Thank god I’ve found this ! Not got a lot of space to spare for a gym at home so was looking for something that would allow me to do a lot of the exercises I do in the gym, at home, cos to commute to the gym locally that carries all these machines is at least a 40 minute commute in total and being able to do lots of the exercises I do but at home is class
Amazing gym! I cancelled my gym membership a few years ago. After transforming my garage into an amazing gym, NO REGRETS in purchasing the LeverGym and the accessories!
I have the older version and this fixes all the little gripes I had with that awesome machine. I can almost guarantee they bolted this to the ground though. The older version moved a lot on curls and tri extensions unless you had weight somewhere else on it. I'll be buying the new version this summer and I can't wait.
Plastic body had a small chip when ruclips.net/user/postUgkxUHHotQRjIQnfuxEeVotlkHVYWH0DXZoS I opened from box- would have sent back but it works well- using for warming up before exercising from full knee replacement- also use several times during day to keep movement easy. Sturdy, easy to use, easy to assemble (instructions didn’t match but easy to put together). Getting the same movement as the warm up bike at PT. Would suggest to order before surgery so you have it home ready to use when you can!!! Doesn’t take up a lot of space-not heavy so easy to move- not using for arms but I think it would work just as well
I have an older version of this unit. Can the pegs for the resistance bands be added to it by drilling the necessary holes. I see that the are sold seperately on your website
With a 1:1 cable setup, you will probably need to pick your movements…. A 2:1 is used on most functional trainers that aren’t dirt cheap, and any I’ve seen reviewed with a 1:1, the reviewer mentioned it as a huge con and restricted movements…. You should have as much travel in the cable as you have travel in the weight…. Probably a 3 to 4 ft rom
my question is - would that work for someone who's shorter ? I'm 5"2. Also I dont have a lot of space but hoping to make room in my garage for this. would this take a lot of spce?
What is the total height of this machine? I see on the site it says 90 inches but someone that reviewed it said it was 9 feet. Also, is it rated at 500 total or 500 each arm?
gonna have to get this, and the attachments if only the weight plates didnt cost as much as the unit to get the most out of it, is there a best combination of weight plates to get the most out of like all 25kgs or is it best to get a mixture, the bars can take what 226kg, how many plates can fit on it? do i have to get all 25kg plates to get the maximum if it came to that?
Personally I would get 4/25s - 2/20s - 2/15 - 2/10 - 2/5 - 2/2.5 - 2/1.25 That covers everything and allows for a pretty solid growth. Powertec doesn’t sell 25kg (which I use all the time on iso and cable equipment) 20s are fine for barbell due to the 20kg weight, but that’s about it. 😊
why is there no adjustment on the lift-curl attachment WB-LLA ? we all have different leg length so there should be some way to adjust else it is useless @29:17 if this guy was 1 inch shorter it would be resting on his heel (and to be honest it is resting to low as you can see - its on the heel of his shoe). You have been making these for over 25 years, surely you should known better after 2 months!
$1600 before taxes and whatnot. Before the great plague they were $1200. I have the older version and I'll be getting this this summer, worth every penny, especially if you work out alone with no spotter.
The squat on this thing so far is the worst. You really need another pin just for it. One pin to hold both lever arms together, one to have higher so you can get in position then take it out, then one to catch the weight if you fail.
Thank god I’ve found this ! Not got a lot of space to spare for a gym at home so was looking for something that would allow me to do a lot of the exercises I do in the gym, at home, cos to commute to the gym locally that carries all these machines is at least a 40 minute commute in total and being able to do lots of the exercises I do but at home is class
Amazing gym! I cancelled my gym membership a few years ago. After transforming my garage into an amazing gym, NO REGRETS in purchasing the LeverGym and the accessories!
And you can sit on the bench. Wow amazingly versatile. 50% of this you can do with just a strait bar.
Rubber flooring? Is more solid than a cement floor?
This kit is amazing. I've been looking at squat racks and other lever gyms, home gyms etc. This with the accessories is all I need. ❤
Its the greatest mashine , i had an older version and i love it. ;)
And videos are the coolest since years
I have the older version and this fixes all the little gripes I had with that awesome machine. I can almost guarantee they bolted this to the ground though. The older version moved a lot on curls and tri extensions unless you had weight somewhere else on it. I'll be buying the new version this summer and I can't wait.
Worth every penny....
I have it since december.. 👍✌️👌👌💪💪💪 love it.
Incredibly good and informative video. Made me switch plans and go for this awesome piece of equipment.
Where can I buy spare parts such as bearings for the lower row weight plate attachment
very impressive hardware guys, thanks for the video.
I just ordered this !
Plastic body had a small chip when ruclips.net/user/postUgkxUHHotQRjIQnfuxEeVotlkHVYWH0DXZoS I opened from box- would have sent back but it works well- using for warming up before exercising from full knee replacement- also use several times during day to keep movement easy. Sturdy, easy to use, easy to assemble (instructions didn’t match but easy to put together). Getting the same movement as the warm up bike at PT. Would suggest to order before surgery so you have it home ready to use when you can!!! Doesn’t take up a lot of space-not heavy so easy to move- not using for arms but I think it would work just as well
Hey. Cool videos. Where do you get the training plans for the Station for muscle building?
Great Video👍👍👍
Looks so amazing. I don't know if this sells in Canada but I would love to buy one.
Love Rob!
where can i get the foot rest attachment for doing seated rows?
I have an older version of this unit. Can the pegs for the resistance bands be added to it by drilling the necessary holes. I see that the are sold seperately on your website
Super very good
Wow.. sold me
Powertec lever, atx triplex or brute force raptor lever?
What about user height? Can a 6'2 person use this or will pully exercises bottom out. Thanks
With a 1:1 cable setup, you will probably need to pick your movements…. A 2:1 is used on most functional trainers that aren’t dirt cheap, and any I’ve seen reviewed with a 1:1, the reviewer mentioned it as a huge con and restricted movements…. You should have as much travel in the cable as you have travel in the weight…. Probably a 3 to 4 ft rom
can you do pull-ups on it ?
my question is - would that work for someone who's shorter ? I'm 5"2. Also I dont have a lot of space but hoping to make room in my garage for this. would this take a lot of spce?
This has a really small footprint, you could get this one probably into a bedroom.
Since some of those commenting here my question is how substantial is this product in the material that makes it up
I brought one of this for 800 USD at Facebook last week like brand new condition
What is the total height of this machine? I see on the site it says 90 inches but someone that reviewed it said it was 9 feet. Also, is it rated at 500 total or 500 each arm?
id guess and say its 500lbs both arms combined and another 300lbs on the cable pulley
gonna have to get this, and the attachments if only the weight plates didnt cost as much as the unit to get the most out of it, is there a best combination of weight plates to get the most out of like all 25kgs or is it best to get a mixture, the bars can take what 226kg, how many plates can fit on it? do i have to get all 25kg plates to get the maximum if it came to that?
Personally I would get 4/25s - 2/20s - 2/15 - 2/10 - 2/5 - 2/2.5 - 2/1.25
That covers everything and allows for a pretty solid growth.
Powertec doesn’t sell 25kg (which I use all the time on iso and cable equipment)
20s are fine for barbell due to the 20kg weight, but that’s about it. 😊
구입을 어디서 하는건가요?
Can take Standard plates??? SOLD!
I need to buy
why is there no adjustment on the lift-curl attachment WB-LLA ? we all have different leg length so there should be some way to adjust else it is useless @29:17 if this guy was 1 inch shorter it would be resting on his heel (and to be honest it is resting to low as you can see - its on the heel of his shoe). You have been making these for over 25 years, surely you should known better after 2 months!
Do you have a catalog that you can send me
I want one pls
Which price
What is the price Sir ?
$1600 before taxes and whatnot. Before the great plague they were $1200. I have the older version and I'll be getting this this summer, worth every penny, especially if you work out alone with no spotter.
@@ninji522 🤝
A shame you don’t sell these in Australia anymore. Sam’s fitness only stocks your competition ATX
What, are you serious? Man, I use to get a kick out of those Lee Priest videos with the Powertec at Sam's. All his shenanigans, too. 😁
Spettacolare , quanto costa ?
1360€
@@playbeyond2388 grazie , compresa la spedizione ?
@@playbeyond2388ora costa 1700€ sul sito!
This or a functional trainer?
Mmmmm
And it's only 10k to make one of these your very own! LOL
The squat on this thing so far is the worst. You really need another pin just for it. One pin to hold both lever arms together, one to have higher so you can get in position then take it out, then one to catch the weight if you fail.
Can you explain it further because I'm trying to purchase this machine solely because of the squat system?
@@jeandetti6250no worries he just saying he’s too lazy to use extra pins for squat
@@Weewootruck Thanks man !