[@YellowPurple]

*[SOLVED] ESP32CAM Error - Failed to connect to ESP32 Cam || Problems Uploading Code to ESP32 Camera*
ruclips.net/video/lqNRj4kQCcA/видео.html

[@kaushalparab4406]

Esp 32 cam TX pin is connected to Rx pin of arduino Uno?

[@tyche-sama]

Bro this background music makes this feel like a nature documentary

[@keithscott9774]

Thanks very much, this helped me. A lot of "silent" videos drive me nuts because they go too fast and they lack clarity. Yours was an excellent silent video, clear and easy to follow.

[@tingoyeh4903]

You are a lifesaver, the hero of the day. Thank you, sir.

[@alexeykhachatryan1214]

The single video which made my cam work. Thank you.

[@Professor1926]

So my set up is like the diagram, but in the video I am seeing more connections than are in the diagram. Am I missing something. I cannot see in the video what additional connections are being made. Can you please clarify?

[@makersfunduck]

Thanks for the video. very clear explanation.

[@gauravpisal43]

A fatal error occurred what can i do ?

[@aryanmanjarekar2784]

Perfect Video , Thankyou Very Much it Worked for me

[@roberch4728]

excelente tu video me ayudo muchisimo y pude configurar mi camara. muchas gracias, es la primera ves que veo tus videos ya tenes un seguidor más. Saludos

[@RoboTecs]

Thanks for sharing it!

[@_saga3898]

Hey, which software did you use to draw the diagram?

[@lowspecgamer101]

Thanks finally worked!

[@leonardorovina669]

what did you do to open the ESP32 camera without using an external source?

[@VladoSaurio]

you saved my life. Thank you so much!

[@YellowPurple]

You're welcome!

[@CalyGamer]

it works until I try to activate the face recognition feature, where it freezes until I reset it. How can I fix that?

[@Bianchi77]

Nice video, thanks for sharing it :)

[@mariotovar4762]

but tx on the arduino goes to rx on the camera? and viceversa?

[@kimchijeon2793]

Hello! Is there a solution as to why we're getting the failed to upload/connect to esp32 cam problem over and over? I've tried following your exact coding and exact connections and it still won't work. Please help me in my school project

[@eisaessam130]

remove grnd from reset on arduino

[@nurfatihah7065]

​@@eisaessam130 still the same

[@prometeuszanin9279]

@@nurfatihah7065 Try to change 115200 baud in serial monitor

[@nikhilyeware9036]

thnx for the tutorial...it helped me a lot.

[@gayathridevi9180]

While verifying the output in the serial monitor,
It's throwing an error called "camera init failed with error 0x105"
Can you please guide me to solve the error.

[@hematulasireddy]

I also have same issue. Did you cleared that??

[@OneOneNie]

when I uploaded, there is error: exec: "python": executable file not found in $PATH. but I have installed python3. don't know how to fix.😫

[@javier_zam]

Hello im new on IoT and wanna learn, thank your for Video btw. I want to ask can this project Making as Security camera that use speaker and mic also to home owner communicate by android app with guest outside home that talk into camera? and then can it acces by user that far from home because the wifi on video use home wifi.
i know thing about machine learning and cloud computing maybe it can use on this project?

[@GopalSankar-bb1cz]

I got the IP address and when I opened the IP in browser, it is not connecting to camera. please help to fix it.

[@samirmr6510]

it erreur : A fatal error occurred: Invalid head of packet (0x86): Possible serial noise or corruption.

[@hrishikeshbhaskar1907]

No core dump found message coming. Someone help me

[@dodgecris4838]

nice video, What program did you use to design the circuit?

[@jifra02]

how you turn the flash on???

[@daniyalrazakazmi7249]

All the time this errors comes up when I'm uploading the code
"A fatal error occurred: Failed to connect to ESP32: No serial data received" ?

[@AW-xj4un]

I got the same...
Update...a few hours later
Make sure you have a good USB cable. It works if you use a good cable, get all sorts of errors if the cable is not good enough to support video streaming.

[@AmirWaisblay]

If you connected the wires properly you need to press the reset button on the esp32 while the terminal saiys: connecting.......

[@ezatyaqilah7179]

It still not working. Do you have other solutions?

[@lovnishverma]

same problem i tried pressing reset button while connecting still same problem i think drivers are missing i tried installing CP210x drivers but it is saying installation failed can anyone help...

[@puneetjain5625]

Same error! any solution yet?
@@lovnishverma

[@ilyasrehmani2981]

I don't know why it tells me the error is in the Wi-Fi even though I wrote its name and password. Please answer for me

[@nafisfaisal5817]

Very nice and helpful video. May Allah bless you.

[@sakuramatou-lq5dx]

Why it's take to long to verify the WiFi

[@karnaveeramanikanta3040]

i connect the circuit but i failed while seeing the serial monitor step. it is showing the below error.
20:25:15.759 -> E (489) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)
20:25:15.759 -> Camera init failed with error 0x105
can you suggest me what can i do to get success.

[@Deranged_Ghoul]

same.Did you get any solution??

[@panjacek6165]

finally a way that worked!!!

[@extras6604]

After uploading the code, it shows that the text section exceeds available space in board. How to correct that? Please help

[@Unpoplr_opinions]

same

[@juanmanuelschilling3901]

You should select partition scheme "huge"

[@gokulvijay6329]

can i get the arduino ide code?

[@ngkean9743]

Can this capture picture?

[@dhackmt]

man we have the same password lovely coincedence
thanks for the video

[@user-oj9cz4yz7r]

please i want to explain for me how to connect the door lock with it and how open via the camera please answer me faster plasea my freind

[@acinadarika4745]

not working with my arduino and esp 32 cam

[@samuelgrabois5754]

one of the links doesnt work :C

[@enosrijju5403]

ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for download

[@rijwanjaelani5449]

Esptool not showing

[@aryanlashkari7954]

Sita Ram❤

[@Clodnymous]

Hi, I really appreciate your video, like the wifi password lol, but i have a question.
I never used Arduino or something like this but i am really curious, At least you show the esp32 cam only with the adapter, so Arduino Is useless after you inject the code?

[@vigneshbabu7027]

While uploading code a fatal error occurred: failed to connect to esp32: no serial data received

[@vigneshbabu7027]

Anyone knows solution for this issue

[@pushpalatakitchens]

Same issue bro you got the solution

[@Ishika_Saxena]

have u solved this issue?

[@pranavrangan6007]

very nice

[@YellowPurple]

Thanks

[@albertwu96]

❤👍

[@user-yi5vz2hp1f]

nice

[@YellowPurple]

Thanks

[@ShubhamKumar-pj6es]

Code upload hone bahut time le Raha hai reset botton press karne ke bad

[@rahulkerolli1415]

can u upload all files of this esp32 pls

[@zamsonscienceacademy417]

i am facing some errors

[@kayzzer-ks3mk]

YAPAMAYANLAR İÇİN ARDUNİOYU ÇIKARIP TAKMAYI DENEYİN BENDE YARADI

[@PRASHANT-cd2my]

WARNING
UR ESP32 CAM WILL GET OVERHEATED WITHING FEW SECONDS , DONOT CONNECT POWER WITJ ARDUINO TO LAPTOP DIRECTLY

[@parabellumtr1659]

m

[@reihanboo]

for those stuck at the pesky error 0x105, select the CAMERA_MODEL_AI_THINKER camera model in CameraWebServer.ino

[@lakshminarasimha3323]

E (544) esp_core_dump_flash: ⸮⸮~⸮core dump partition found!
19:32:57.294 -> E (544) esp_core_dump_flash: No core dump partition found!
19:32:57.294 ->
19:32:57.294 -> E (386) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)
19:32:57.294 -> Camera init failed with error 0x105
i am getting this error

[@MisakikagamineXP]

same here, I can't seem to fix this :(

[@proprogramming7203]

same with me!!!

[@MisakikagamineXP]

update: I have 2 modules, 1 seemed to work. So I am thinking, it might some internal connectivity issue? as mine was purchased at a low price.