"I was never doing it wrong, I just couldn't make a genuine prince Rupert drop". That actually means YOU WERE doing it wrong. Tf are you talking about ? If u can't make it, you did it wrong. And who cares? It's a tear drop piece of glass that shatters when broke.
Check the temperature you use to Melt the glas. If its approximately 50% hoter then needed for the glas to melt, the result that could be that it doesnt sheter. (sorry for bad grammer)
People still being like “ItS nOt ThE eNd Of ThE tAiL” when he literally shatters these ones. The issue you had like a few people were saying is that you weren’t getting it hot enough before it dropped, you have to twist the glass rod to stop it from dropping right away so it can get even hotter.
Just like with melting metals, I don’t think you’re using enough heat. It isn’t complicated at all to make a Rupert’s drop. It’s literally a molten glass droplet cooling off in water. All of them should shatter
He just completely refuses to snap the very end of the tail
got you to comment😂
Nice pfp
@@bloxfruitschildsupport you too
@@HasanShah-wv2ywbro replied to 2 different comments to say the same thing
In every vid like are you stupid?
He is baiting us into commenting about his placements lol
Bro he just baited u wait he baited me ugh
@@boogieboy9148 Master Baiter
@@kevinjohnson7300he baited me too can u bait me too 😏
Fr
@@kevinjohnson7300 oh fr
Why do you keep snapping the middle part of the drop?
Because he wants to live his life😂
So that you'll watch the next one and comment the same thing again
So he can farm views
it should still be able to break it’s still technically the tail
Because he wants to farm conteny
STOP SNAPPING SO CLOSE
It’s rather he is just clueless or he is doing it to piss us off 😂
I think you need to snip the tail further back
Every video in this series is literally a C4 energy advert disguised as ragebait and you’re all falling for it 😂
Or maybe you just never snip the tail on purpose for more engagement and to keep the series going
Ingenious! You revealed the master plan
Bro thinks he's Mark Rober with the background music
You never snapped the end of the tail you kept snapping the middle
"I was never doing it wrong, I just couldn't make a genuine prince Rupert drop". That actually means YOU WERE doing it wrong. Tf are you talking about ? If u can't make it, you did it wrong. And who cares? It's a tear drop piece of glass that shatters when broke.
@@PaladinZ8008The literal end of the video.
👺
Mad
bro is fuming (let’s make this man as mad as possible)
Bros got the mark Rober song
(Yes I know it's not his song)
BROO PLZ DO U KNOW THE NAME
You need a hotter flame to make a genuine prince Rupert’s drop
Guys. Snipping the end of the tail doesn't work. It just breaks off. I used to make them in AP chemistry.
The reason they melt the tail into a ball is to make them survive the shipping better. It reduces the chances of explosion during shipping.
This is mark rober’s signature music
I know 😂
I finally know what it is called
@@willowfishing1896WHAT IS CALLED WHATS THE NAMEEE
I consider that a win you made a invincable prince ruprince drop
prince rupert drops are really interesting
“I want to be different” ahh prince rupert drop
The legendary Mark rober music
“I wasn’t doing it wrong” ok buddy ok
The reason why you can’t make a genuine one is because you want Prince Rupert😂😂😂😂
Bro knows what hes doing at this point
That sniff at the end of the video was personal, yall better leave bro alone
I think if you put the little ball at the end it might work.
He was like I’m wasnt doing it wrong. I just suck at making them from doing it wrong smh 😂
Lets say the first 5 places are taken by collossal, attack, founding, warhammer, armored titans.
Meanwhile, female titan: am i a joke to u?
We thinking of mark robert whit this song 🗣️🗣️🗣️🗣️👂👂👂👂
Sounds like the sound that mark rober uses in every video
Prince Rupert’s drops are my fav autism content lmao I love how they are so obsessed with glass
MARK ROBER MUSIC HEARD!! RAHH 🔥🔧🔥🔧🔥🔥🔧🔥🔧🔧🔥🔧🔥🔥🔥🔥
That last sniff of sadness tho
He forgot a step, when it falls into the water and cools down, you get a blowtorch and melt the tail to have that little ball at the end of the tail.
Never heard someone say Iceland like that
iceland mentioned 🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸🇮🇸
Straight from Prince Rupert himself.
not the mark rober music 💀
Paying for melted glass is insane
Bro I swear I thought mark Robert was gonna help you cuz of the song 💀
Prince Rupert drop is my entire personality says the creator of this channel
I didn’t even watch the video I just searched the comments for someone who noticed the Mark Rober music
Make a shield out of Prince Rupert's drops that does not have a tail
Bro makes immortal drops
THE TIP THE END THE SKINNY PART YOU HORIZONTALLY CHALLENGED MAN
Maybe it’s the glass?
Deeeeeeeper water
Make a Rupert’s drop out of a Rupert’s drop
That’s the fucking MIDDLE
He doesn't read comments guys, QUIT TRIGGERING MY ANGER ISSUES
Make a prince Ruperts drop out of ice.
You need to snap IT at The very end
You werent doing it wrong… but you WERE in fact, doing it wrong..
Keeps making indestructible objects
You have to try shattered at the thin edge
Bro, just melt off the tip so you don't risk breaking the glass drop.
Check the temperature you use to Melt the glas. If its approximately 50% hoter then needed for the glas to melt, the result that could be that it doesnt sheter. (sorry for bad grammer)
getting flashbacks from my ap lit exam
Has anyone else noticed the mark Rober music?
You should sand the bigger round part of the drop and see if it cracks
"So turns out i was never doing it wrong, i just couldn't make a genuine Prince Rupert's Drop"
So you WERE doing something wrong!
The very tip of the tail dude
A really simple way to make glass glitter lol
People still being like “ItS nOt ThE eNd Of ThE tAiL” when he literally shatters these ones. The issue you had like a few people were saying is that you weren’t getting it hot enough before it dropped, you have to twist the glass rod to stop it from dropping right away so it can get even hotter.
You should try to keep the drop from falling as soon as it can. Twist the rod to keep the drop up then it should have the needed heat
Blud said I’ll become mark rober
I thought it was either achilles heel or achilles tear or something like that
When prince rupert drops become a problem... There is help.
mark rober ahh beat
That music sounds familiar.
You need to rotate the glass as it heats up
why don’t they just make bullet proof glass out of this thing if it just decintigrates bullets
It's just apart of his character guys, he's never gonna snap the end, no hate or anything, but it's never gonna happen
Someone made a prince Ruperts drop using sugar.
Make it with a lower temp torch
Music sounds familiar
All i hear is the mark rober music
The thing is you never know if it’s a genuine Prince Rupert’s drop unless you intentionally break it
Mark rober music 😂
This has to be rage bait💀
Mark Rober ahh music
U can make one with Hydrogen Peroxide
Can you melt Rupert's drop again and again to make it almost unbreakable?
If you want to make that, you have to melt the glass, not melt to make the tails
You gotta do the very
tip of it 😂
Every single one that you make has no bubbles
Your snipping it at the wrong part you do it at the very end of the tail
Just try to do it at the end on your drops
So you have a prince rupert drop that didn't shatter with a that's virtually indestructible.
Make a Rupert's drop and replace the water woth coke
Just like with melting metals, I don’t think you’re using enough heat. It isn’t complicated at all to make a Rupert’s drop. It’s literally a molten glass droplet cooling off in water. All of them should shatter
Why was he always cutting it so close to the indestructible part of the drop
DONT SNIP IT JUST SNAP IT
Actually he was doing it wrong he has to turn the tube but if you want to make a bigger one keep turning the tube
Bro you are not snapping it from the very end
That was a lot of money to spend just to break them, especially with ad revenue being almost non-existent.
The problem with them is that there's air inside he needs to stop using glass a tube the air trapped inside stops it from working
You would have to snip it at the END not at the middle
Bro is making op drops like u making a window?
Why not use a deeper container so that it completely solidifies before hitting the bottom
What would happen if u made armour out of the ends of the fake drops?