Highly impressed, look at the safety equipment and professionalism of the workers. Great work, but have a look at the joke masquerading as tree removers in USA , they must have plenty of idiots happy to risk their lives for a dollar, The Bobcat operator was very efficient ,no waiting just get another log and straight into the machine.
Nano maszyny na sztućce ja widziałem.Z poważaniem rutka I cała załoga naparu.Tak jak muwiłem zły ato zły W sposób wybitny Kraków łamał dobrem największych mocarzy powtarzam znaczek pod powiekę to za mało.Z poważaniem łza.
Sounds like the chipper is struggling maybe because of the blades are not sharp enough at work we use a bandit we put new blades on it it sounds like it would would run better
Vermeer machines have an automatic in-feed system. Once the in-feed has a hold of the log, the machine automatically forces the log into the knives in manageable "bites" for the knives. The result is: feed, bog, feed, bog, feed, bog until the log is gone. All be design. Vermeer machines work awesome.
I understand you guys just turn the key and go but we have to fix this s*** and the blades are really important on a underpowered machine and I just turn off auto feed all together rayco can suck that log and I like to feed the machine my way
I just rented this thing's baby brother, the BC1000XL, which had a 74hp, 2.9L Deutz turbodiesel... It was an absolute beast and ate everything I gave it - a lot faster than I could feed it - to include some 12" logs. I had to buck them into lengths small enough to balance in my tractors loader, but I'd say the machine could eat 1 foot of 12" diameter log every 2 seconds. Very, very impressive. Vermeer is awesome stuff.
+nephilly87 what third world shit hole do you live in, here in New Zealand pine is the most common firewood burnt and we don't have chimney fires unless some useless clown is too lazy to clean his chimney.
I'm hearing you but pawn in Australia is not worth much money and we don't have the meals to support local arborist to Mill timber I am looking forward to someone to invest milling local timber
No Brasil e uma bosta a assistência só tem em uma cidade e ainda não Paçao informação de nada no Brasil não recomendo se der problema está fudido que tem a máquina. Pois assistência e uma porcaria.
About 2.5cm x 2.5cm x 1cm thick - until it's chewing up the last bit of log, when the in-feed roller is no longer forcing material into the knives. At that point, the chips get much longer and less uniformly cut.
The machine has an automatic feeder that forces the log into the knives, then stops while the knives chew it up - then automatically forces more log in.
I can't believe that Bobcat lifted such a big tree. That was a lot of tree to chip.
Hey old mate, keep your hands away from the feed table, bit different with horizontal rollers but the logs still move around and fast.
The little bobcat that could.
That guy standing there acting like he's doing something.
Nice little operation
Impressive chipper! Are the chips being utilized or not? Seems like a waist to just use the chips as a landfill compost. A lot of firewood there.
Highly impressed, look at the safety equipment and professionalism of the workers. Great work, but have a look at the joke masquerading as tree removers in USA , they must have plenty of idiots happy to risk their lives for a dollar, The Bobcat operator was very efficient ,no waiting just get another log and straight into the machine.
that is bad ass chop chop!
you could slowed down the feeder speed a bit, seems like ur running it on max.
First time seeing a Bobcat working in Australia.
Should have got a bandit 😂😂😂😂🤣😁
Lol
Do you own a bandit? Are they better than a Vermeer
@@richardmercado6285 Bandits are Amazing can't go wrong
Just seen comparison between bandit & vermeer ,vermeer won , juts barely
Morbark or bandit 👍👍👍
as long as you're sitting at the top is all good
oh oh oh there goes the big one show the rollers!!!
Are the chippings going to be processed into boards, or are they gonna be dried out to be used as biofuel?
damn that thing ate that pretty quick that seems a little fast to me but im not 100% anyways cool video and thats one beast of a chipper fucking a
Just because you can does not mean you should. That chipper is huge, but that tree should have been bucked up and used for fire 🪵 wood!!!
Maybe for an outdoor fire.....you don't want to put pine in a fireplace.
Buen equipo
Nano maszyny na sztućce ja widziałem.Z poważaniem rutka I cała załoga naparu.Tak jak muwiłem zły ato zły W sposób wybitny Kraków łamał dobrem największych mocarzy powtarzam znaczek pod powiekę to za mało.Z poważaniem łza.
Sounds like the chipper is struggling maybe because of the blades are not sharp enough at work we use a bandit we put new blades on it it sounds like it would would run better
The way the Vermeer works is using a smart in feed which controls the ramps at hydraulics to Optimate chipping and quality of chips
Vermeer machines have an automatic in-feed system. Once the in-feed has a hold of the log, the machine automatically forces the log into the knives in manageable "bites" for the knives. The result is: feed, bog, feed, bog, feed, bog until the log is gone. All be design. Vermeer machines work awesome.
Yeah that chipper doesn't compare to the Raco the customers are always really scared when we fire it up and feed it large 20 inch logs
I understand you guys just turn the key and go but we have to fix this s*** and the blades are really important on a underpowered machine and I just turn off auto feed all together rayco can suck that log and I like to feed the machine my way
Epic
Six out of ten mafia bosses prefer the BC2 to get rid of all of life's little problems.
The trick is using it past its possibilities if I picked up that log the normal way the bobcat couldn't lift it
Started looking up 6 inch chippers and ended up here.
Lol
Buenas noches disculpe endonde puedo conseguir. Y cuanto es el precio? Alguien que me ayude con la pregunta gracias
ÓW.
Stupid. But is it lees polution or fuel than a few chainsaws and 2 guys?
ProTrees I think I'd rather have this than a few chainsaws and guys lol, how can you even compare?
that poor bobcat
maybe if you had an outdoor burner.
a vagaina has no limits
how did i get here....
wrong path in life
Why not cut them up for firewood , just seems a waste .
Turbo diesel ? i can hear the turbo spool when it bogs down
I just rented this thing's baby brother, the BC1000XL, which had a 74hp, 2.9L Deutz turbodiesel... It was an absolute beast and ate everything I gave it - a lot faster than I could feed it - to include some 12" logs. I had to buck them into lengths small enough to balance in my tractors loader, but I'd say the machine could eat 1 foot of 12" diameter log every 2 seconds. Very, very impressive. Vermeer is awesome stuff.
No muffs 4 the operator?
That's nuts. I rented this things little brother (BC1000XL) this weekend, and earpro was 100% required.
what a waste, saw the bloody thing up for firewood!! that machine is designed to stop at intervals so it doesnt bog down and stall
Pine firewood? Maybe if you like your chimney on fire
+nephilly87 what third world shit hole do you live in, here in New Zealand pine is the most common firewood burnt and we don't have chimney fires unless some useless clown is too lazy to clean his chimney.
You just chipped up a few hundred dollars in 2x4's .
I'm hearing you but pawn in Australia is not worth much money and we don't have the meals to support local arborist to Mill timber I am looking forward to someone to invest milling local timber
Necrsito una chipper para picar solamente rama delgada que modelo o serie me recomlendan ustedes
Heber Garcia 1000xl compa
What a waste of potential lumber!!!
The price they would get for the lumber would probably be less than the amount it would cost to transport and process it.
Phil.Paula Stocks what about biomass heating
Nah, there's lots of great uses for the woodchips. They turn into rich soil after a year or two when spread out. They're great.
Im having dinner mmmmmmmm
should have bought a rayco 20xp would not have needed 3 min of video to show a little log go threw lol
No Brasil e uma bosta a assistência só tem em uma cidade e ainda não Paçao informação de nada no Brasil não recomendo se der problema está fudido que tem a máquina. Pois assistência e uma porcaria.
What is the average size/dimesions of the chips?
About 2.5cm x 2.5cm x 1cm thick - until it's chewing up the last bit of log, when the in-feed roller is no longer forcing material into the knives. At that point, the chips get much longer and less uniformly cut.
But is prize this machine
That thing has intergestion
Absolutely terrible why would you force the machines like that.They are high power but shouldn't be misused.
The machine has an automatic feeder that forces the log into the knives, then stops while the knives chew it up - then automatically forces more log in.
How much?
I gotta say that sounds terrible for the engine
Waste of good lumber.
WASTE CAPITALISTE!!!