بہت اچھے جناب محبوب بھائی و حفیظ بھائی۔ بہت اچھی معلومات شیئر کرتے ہیں۔ کمال کی ویڈیو ہے۔ میں بھی ایک انجینئرنگ یوٹیوبر ہوں اور انجینئرنگ سے متعلق ویڈیوز اپلوڈ کرتا ہوں۔
Bro, this is not Bharat scout guide reef knot... This is hardazous 230 Volts Ac. Breakdown of insulation due to ageing ,heat will create a short circuit. Don't share such ideas... please 🙏
I'm an electrician and this guy (person posting these videos) should not bother as he is not competent enough. The last video i saw was how to twist wires together, which is a nothing less than moronic!
Este vídeo es erróneo. Primero, no se estira de los cables, se estira de la clavija. Y segundo los cables tienen un radio de curvatura que no se puede exceder, no se puede retorcer un cable como uno quiera. Por último hay clavijas mejores que incorporan una retención para el cable. Por favor aportar ideas buenas, no chapucillas varias.
*HEY, WHAT STORY IS THIS? THOSE TWO SINGLE WIRES ARE OUTLAW, THE TWO WIRES MUST BE TOGETHER IN AN ONLY SHEATED CABLE, COMPOSED, IN FACT, OF THE SINGLE SHEATED WIRES, PLUS AN EXTERNAL SHEAT.*
Who in the world will use PVC cables meant for fixed installation to be used for external devices. Definitely the use of flexible cable with extra sheath for protection is recommended.
No heating issue. There will be a small inductive reactance which might reduce current very slightly but won't dissipate heat. In fact coiling a wire will reduce the heat it produces (compared to that same length of wire straight) by reducing the current flowing through it. Depending on where you are there may be code issues with "knotting" the wire (if this is knotting). In Australia the wires in an approved plug must employ a "pillar, post grip, torturous path or other effective means" to prevent their withdrawal from the plug. I believe this is to avoid damaging the insulation or wire in case of tension being exerted on the cable/plug.
Не вижу ничего криминального, но интуиция подсказывает, что переплетенные друг с другом и сами с собой провода выглядят не очень красиво и надежно. Может быть, существуют условия, при которых такая формация приведет к не очень хорошим последствиям
Без синей изоленты не канает.а если серьезно то используй кабель с двойной изоляцией и вилку с внутренним зажимом,а не это недоразумение.на крайняк стяжкой внутри зафиксировать.и что за прикол выдергивать вилку из розетки за провод. Ну у каждого "мастера" свои методы
If its a full cord with the sheath intacked the 2 cable sheath will not move but I suspect its just bits cable with no sheath wich will allow it to move
Con tus videos vas a causar muchos incendios breo, no necesitas ser eléctrico para saber qué produce más calor los cables juntos y pueden provocar un incendio
Twisted cable will generate heat because electromagnetic activity, i think use clamp cable is more safe rather than twisted it, use plug with clamp included.
This is the correct teaching on how to cause a fire
بہت اچھے جناب محبوب بھائی و حفیظ بھائی۔ بہت اچھی معلومات شیئر کرتے ہیں۔ کمال کی ویڈیو ہے۔ میں بھی ایک انجینئرنگ یوٹیوبر ہوں اور انجینئرنگ سے متعلق ویڈیوز اپلوڈ کرتا ہوں۔
Thanks
@@MehboobElectric
عمل جميل تشكر عليه
ولكن مؤسف انت لابس محبس التخلف والجهلة واللطامة.
If you use flexible wires (not a single solid wire) it is considered bad practice to put them into a screw terminal without ferrules around them.
प्लग वास्तव में साफ है, मास्टर, बढ़िया
ماشاءاللہ بہت خوب ایسی ڈی سی سیلنگ فین کو ڈائریکٹ سولر پینل سے چلا سکتے ہیں کہ نہیں بغیر سولر چارج کنٹرولر کے
yes 150w 1 plete
@@MehboobElectric جزاک اللہ
ماشاءاللہ سبحان الله الحَمْدُ ِلله
بہت خوبصورت
لابس محبس التخلف والجهلة واللطامة ... مؤسف
Bro, this is not Bharat scout guide reef knot... This is hardazous 230 Volts Ac. Breakdown of insulation due to ageing ,heat will create a short circuit. Don't share such ideas... please 🙏
😂😂😂
Эх как замкнет эти провода, когда оплавится изоляция
Согласен, автор явно об этом не подумал
Mal.
Esa forma de cruzar los cable genera un campo electromagnético y hace que los cables se calienten pudiendo generar un incendio.
Piola
Este tío no tiene ni puta idea. Es una chapuza de las que dejan huella.
Eso es una bobina 😂
Keep the wires separate ..
And safe
If you were to use the correct type cable in a certified plug top, you wouldn't need to do that.
I thought exactly the same...once again I'm happy to have the German VDE standarts
I'm an electrician and this guy (person posting these videos) should not bother as he is not competent enough.
The last video i saw was how to twist wires together, which is a nothing less than moronic!
Además que se recalienta el cable si hacemos nudos, eso no vale para nada y es hasta peligroso.
@@johannessporer ⁸⁸
Right. Excellent. Useful work
excellent video, the music too, the shots from Brasil are much inferior to this one, congratulations.🇧🇷
In Germany you would go straight in to the prison.
You would in New Zealand too.
Mit anschließender Knastkeile...!
😂🤕🤕
Just very curious for why end up in prison?
@@nightill5897 you can kill people with this Plug so it is normal.
@@FabianGros
Trotzdem trage ich mein Leatherman täglich als EDC am Mann...
This connection method is wrong, because the wire entanglement will increase this degree and easily catch fire.
First method ?..
Надо было сантиметров 30 зачистить, никак не меньше.
а лучше все полметра.
Nice information hafeez Bhai
I from somlia 🇸🇴🇸🇴🇸🇴🇸🇴 I like this chanel
Werewolf hands!!...with a funky beat, imagine these paws on your dentist!!.....Silky smooth!!
After sufficient time or with an instantaneous force, the wire will definitely short.
Hi bro #azelectricschool
Nice idea! Can sell more cable! Extra benefit of pull-safe..
Don't bend the stripped copper back on itself and don't coil the cables around each other, straight in with a good connection is all you need to do
Ya
2 nd method havemore wire
Так скручивать провода наооборот нельзя!!! Электромагнитное поле сожгет изоляцию и провода во время напряжения в сети!!!!
Самое страшное, что, нынешняя молодежь посмотрит видео это и так же сделает,а потом дома горят
Do you have the rest of the video when the 🔥 comes out the other side? I wouldn’t let you run an extension cord for me.
Waah, maza agaya
Ok, now try it with a 32A Cetac industrial plug.
V nice 🍁👌🏻
👌 very good idea 🔧
*Eee qoyil gap yòq🤝*
Thank you very much.
Такую вилку ещё постараться найти надо.
زبردست
میں اس وڈیو کے میوزک کے بغیر لائیک کرتا ھوں
Este vídeo es erróneo. Primero, no se estira de los cables, se estira de la clavija. Y segundo los cables tienen un radio de curvatura que no se puede exceder, no se puede retorcer un cable como uno quiera. Por último hay clavijas mejores que incorporan una retención para el cable. Por favor aportar ideas buenas, no chapucillas varias.
Best method to put fire...
Nice Information.
Tarika achha hai parantu short-circuit hone ke chance badhenge iss tarah se.
Thank you only vdo good😊
If the electrical resistance is too high, it will overheat and burn.
thanks ustad sahb
*HEY, WHAT STORY IS THIS? THOSE TWO SINGLE WIRES ARE OUTLAW, THE TWO WIRES MUST BE TOGETHER IN AN ONLY SHEATED CABLE, COMPOSED, IN FACT, OF THE SINGLE SHEATED WIRES, PLUS AN EXTERNAL SHEAT.*
И на сварку подключить))))
Which company did you take plug pin and how much cost of it
Nice
good job bh
People: Oh!
Engineer: where is fucking grounding!
Amazing 👍
J'aime ça
Good job
Excelente buenísima idea !!!!! Gracias por compartirlo saludos desde Argentina 🇦🇷🇦🇷
Who in the world will use PVC cables meant for fixed installation to be used for external devices. Definitely the use of flexible cable with extra sheath for protection is recommended.
Nunca debes amarrar un cable por el cuál va pasar energía eléctrica de ese modo
Doesn’t coiling a single phase cause unnecessary heating issue?
No heating issue. There will be a small inductive reactance which might reduce current very slightly but won't dissipate heat. In fact coiling a wire will reduce the heat it produces (compared to that same length of wire straight) by reducing the current flowing through it.
Depending on where you are there may be code issues with "knotting" the wire (if this is knotting). In Australia the wires in an approved plug must employ a "pillar, post grip, torturous path or other effective means" to prevent their withdrawal from the plug. I believe this is to avoid damaging the insulation or wire in case of tension being exerted on the cable/plug.
Sir amazing
Автор ролика наверное никогда не слышал об эндуктивном поле.
Да и я про такое не слышал. Вот про Индукцию были упоминания.
Good ma b electronics repairing ka related videos banata hu
Ok good
Very good
This one video made me to subscribe ur channel
Nice video
You helped me thanks 👍
Nice idea 😍
Excellent bro
NICE VIDEO DEAR
Thanks
Again nice
Good idea
The current flow in twisted wire will generate heat, right?
Kon si company ki h
good job
Superb
Не вижу ничего криминального, но интуиция подсказывает, что переплетенные друг с другом и сами с собой провода выглядят не очень красиво и надежно. Может быть, существуют условия, при которых такая формация приведет к не очень хорошим последствиям
Такая конструкция всего лишь приведет к пожару. А криминала нет, ага))
Thanks for sharing this video ❤️
Thanks for watching!
@@MehboobElectric ты полную дичь придумал, и за того что провода скрутил, замкнет. И может случиться пожар.
Без синей изоленты не канает.а если серьезно то используй кабель с двойной изоляцией и вилку с внутренним зажимом,а не это недоразумение.на крайняк стяжкой внутри зафиксировать.и что за прикол выдергивать вилку из розетки за провод. Ну у каждого "мастера" свои методы
If its a full cord with the sheath intacked the 2 cable sheath will not move but I suspect its just bits cable with no sheath wich will allow it to move
Super idea of yours. Kudos. 😉
Nice😀😀😀
Gracias por favorecer el sobrecalentamiento de los conductores y traer consigo un cortocircuito
Tou sem palavras, tenho de comprar é um anel de rubi!!!😁😆🤣😂😎
Thakns you sir for sharing vidio ,
Good👍
Con tus videos vas a causar muchos incendios breo, no necesitas ser eléctrico para saber qué produce más calor los cables juntos y pueden provocar un incendio
Great
Excellent procedure
Good sir
Такие позорные провода и вилки применять в бытовой сети крайне опасно!
ruclips.net/video/XFg3vE0Ebak/видео.html
I like it this video
blue and green.Which is it live-line?
Так в нормальных вилках есть свой нормальный зажим, и так нельзя делать из за сопротивления. Чертовы самоделкины.
Supar bro
Good
واااااو احسنت 👍👍👍👍
좋아요^^~~🇰🇷🇰🇷🇰🇷👍👍👍
Good...
요즘 저런 접지도 안달린 플러그를 누가
쓰누 ㅡㅡ;;
영상보고 따라하는 흑우 없길
요즘제품은 접지칸이 따로있어서
플러그속에 저런빈공간 없습니다
요즘 플러그에 고정블록있는데 저렇게 묶으면 상당히 곤란할듯 누적혹은 단락
شكرا جزيلا على التعليم
Twisted cable will generate heat because electromagnetic activity, i think use clamp cable is more safe rather than twisted it, use plug with clamp included.
Wrong lol
Super ❤❤❤❤
Isn't there some rule about crossing the current streams or something?
SIMPLESMENTE…., adorei, belíssima ideia!
Abraço aqui do Brasil 🇧🇷
Do not do it! You will burn your home!
Good Technic
Good bro