Ha, i just got one of these delivered yesterday and was baffled by it, didn't realise how it worked 😅 so thanks for the vid, will save me a load of time and Embarrassment on the bank 😂😂
Its nice piece of kit but u need to have that thing in your mind to judge distances. If u clip up to short or to long you out of 🎯. Im beginnner to carp fishing and its hard to cast accurately, but I still think its a good piece of equipment. Well designed
Given 2 ov these the first one s and one the steel shaft sheer d off on the cast when it hit the clip they don't seam very robust on the centre steel section . Notice how he's only fishing short as well . More stretch at long range , more problems to get it to open , would defiantly use braid as a mainline , forget using mono waste of time . Lazy git , I would of just baited up by hand lol .
we got loads taken from our lakes here in wales the local angling club has over 30 bailiffs and they still cant stop them they a plaque on the fishing society they don't realise a 20 lb carp is over 1000£ to buy and we keep telling them DONT TAKE THE &(&^%&^%& FISH and they don't listen and if they do get caught they get a slap on the wrist if they don't like our rules FCK off back to your own country and leave our fish alone !!!
You know when you suddenly discover something that is going totally change the way you fish a spot that’s been giving you problems….over the moon to discover this
Finally cracked it for these to work I’m using a 10 lb test curve sea rod and 2 hundred pound braid straight through in order to get it to open 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Its made from cheap plastic. Theres a video by carpking71 using it. Five casts and the plastic broke sending the body flying off. He reeled in the metal pin!
The plastic is not cheap, and does not break. A small percentage of the first batch had an incorrect wire firing pin fitted by the manufacturer (they didn't tell us) when we found out we sorted it. carpking71's was the first one that broke, he was very unlucky. He had actually been using it successfully the day before. He has been sorted out with a new one since. We have had 25 confirmed breakages out of 5000 sold so far, but there might be some more out there (approx 70 units in total) If it does or has happened to you, simply send us the metal pin and you will get a brand new one, along with a complimentary gift. Email us for more info customerservice@totalfishinggear.co.uk
I like the idea of it , but I can see anglers spraying patches of bait all over the place , thats the only downfall I can see . But the idea of getting that baiting presentation I like , it will just be lits of practice to get the hang of it I can imagine . Alot of people slag off TF GEAR , but if its good enough for Mr dave lane then its defo good enough for me . Ive heard people saying only noddys use there stuff , really so dave lanes a noddy now is he ?? Lol
Its made from cheap plastic. Theres a video by carpking71 using it. Five casts and the plastic broke sending the body flying off. He reeled in the metal pin!
Gary Cross on a forum tfg stated that they had problems with an early production run, and if you have this fault they are replacing free of charge and I believe they were giving out a voucher of gift aswell! Fair play I say.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Ha, i just got one of these delivered yesterday and was baffled by it, didn't realise how it worked 😅 so thanks for the vid, will save me a load of time and Embarrassment on the bank 😂😂
Hi, Good one. I saw guys used to make the same one which open in the air.
oooh the corner of newton park!!! no one ever wants the corner swim!! but now you have baited it up.....
Just got one joe brilliant bit of kit love it 👍
Its nice piece of kit but u need to have that thing in your mind to judge distances. If u clip up to short or to long you out of 🎯. Im beginnner to carp fishing and its hard to cast accurately, but I still think its a good piece of equipment. Well designed
Given 2 ov these the first one s and one the steel shaft sheer d off on the cast when it hit the clip they don't seam very robust on the centre steel section . Notice how he's only fishing short as well . More stretch at long range , more problems to get it to open , would defiantly use braid as a mainline , forget using mono waste of time . Lazy git , I would of just baited up by hand lol .
No carp left. Poles have taken them home for their tea
we got loads taken from our lakes here in wales the local angling club has over 30 bailiffs and they still cant stop them they a plaque on the fishing society they don't realise a 20 lb carp is over 1000£ to buy and we keep telling them DONT TAKE THE &(&^%&^%& FISH and they don't listen and if they do get caught they get a slap on the wrist if they don't like our rules FCK off back to your own country and leave our fish alone !!!
Notice the edits of you throwing bait in margins an no bomb even landing 😂😂
You know when you suddenly discover something that is going totally change the way you fish a spot that’s been giving you problems….over the moon to discover this
I want one. Excellent idea. Who come up with it? Who ever it was should be mentioned. 👍
Mine cracked off at the clip on 50lb braid first proper chuck with bait in. Waiste of £14
Finally cracked it for these to work I’m using a 10 lb test curve sea rod and 2 hundred pound braid straight through in order to get it to open 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Its made from cheap plastic. Theres a video by carpking71 using it. Five casts and the plastic broke sending the body flying off. He reeled in the metal pin!
The plastic is not cheap, and does not break. A small percentage of the first batch had an incorrect wire firing pin fitted by the manufacturer (they didn't tell us) when we found out we sorted it. carpking71's was the first one that broke, he was very unlucky. He had actually been using it successfully the day before. He has been sorted out with a new one since. We have had 25 confirmed breakages out of 5000 sold so far, but there might be some more out there (approx 70 units in total) If it does or has happened to you, simply send us the metal pin and you will get a brand new one, along with a complimentary gift. Email us for more info customerservice@totalfishinggear.co.uk
I like the idea of it , but I can see anglers spraying patches of bait all over the place , thats the only downfall I can see .
But the idea of getting that baiting presentation I like , it will just be lits of practice to get the hang of it I can imagine . Alot of people slag off TF GEAR , but if its good enough for Mr dave lane then its defo good enough for me . Ive heard people saying only noddys use there stuff , really so dave lanes a noddy now is he ?? Lol
Not like the usual spod brigade then 🙄
Engineering 101. kiss
That reel sounds awsome I guess it's a Daiwa..
My team are working on a bait dispensing Drone! Now in the 5th month of development!!! Watch this space!
So complex I like the normal spomb better
Bag of cat poo, casts like a dead dog, the leaders to long and it may as well be made of toilet paper the build quality is that good.
Its made from cheap plastic. Theres a video by carpking71 using it. Five casts and the plastic broke sending the body flying off. He reeled in the metal pin!
Gary Cross on a forum tfg stated that they had problems with an early production run, and if you have this fault they are replacing free of charge and I believe they were giving out a voucher of gift aswell! Fair play I say.