i was wondering if something like this existed. i don't play airsoft but with ammo prices the way they are now days, i figured airsoft would be pretty good substitute for dry fire practice.
Hello, I have the same pistol with the same light, and I think the issue your having with fitment has to do with the latch you have installed, you might have the Universal one installed, which is meant for Glock type rails, the one that will mostly eliminate the wobble will be the one with the P, which is meant to work with picatinny rails.
If you manage to see this comment, the x300 replica is wobbling because of the mounting stick u see inside of it. usually ones included you can change, that one would probably be for a 1911, theres one that fits perfectly for glocks that would usually be included.
Adjust the tension screw on your safariland. It’s that big knob with the rubber washer sticking out the side. It will allow the two pieces of kydex to separate enough to give you clearance , but still let the ALS catch to engage.
This gun is next on my list. Closest you can get to a gucci glock in airsoft with all the major gucci glock parts being next to impossible to find while others are made fir vfc as it tm and we don't exist.
The elite force is probably better because of the aluminum slide vs pot metal. However between a we and a vfc for just a regular Glock I can't justify the price difference.
The frame imitates the p80 pf940c if anyone is looking for holsters. Like it was discussed, the frame isn't going to fit 99% of holsters for a stock glock. The trigger frame does not match up anywhere on its profile with a stock glock trigger frame as in, you can't simply add or remove material to get it within the same dimensions. You might be able to dremel and sand a holster but it would be a significant job. Just a heads up if you're eyeballing this and thinking it might be able to get stuffed into your existing holsters.
@@ExtraordinaireThe Sorry, I should've specified I was talking about the AW. I did shave down the frame a bit but it's still slightly out of dimension. I've tried a 6378 (no light), 6390, Trex Arms Sidecar, and hell, even a gun clip.
@@Theairsoftnerd I highly doubt it since the ragnarok is just tension fitted for a glock frame. This thing's trigger frame sticks outside of glock's dimensions. I ended up getting a WE glock 19 gen 5 from hong kong. I knew shipping would be a pain, even if the base prices were lower, but all said it ended up being just a little over $100 shipped lol. Not a big problem as long as you're ok with waiting ~3 weeks.
I have several real steel polymer 80s as well as real surefire x 300s and I always have to shim the quick release versions because they rattle So bad. The thumbscrew version is the one I prefer
I'm looking into this pistol cause I love my p80s too but when u pulled out that glock 17 I was like dang that thing looks like 9mm I that glock was nice and I just thought it was real cause the comparing of the p80 and the airsoft gun
Very interested in this product. How is it so far? Care to share your experience? I'm such a novice to these things but, I do have several ...... um..... P80 things... ;) and would like a practice option for them. Can I mount a regular red dot on these or is there a special one I need to have because of the weight of them? I'd like to practice with what I use on my carry pistol. Great video too by the way. Great information.
Do you know the thread dimensions of the barrel I just ordered it a few days ago and should be expecting it to show up any day now but want to get some muzzle devices
I couldn’t recommend WE I ordered a 17 a few months back and it came not working tried to fix it no hope bought a tm and have never had an issue with it
Thirstygrunt elite force pistols are usually pretty bad as far as long term reliability is concerned, especially since its nearly impossible to get replacement parts. If you want a G19 go for the WE Gen 3 or Gen 4 since they have a decent aftermarket, being mostly compatible with TM parts.
So if I bought the non optic version and put an optic ready slide on it, can you do that? or would you have to replace the nozzle and buy the optic mags?
Nice Review Buddy , glad you like our new product
Do you have a retailer in EU?
@@HiDragLowSpeed Yes we do , what country you in ? you can contact us directly via facebook.com/armorerworks/. Pm us directly there
@@ArmorerWorks so what sellers can i buy this gun from in the United states Evike doesnt sell them yet?
@@loganstoffel4007 Evike does sell these, it's where I bought it from.
Mine should be coming in around 3/4 weeks from crown airsoft i cant wait to get it
i was wondering if something like this existed. i don't play airsoft but with ammo prices the way they are now days, i figured airsoft would be pretty good substitute for dry fire practice.
Dry firing does absolutely 0 damage to your Glock
While dry firing an Airsoft gun breaks it
@@atf45 hes not going to dry fire the airsoft gun dummy
@@atf45 Looks like your firearm knowledge comes only from airsoft
@@atf45 dry firing airsoft gun won't break it unless it is some poor quality made
Hello, I have the same pistol with the same light, and I think the issue your having with fitment has to do with the latch you have installed, you might have the Universal one installed, which is meant for Glock type rails, the one that will mostly eliminate the wobble will be the one with the P, which is meant to work with picatinny rails.
If you manage to see this comment, the x300 replica is wobbling because of the mounting stick u see inside of it. usually ones included you can change, that one would probably be for a 1911, theres one that fits perfectly for glocks that would usually be included.
Adjust the tension screw on your safariland. It’s that big knob with the rubber washer sticking out the side. It will allow the two pieces of kydex to separate enough to give you clearance , but still let the ALS catch to engage.
That would work, but this is a replica which isn't made the same as my real Safariland.
This gun is next on my list. Closest you can get to a gucci glock in airsoft with all the major gucci glock parts being next to impossible to find while others are made fir vfc as it tm and we don't exist.
ur taclight is for glock mount only. thats why its wiggle. ur poli80 has the picitini rail
I’m sure it came with other pieces. Mines has a bar that slides in and out to lock the light to the rail
The elite force is probably better because of the aluminum slide vs pot metal. However between a we and a vfc for just a regular Glock I can't justify the price difference.
They sell the gas port separately so you can put them on your other glock type mags and they will work
The frame imitates the p80 pf940c if anyone is looking for holsters. Like it was discussed, the frame isn't going to fit 99% of holsters for a stock glock. The trigger frame does not match up anywhere on its profile with a stock glock trigger frame as in, you can't simply add or remove material to get it within the same dimensions. You might be able to dremel and sand a holster but it would be a significant job. Just a heads up if you're eyeballing this and thinking it might be able to get stuffed into your existing holsters.
My real PF940C(in this video) fits my Glock 19 Safariland just fine.
@@ExtraordinaireThe Sorry, I should've specified I was talking about the AW. I did shave down the frame a bit but it's still slightly out of dimension. I've tried a 6378 (no light), 6390, Trex Arms Sidecar, and hell, even a gun clip.
@@dogboy0912 do you know if it will fit the trex arms ragnarok?
@@Theairsoftnerd I highly doubt it since the ragnarok is just tension fitted for a glock frame. This thing's trigger frame sticks outside of glock's dimensions. I ended up getting a WE glock 19 gen 5 from hong kong. I knew shipping would be a pain, even if the base prices were lower, but all said it ended up being just a little over $100 shipped lol. Not a big problem as long as you're ok with waiting ~3 weeks.
Can you do a comparison of the frames stripped?
Im sayin bruh 😂 i already kno whatchu tryna do bruh 😈😂
Hi, nice video. Do you know exactly what size and type of threading is is the original outher barrel? Thank you.
@hiphopcroaks24 I don't think that the pistol outher barrel inside is -14 mm. Actually it is +11 mm ;)
do you have a link for the barrel?
friend if I put an extended glock magazine umarex elite force it works
I’d love to know where you get all the “replica” things you have? Like the holster and x300?
Also, will any G19 holster fit?
mine didnt come with a threaded barrel, or is the orange tip just covering it and you have to take it off? PLEASE HELP ME!!
Definitely a good looking 19 good looks man
@extraordinaire What model holster is that you're using for the VX9?
Takes real one to the airsoft field by accident 😳😭😭
What other mags would work we etc???
So it would be the same length as a Glock 19 ?
Yes
where did you get the holster from?
Its a safariland 6354 holster he got the replica one im guessing from a Chinese retailer or amazon/ebay
What kind of thread has the VX9, please? 14cw or 14ccw?
Yeah, as far as I understand, this pistol actually fits holsters designed for the glock 20/21.
I have several real steel polymer 80s as well as real surefire x 300s and I always have to shim the quick release versions because they rattle So bad. The thumbscrew version is the one I prefer
Is the black one an airsoft weapon?
I bouth one myself and they changed the gas port
Do they make one that’s all black with a basic slide?
Will glock slides work, if so what model? ,love this vid btw
What holster is that I need a link and a name
Can you put a link to that red dot in the comments
Is the vx9 compatible with glock parts?
Lol I was waiting for you to clear the real glock
Why ? It’s not on you if he fucks up The operator should know the condition of the weapon at all times
Subscribed 😎👍
Very helpful video. Thank you for the information. :)
Where did u get your new berole
Do you know of a good place to get we tech Glock upgrade parts online?
where you bought the magwell？
I'm looking into this pistol cause I love my p80s too but when u pulled out that glock 17 I was like dang that thing looks like 9mm I that glock was nice and I just thought it was real cause the comparing of the p80 and the airsoft gun
Very interested in this product. How is it so far? Care to share your experience?
I'm such a novice to these things but, I do have several ...... um..... P80 things... ;) and would like a practice option for them. Can I mount a regular red dot on these or is there a special one I need to have because of the weight of them? I'd like to practice with what I use on my carry pistol. Great video too by the way. Great information.
can you take the tip off?
How's it holding up
u said that u bought used WE glock 19,so i'd like to know where u found person who sold u this WE glock
App called HopUp
@@ExtraordinaireThe thanks!!
One oglf my dream Airsoft pistol...👌👌
how do i put my rmr on tho
What size is the thread size?
You have your light set incorrectly that’s why bud
What is the thread size? And any muzzle recommendations?
Do you know the thread dimensions of the barrel I just ordered it a few days ago and should be expecting it to show up any day now but want to get some muzzle devices
I have the non optics ready slide version where can I get a plate to replace the rear sight and allow me to use a micro red dot sight
Does my airsoft video have to much meme
Hey I got a question? Where do u get the barrel for the pistol at.?
Hey what do you have for the muzzle and what kind of holster do you have
You never did a follow up video of your real polymer80. Have you shot it? Did you have any issues with it?
What holster are you using for the vx9?
What would be better a WE G19 or a Elite force G19? take similar mags and both look good but how about reliability?
WE
I heard good things about the TM G19 but I just nabbed an EF/VFC G19 to not go through the trouble of waiting for already oos metal slides
I couldn’t recommend WE I ordered a 17 a few months back and it came not working tried to fix it no hope bought a tm and have never had an issue with it
Thirstygrunt elite force pistols are usually pretty bad as far as long term reliability is concerned, especially since its nearly impossible to get replacement parts. If you want a G19 go for the WE Gen 3 or Gen 4 since they have a decent aftermarket, being mostly compatible with TM parts.
@@dominicniro2928 interested in selling it?
How to get or build p80 compact with full auto select fire? Anybody help?
you a fed
Fed concerned with airsoft?
What holster do you use?
It's a TMC 63DO
@@mooairsoft5480 thank you so much.
Approx how long was shipping
From Evike, about a week.
Where did you get the replica x300
Does the vx9 have barrel threads and if so what size
Will this frame work for a real p80 build ? Only comment if you sure of you answer please
What holster is that?
Is it tm compatible?
WE compatible
Nobody give two shits about the box!!!!!!
Gun safety, not a thing, lol 😂 I don’t care if it’s real or fake, always treat a gun like it’s loaded, other then that, nice shit bro.
Its polymer !!!
Stippling.
So if I bought the non optic version and put an optic ready slide on it, can you do that? or would you have to replace the nozzle and buy the optic mags?
I believe the mags and nozzle are different.