan Pressure plate problem. First change clutch assembly and then change slave cylinder. If u want to check practically. Just remove slave cylinder and then try to move back and forth of clutch fork by hand. If fork is unable to move or hard then its confirmed that clutch assembly need to be replaced. If not check for oil leakage of clutch pipe and check oil level.
I had similar problem with my Hyundia i20 year 2009model made in India and many times I had to stop driving as my clutch pedal drops to the floor and after a few seconds it comes to normal I could drive again. After I tried all the options by changing the master cylinder and the slave cylinder and the clutch full kit I spoke to a different mechanic and told me that the problem was due to the rod that moves the trust bearing as it was sticking and it don't return back as it sticks while it start to return to it normal position.I used the spray penetrating oil and did work better .I started to use my car more often as I use to leave it in my garage for a long time and used my other car.Now it is working better. You can try another way I would suggest to add a return spring to the arm of the fork rod as a return spring as a modification.This is my idea to try for next time if i still have again the same problem.
Bro, I have i20 elite petrol 2020spe model When am driving the clutch pedal sudenly getting hard in the middle of trafic Now under warranty So what to do . How can I solve the issues.. I bought from used cars showroom It may be not used or running atleast 20days. Could you please tell me what kind item of parts i need to change? What's the solution for this compliant not come again?
clutch slave cylinder for i20 2010 1.2l model is not available any where ..so can you please tell if it is available in your service centre ..?? I am From Ranchi Jharkhand.
Sir, my car i20 1.2 clutch pedal stick to floor during engine running. I stopped and wait about 15 minutes, and it works again. The problems arise very soon during traffic jams. But in highway it's ok. Please kindly help.
80% of this problem is happen due to clucth sleep cylinder , some cases master cylinder too. I want suggest you that replace clucth sleep cylinder then your problem will solve.
@@thenextgenerationengineers2834 sir, the slave cylinder was changed at 35000 km with new clutch sets fully. And till now, around 10000 km has been running ie 45000 km now. Is the master cylinder bad or still slave cylinder?? No oil leakage, physical damaged anywhere. All ok.
@@tnamen1307 pedal pressed to floor it means oil leakage somewhere or non recommend brake oil or non genuin e spares installed. Or minor oil leakage in clutch pipe or air in the system.
Same issue I got twice for my elite i20, first time replaced both sleep cylinder & master cylinder in Hyundai service..after 1 year I got the same issue again, now third-party service center guy suggested to change sleep cylinder
Got both cylinder replaced for 4500. Used after market parts. Original parts were not available due to Covid . Make sure the length of pin in slave cylinder is exact. Mine was 5mm smaller and will be getting it replaced with original Hyundai part soon
If you are driving and car stopped in midway...just take a bottle of water and pour it on that cylinder...It will help you.... I faced the same problem and this small hack will help
Bhai Meri accent my I have changed both master cylinder and sleeve cylinder and even clutch plate also changed but phir b car running hone par clutch pedal hard hojata hai Q Kya problem hai please tell me bhai wT to do ?
Hi thanks for the detailed information, I have Verna 2006 1.6 Petrol model, I facing the same issue after 100km clutch padel will loose and having problem in gear shifting too and problem in starting the after 100km, I have to wait 15mins after that clutch padel will normal car will start normally. Please suggest what is the solution for this and I am away from my home and stuck.
Sir bahut badiya Vedeo same problem my Verna Abhi kuchh din pahle clutch cylinder change karaya kya sir aur bhi kuchh change karana payega ab bhi chipak raha hai aur hard bhi ho raha hai
Mere swift 2016 model me bhi yhi problem hai, gaadi garam jab hojati hai fir clutch hard hojata h toh kya yhi problem h? Service centre bolte h clutch pura change hoga खर्चा aaega 10000 tak kya karu ab
Bhaia verna fluidic ki clutch set 30000 pe change karwaya tha, ab 50000 par clutch bahut hard lagta hai thoda chalne ke baad....kya solution ho sakta hai
Brother meri i20 car hai 2009 model 40k kms driven..thoda chalne ke baad clutch hard hojaata hai aur gear engage nahi hota phir thoda time baad thanda hota hai toh clutch kaam karta hai...maine dono master cyclinder and slave cylinder change kar diya par wo he problem horahe hai.
Good day sir.can you help me to solve the problem of my hyundai eon.i already change my clucth set 2 times but still so hard to shif in 1st and 2nd gear.what is the posible problem?i try to adjust it been ok .but after few hours riding is back to shif hard the gear.hope you help me.thanks
Hiii brother my gear is becoming hard after going some kms and clutch is going down gear daalna mushkil ho raha hai is it clutch cylinder problem? I have geely emigrand ec 7 model can u help me out?
Bhai shib 4times cylender change kar liya hai bar bat eisa kion hota hai? - cylender change karna koyee solve nahi hai fir gadi 20/50km mts runing k se fir vahi condition ho jati hai. Fault kahan se kiyon and kaise thik hoga please resurch kar ke vidio banao.
Bro I had gear shifting hard problem and clutch goes down at same time for Hyundai getz 2005 model how can I resolve it and how much cost it will be pls reply facing more problem
Honda prelude model 2000. Uska esa problem arha ha kuch km chalne k bad clutch hard horha ha phr 2 3 hrs gari stop kardo to bilkul normal hojata ha. Is model me bhi hydraulic clutch system hai kia?
Mene master cylinder apni city ka change Karaya tha. Slip cylinder wou Purana Wala sai tha. Ab jab car cold Hoti he to start me Thora masla hota he. Phr sai chaltu he garam ho k
same problem with my i20 kya ye break oil leak hone se bhi esa problem ho sakta he ? meri car ka break oil bhar te he waha niche ek valve se leak hota he oil thoda sa
Bhai mera pass safari dicor h.. Usme yah prblm ho raha h ki gadi start krne k bad koi v gear nahi lag raha h gear hard ho jara h.. Band gadi Mai gear lag rahi h... Aur infact gear mai gadi start ho rahi h Aur agay v jaa rahi Lakin gear change nahi ho rahi h.. Gadi Mai kiye prblm aii hogi
Hi , I have verna fluidic (petrol 68000), here I m also facing clutch hardness problem but pick up is very good, coz of hardness my legs got pain in heavy traffic please suggest me what will be solution ...
Hi sir this is useful video👍 I have a another one doubt ! While I was driving after 30 mins Engine was hot that time clutch pedal was hard and not working and after 10 mins clutch is working ..
Shrey bhai engine ka problem hone k darun se ye hota hain.... But pahele up engine ka thik se tuning karwao. O2 sensor clean karwao. Map sensor ko vi. And fuel ko akbr check karlo.. Asb kam tumhara around 800 - 900 me ho jayega.
Eske bad agr na hoga to engine ka compression ko check karlo. Agr usme prblm hain to pata chal jayega. But pahele jo kam bola wo pahele kawao i think usmain solve ho jayega
Hallo Bhai, mere gaddi main gear shifting hard hain lekin clutch nahi .. jab gaddi thandi hoti hain tu gear easy hota hai, par kuch chalne ke baad hard ho jata hain 😔
If your car have pressure plate problem then cluth system always remain hard.... If clucth cylinder problem then clucth will be hard only hot conditions or after run some km.
Bro my car is 2019 model i20 sportz plus petrol 3024 meter reading. After 2 or more more weeks of time, took for a drive about 350kms including (ghats road) All of a sudden when i had to park car, ignition was off , when tried to move clutch suddenly failed to engage and became fully loose with some sort of sound. Rested vehicle sometime and brought down about 85kms nearest service centre After 1 day of fully rest, car is working fine now But no pickup in 1st and 2nd gears, clutch is hard Any idea what is really wrong?
Hi sir i changed my clutch plate, pressure plate and release bearing of Suzuki swift zdi 2012.i used Original release bearing but i used valeo clutch plate after that my gear shifting get very hard like truck in every gear. What should I do please suggest.sir mera clutch hard nehi hai bilkul but gear shifting bahot hard hai.
Sir my problem is that clutch pedal is not hard in my car but gear is stucking after heating So please tell me which part is not working properly!.... Plzzzz sir
Hi Bhai Me i20 2009 1st hai kuch din pehale mere i20 ka sleep cylender leak hua tha to mene use change kiya to 10 din baad gear shipting hard ana chalu hue hai...pl rply me
@@thenextgenerationengineers2834 Jis din cylender change kiya uske 2 4 din gadi thik chali or uske badse problm chalu hua hai..gadi strt krte hee thode hard ate hai or thodi km ke bad to bhut hard ate hai
@@thenextgenerationengineers2834 sir ji...faced this problem first time only while driving in very hot summer continue to 4-5 hrs . lucknow Agra express way....but after some temp decrease in evening the problem was gone and uske bad maine 200 km continue cahalaya no problem....so abhi prbl kidher hai samjh me nhi a rha ..
@@its_dsa bhai swift 2016 petrol model h, hydraulic clutch diesel me aata hai jisme slave cylinder hota h, toh meri gaadi me kyu h ye problem aur kya solution h petrol gaadi me
Hi mere pasme Hyundai i20 h or meri car 5 ya 10 km chalne bad clutch paddle rukkar aata h or kuch der m bilkul free ho jata hai phr jab m car off krke on krta hu to bht hard ho jata h agar m car ko 15 ya 20 minute off rkhta hu to thoda normal hota hai to m uske lea kya kru jisse meri ye problem ekdum sahi ho jae ?
Even after changing my master cylinder and slave cylinder my clutch is getting hard after driving for 30minutes. When I start driving it runs smooth. But after 30 mins clutch pedal gets hard and then the entire clutch becomes false and I can’t drive. Please help. I have a Hyundai Getz prime 1.3 gls.
My I20 has the same issue, I changed both maser and slave cylinders but after a few kilometers clutch pedal get spongy, did you refill the brake oil, if yes is your problem resolved?
I made the biggest mistake of my life by buying an i20. The clutch pedal breaks down every 1-2 year. I have to replace sleep and master cylinder 3 times already in 4 years. Because of the clutch breakdown I had to sleep on a mountain road all alone for two days... Fuck hyundai.
Thanks for amazing video.
I am having same problem, mechanic said to replace master cylinder but the issue wasn't resolved. Now I'll get the slave cylinder replaced. Hopefuly it gets fixed.
Helpful video. If I am right, sleep cylinder means SLAVE cylinder.
Thanks, was getting confused because of that👍
Acha vedio...Good keep it up.I have this problem with my Hyundai i20 petrol.
Yr i m also facing this problem..kya apki problem solve ho gyi...aur agr ho gyi to mjhe b btaiye that how..??
I also have i 20 petrol.
Same problem with my car i20 petrol replaced the pressure plate clutch plate n then sleeve cylinder but hard clutch problem got solved
but in hot weather or after running 100 kms plus the clutch is sticking a little to the floor while gear changing for 5-10 min.
@@abhinavsood177 are bhai ye problem mere sath thi main bht pareshan tha...jo iska genuine solution h vo ye h...iska slave cylinder khrab ho gya h..
Srf use change kra lo..
Mera 2012 i20 petrol me bhi yahi issue hai... Pareshan ho chuka hu 2 baar clutch cylinder change kiya
Very informative..How to avoid this issue..i faced this issue today at a signal after a long drive....
Change new one otherwise change inside kit
Good yaar.. thnx alot. Mai kbse is problem Mai tha. Thnx to u for the solution.. mere mechanic ne to bohat paise zaya krwa diye😒
Bhai mere mechanic ne b bht paise kharch krwa diye abi tk yehi prblm h.
@@saddamalam1454 ab to is video Mai clear ho gya hai.. change krwalo. Mai to change krwa k sakoon Mai hun
@@hashimsheikhvlogs ap mjhe apna number denge sir...main aapse discuss krna chahta hun zra is problem k baare mein..
Saddam vai ye clucth cylinder kai problem hain.... App change karwalo.
Heloo sir yai jo ap yellow colour ka dot3 break oil use kr rhe yai konsi company ka hai plz puri information dijiye ..muje meri i20 mai dalna hai or usme phle se jo dala hua vo company se dala hua yellow colour ka or mai bahar se jab lene gya to shop vale bolte hai dot3 to red he aata h .
Thanks for detailed clarity, I have xcent CRDI 1.1, 2015 model.
I have frequent clutch jam/sinking to floor problems since last 10 months. Master cylinder & slave cylinder changed 3 time. It started after 57000 km. Currently driven 59000 km. hyundai service center or local mechanic could not rectify. Now it is scary to drive. Please guide
Kindly change the entire brake oil
@ chetan Pressure plate problem. First change clutch assembly and then change slave cylinder. If u want to check practically. Just remove slave cylinder and then try to move back and forth of clutch fork by hand. If fork is unable to move or hard then its confirmed that clutch assembly need to be replaced. If not check for oil leakage of clutch pipe and check oil level.
I had similar problem with my Hyundia i20 year 2009model made in India and many times I had to stop driving as my clutch pedal drops to the floor and after a few seconds it comes to normal I could drive again. After I tried all the options by changing the master cylinder and the slave cylinder and the clutch full kit I spoke to a different mechanic and told me that the problem was due to the rod that moves the trust bearing as it was sticking and it don't return back as it sticks while it start to return to it normal position.I used the spray penetrating oil and did work better .I started to use my car more often as I use to leave it in my garage for a long time and used my other car.Now it is working better.
You can try another way I would suggest to add a return spring to the arm of the fork rod as a return spring as a modification.This is my idea to try for next time if i still have again the same problem.
Can u pls help me for the same ....but why this issue comes after replacing new cylinders also....is it due to less running of car?
Thank-you so much Sir
For this helpful video and complete information . 🙏
Bro, I have i20 elite petrol 2020spe model
When am driving the clutch pedal sudenly getting hard in the middle of trafic
Now under warranty
So what to do .
How can I solve the issues..
I bought from used cars showroom
It may be not used or running atleast 20days.
Could you please tell me what kind item of parts i need to change?
What's the solution for this compliant not come again?
clutch slave cylinder for i20 2010 1.2l model is not available any where ..so can you please tell if it is available in your service centre ..?? I am From Ranchi Jharkhand.
Kya old verna me i20 ka slip syilender pad jayega
Aap ne bahut achhe tarik se bataya thanku sir but sleep cylinder kharab hone ka karan kya hai.
Sir, my car i20 1.2 clutch pedal stick to floor during engine running. I stopped and wait about 15 minutes, and it works again.
The problems arise very soon during traffic jams. But in highway it's ok. Please kindly help.
80% of this problem is happen due to clucth sleep cylinder , some cases master cylinder too.
I want suggest you that replace clucth sleep cylinder then your problem will solve.
@@thenextgenerationengineers2834 sir, the slave cylinder was changed at 35000 km with new clutch sets fully. And till now, around 10000 km has been running ie 45000 km now. Is the master cylinder bad or still slave cylinder?? No oil leakage, physical damaged anywhere. All ok.
Same problem with me
@@tnamen1307 pedal pressed to floor it means oil leakage somewhere or non recommend brake oil or non genuin e spares installed. Or minor oil leakage in clutch pipe or air in the system.
Same issue I got twice for my elite i20, first time replaced both sleep cylinder & master cylinder in Hyundai service..after 1 year I got the same issue again, now third-party service center guy suggested to change sleep cylinder
Meri i20 me same problem hain. Keya up mujhe bata sakta hai yeh thik karne k liye total kinta kharcha par sakta hai?
Hello sir accents petrol 2011 model he uska cylinder kitne ka ho ge
Got both cylinder replaced for 4500. Used after market parts. Original parts were not available due to Covid . Make sure the length of pin in slave cylinder is exact. Mine was 5mm smaller and will be getting it replaced with original Hyundai part soon
Aftermarket in any part for emergency use only. Aftermarket causes big problems
Yes replaced the after market master cylinder again as it was causing problem randomly while changing gear
kya problem ayi thi appko jo ye change krwana pda
Brother good explanation.. i10 also have clutch sleep cylinder
Old slave cylinder me air nikalne se problem solve ho jayega ya nahi Ya fir naya cylinder hi lena hoga
Sir i have i20 2010 model ka clutch press karne main kus awas nhi hai par clutch release karne main ek awas ata hai gearbox main kuch problem hai kya
Sir micra car ka clutch kit replacement cost kitna atha with labour
thank you for the informative helpful video
I don't understand Hindu but your explanation is good
it would be great if you ad some English subtitles.
If you are driving and car stopped in midway...just take a bottle of water and pour it on that cylinder...It will help you.... I faced the same problem and this small hack will help
Yes sir:::!!!right .
i10 megana me a silandar hota hi?
Bhai Meri accent my I have changed both master cylinder and sleeve cylinder and even clutch plate also changed but phir b car running hone par clutch pedal hard hojata hai Q Kya problem hai please tell me bhai wT to do ?
Very nice video sir keep it up 👌👍🌟💕
Hi thanks for the detailed information,
I have Verna 2006 1.6 Petrol model, I facing the same issue after 100km clutch padel will loose and having problem in gear shifting too and problem in starting the after 100km,
I have to wait 15mins after that clutch padel will normal car will start normally.
Please suggest what is the solution for this and I am away from my home and stuck.
Sir bahut badiya Vedeo same problem my Verna Abhi kuchh din pahle clutch cylinder change karaya kya sir aur bhi kuchh change karana payega ab bhi chipak raha hai aur hard bhi ho raha hai
Mere swift 2016 model me bhi yhi problem hai, gaadi garam jab hojati hai fir clutch hard hojata h toh kya yhi problem h? Service centre bolte h clutch pura change hoga खर्चा aaega 10000 tak kya karu ab
Hundai should find solution to this issue. Most of i20 cars having unique issues
Hello, How I can adjust Hyundai i10 grand diesel hydraulic clutch? i10 grand 2015 model ka hydraulic clutch adjust kaise kare?
Hydraulic clucth kabi adjust nahi kar sakte
@@thenextgenerationengineers2834 hmm.. some time reverse gear hard shift, don't know the issues. I fill clutch play is approx 2 inch.
Sir mere pass Tata sumo gadi ka pedals push karte samay vo niche rahte tb problem ky hai sir
Major di jeep me kaise clutch pedal ko tight kare
It's slave cylinder not sleep cylinder 😊😊😊
Bhaia verna fluidic ki clutch set 30000 pe change karwaya tha, ab 50000 par clutch bahut hard lagta hai thoda chalne ke baad....kya solution ho sakta hai
Bhai cylinder change karwaye the 30000 me?
@@thenextgenerationengineers2834 nahi bhaia wo nahi karwaya
Ab cylinder pahele change karwao
Is there warranty for master cylinder and slave cylinder?
Did you got this answer?
Kabhi stering calibration pe v video banayiye.
I have Indica Vista petrol while shifting from gear 2to3 and back grinding noise comes as no clutch pedal pressed
Kindly advise how to repair this problem
Brother meri i20 car hai 2009 model 40k kms driven..thoda chalne ke baad clutch hard hojaata hai aur gear engage nahi hota phir thoda time baad thanda hota hai toh clutch kaam karta hai...maine dono master cyclinder and slave cylinder change kar diya par wo he problem horahe hai.
Apki car cng hai
Same problem in Innova इनोवा के बारे में बताएं क्या करना होगा गर्म होने पर ही गियर रखते हैं ठंडी होती है तब आराम से आते हैं
Bro, can u show us how to replaced the master cylinder too. It will be helpful to many viewers🙏
Thank you.
Ok.
भाई मेरे i20 magna 2014 petrol में सेम प्रोबलम है तो clinder नया डाल दु
लेकिन oil dot 4 डालू या dot 3 बताओ
Abi konsa use kr rhe ho
Good one worth watching 👍
Thanks
Clutch plate is very hot in hyundai accent car whe went trip in Mysore it became like this what to do
Repair Kit where it is available....???
Good day sir.can you help me to solve the problem of my hyundai eon.i already change my clucth set 2 times but still so hard to shif in 1st and 2nd gear.what is the posible problem?i try to adjust it been ok .but after few hours riding is back to shif hard the gear.hope you help me.thanks
Hiii brother my gear is becoming hard after going some kms and clutch is going down gear daalna mushkil ho raha hai is it clutch cylinder problem? I have geely emigrand ec 7 model can u help me out?
Bhai shib 4times cylender change kar liya hai bar bat eisa kion hota hai? - cylender change karna koyee solve nahi hai fir gadi 20/50km mts runing k se fir vahi condition ho jati hai. Fault kahan se kiyon and kaise thik hoga please resurch kar ke vidio banao.
Bro I had gear shifting hard problem and clutch goes down at same time for Hyundai getz 2005 model how can I resolve it and how much cost it will be pls reply facing more problem
Honda prelude model 2000. Uska esa problem arha ha kuch km chalne k bad clutch hard horha ha phr 2 3 hrs gari stop kardo to bilkul normal hojata ha. Is model me bhi hydraulic clutch system hai kia?
Ha bhai usme app ka es cylinder ka problem hain....
hello sir.. is Clutch Slave Cylinder covered under warranty ?? i20 (P) 16500 km, 1 year 2 month
Gari ka running km kam ho to waise warranty ho jata hain. But usme kuch condition rahete hain.
@@thenextgenerationengineers2834 thank you sir
@@sukumarsaren9733 Bhai ye issue warranty me cover hogaya hoga to hume batao
Mene master cylinder apni city ka change Karaya tha. Slip cylinder wou Purana Wala sai tha. Ab jab car cold Hoti he to start me Thora masla hota he. Phr sai chaltu he garam ho k
Kiy bol raha hai chomu😂
same problem with my i20
kya ye break oil leak hone se bhi esa problem ho sakta he ?
meri car ka break oil bhar te he waha niche ek valve se leak hota he oil thoda sa
Ha ho ta hain.
Bhai mera pass safari dicor h.. Usme yah prblm ho raha h ki gadi start krne k bad koi v gear nahi lag raha h gear hard ho jara h.. Band gadi Mai gear lag rahi h... Aur infact gear mai gadi start ho rahi h Aur agay v jaa rahi Lakin gear change nahi ho rahi h.. Gadi Mai kiye prblm aii hogi
Grand i10 CRDI pickup problem Kya Kare ?? 5 yr old hai gadi
Discel ya petrol
Good topic 👍
SLEEP cylinder nahi isko "Slave Cylinder bolte hain" Ek Master ek Slave. No Sleep
Nice vlog master giii
I have facing this problem.Thanks
MANY THANKS FOR SHARING
Hi , I have verna fluidic (petrol 68000), here I m also facing clutch hardness problem but pick up is very good, coz of hardness my legs got pain in heavy traffic please suggest me what will be solution ...
Replace pressure plate, including clucth plate
@@thenextgenerationengineers2834 thanks for reply
Vry informative video bro
bhai where is your garage
Hi sir this is useful video👍
I have a another one doubt !
While I was driving after 30 mins Engine was hot that time clutch pedal was hard and not working and after 10 mins clutch is working ..
Clucth cylinder ka problem.
Gear hard hai boht sir slave sylonder me ajaj aaa rhi jab clutch dba ehe
Bhai I20 diseal me kis tarah ka clutch hai?
Hadrolic
Hydraulic clucth system hain bhai.
Bahi santro car spark plug black kr rhe h kya dekat ho skte h
Or kuch problem ho raha hain?
Jaise knocking, vibration? Smoke?
Only milage kam h thodi
Shrey bhai engine ka problem hone k darun se ye hota hain.... But pahele up engine ka thik se tuning karwao.
O2 sensor clean karwao.
Map sensor ko vi.
And fuel ko akbr check karlo..
Asb kam tumhara around 800 - 900 me ho jayega.
Eske bad agr na hoga to engine ka compression ko check karlo.
Agr usme prblm hain to pata chal jayega.
But pahele jo kam bola wo pahele kawao i think usmain solve ho jayega
Ok bahi tnx
Liked the video...
But still I have a question..
Does air really gets trapped inside hydraulic system??
Clutch ka is problem k waja se engine overheat ho sakta hai keya?
No.
cost kitna hota he ?? master & sleep cylinder both agar change kare to
Bhai approximately 10k.
@@thenextgenerationengineers2834 Thank you Bro
Sir 3 gear jab dhall tee hai to kyi baar awaj si krta hai kyaa problem hoggaa
Clutch ka condition kaisa hain?
@@thenextgenerationengineers2834 thiik thaak hai sir
3gear hi krtaa hai sound voobbii kabhi kabbhii zaida problem nhi detaaa koee solution batyyee sirr
Verna fluidic
Bhai akbr uska gear cable adjust hota hain wo akbr karke dekho.
What is cost for slip cylinder and master cylinder
6000 for master and 3500 for slave cylinder ..same problem in my i20 petrol
मेरी भी i20 में यही समस्या है। slave cylinder भी नया डाल दिया है लेकिन फिर भी प्रोब्लेम ठीक नहीं हुई है। अब क्या करना होगा।
Hallo Bhai, mere gaddi main gear shifting hard hain lekin clutch nahi .. jab gaddi thandi hoti hain tu gear easy hota hai, par kuch chalne ke baad hard ho jata hain 😔
Pura clutch system replace karne ka cost kitna padega service center me?? Please reply
Sir brake marne se brake jaldi se release nahi ho Raha hai so drum heat ho Raha hai ALS vehicle
Wheel cylinder Or caliper piston jam ho sakta hain.
How to differentiate this problem with pressure plate problem?
If your car have pressure plate problem then cluth system always remain hard.... If clucth cylinder problem then clucth will be hard only hot conditions or after run some km.
Bro my car is 2019 model i20 sportz plus petrol
3024 meter reading.
After 2 or more more weeks of time, took for a drive about 350kms including (ghats road)
All of a sudden when i had to park car, ignition was off , when tried to move clutch suddenly failed to engage and became fully loose with some sort of sound.
Rested vehicle sometime and brought down about 85kms nearest service centre
After 1 day of fully rest, car is working fine now
But no pickup in 1st and 2nd gears, clutch is hard
Any idea what is really wrong?
But ye prblm kiu ata?
Hi sir i changed my clutch plate, pressure plate and release bearing of Suzuki swift zdi 2012.i used Original release bearing but i used valeo clutch plate after that my gear shifting get very hard like truck in every gear. What should I do please suggest.sir mera clutch hard nehi hai bilkul but gear shifting bahot hard hai.
Sir my problem is that clutch pedal is not hard in my car but gear is stucking after heating
So please tell me which part is not working properly!.... Plzzzz sir
Hi bro u r explain is good first explain previous u informed which vehicle name tell and problems tell me next explain videos OK
Hi
Bhai
Me i20 2009 1st hai kuch din pehale mere i20 ka sleep cylender leak hua tha to mene use change kiya to 10 din baad gear shipting hard ana chalu hue hai...pl rply me
Gear shifting hard problem kya sirf kuch km chalne k bad ho raha hain.... Ya all time?
@@thenextgenerationengineers2834
Jis din cylender change kiya uske 2 4 din gadi thik chali or uske badse problm chalu hua hai..gadi strt krte hee thode hard ate hai or thodi km ke bad to bhut hard ate hai
Sir khbi
Key programing
Pr video bnayn plzz
Ik bhai
Clutch sleep cylinder ka price Kitna hai
Please batayiye 🥺🥺
Even after changing clutch and master cylinder problem is still there in my i20 please suggest
I'm facing the same problem on my i20. Let me know if you've sorted the issue
@@dishantpatil7 yes problem is sorted now just tell the macanic about issue they will service your cars cylinders
@@saiexplores6250 how much total cost
@@dishantpatil7 around 8k
@@saiexplores6250 warranty me cover hoga kya yah
Bhai...mera i20 me thora heat honesehi me clutch padal pura hard ho jata hain..
To kya change karna parega nd costing kitna ayega
Im also facing same problem
I have extra new clutch master cylinder and selav cylinder someone want
@@bindugavel4856 parcel me
Sir ji mai to exactly isi problem se presan hu...I 20 2013 model
Sleeve cylinder replace karna hoga bhai
@@thenextgenerationengineers2834 sir ji...faced this problem first time only while driving in very hot summer continue to 4-5 hrs . lucknow Agra express way....but after some temp decrease in evening the problem was gone and uske bad maine 200 km continue cahalaya no problem....so abhi prbl kidher hai samjh me nhi a rha ..
@@thenextgenerationengineers2834 kya खर्चा aaega sleep cylinder change krne me total andaza
@@DEEPtarun9 slave cylinder cost is 3500 original
@@its_dsa bhai swift 2016 petrol model h, hydraulic clutch diesel me aata hai jisme slave cylinder hota h, toh meri gaadi me kyu h ye problem aur kya solution h petrol gaadi me
Cylinder ka price kitna he
Hi mere pasme Hyundai i20 h or meri car 5 ya 10 km chalne bad clutch paddle rukkar aata h or kuch der m bilkul free ho jata hai phr jab m car off krke on krta hu to bht hard ho jata h agar m car ko 15 ya 20 minute off rkhta hu to thoda normal hota hai to m uske lea kya kru jisse meri ye problem ekdum sahi ho jae ?
Bhai pta chle to mjhe b btana...main b isi problem se pareshan hun...mere paas b i 20 h.
@@saddamalam1454 muje bi btana mere bi same problem ho rhi h
Thanks very much
Even after changing my master cylinder and slave cylinder my clutch is getting hard after driving for 30minutes. When I start driving it runs smooth. But after 30 mins clutch pedal gets hard and then the entire clutch becomes false and I can’t drive. Please help. I have a Hyundai Getz prime 1.3 gls.
Kindly replace entire clucth oil/brake oil
My I20 has the same issue, I changed both maser and slave cylinders but after a few kilometers clutch pedal get spongy, did you refill the brake oil, if yes is your problem resolved?
@@thenextgenerationengineers2834 hi, did u solve ur problem?
@@deepakkhadye2298 can you please tell how did it resolved
Ye problem Hyundai ma hi hai??
Hn yr meri hyundai i20 mein b yehi problem h.
Bhai ye thik ho jattaaa hai kuaa
Nice work bro
Thanks.
Price Kya he eska
I made the biggest mistake of my life by buying an i20. The clutch pedal breaks down every 1-2 year. I have to replace sleep and master cylinder 3 times already in 4 years. Because of the clutch breakdown I had to sleep on a mountain road all alone for two days... Fuck hyundai.
It's a huge loss to buy new one with 3000 so better buy the inner spring with 150 and fix it
Nice👌👌👌👌
Nice video.....sir
Thanks
Gaddi kon c hai
I 20
I 20 ka naya slip cylinder kitne Ka Aata Hai