do you have a video on replacing the Waste Ink Absorption Pads on a Canon MG3600? I removed the felt pads from the right side of the printer -- rinsed them clean and dried them but I cannot figure out how the pads g back in Any help here?
In my g4000 the hydraulic stick ( left side ) that makes scanner portion move upwards becomes fixed when we open the cover . I have to apply large pressure then it moves downwards and closes and also make huge sound . How to solve this? Any help would be beneficial. Thanking you.
You need to check the scanner from the inside. There may be some damage or broken lock that causes the portion of the scanner to move upwards. If you don't have experience on doing this then bring your printer to the nearest service center to avoid any more damage from the scanner
Sir, same model ng sa iyo, problem ng sa akin nag-iistop yung papel sa gitna habang nag pi-print or xerox, tapos nakalagay sa screen na cover is open kahit hindi naman tapos may error na paper jam kahit wala namang bara? paano kaya i fix sir?
do you have a video on replacing the Waste Ink Absorption Pads on a Canon MG3600? I removed the felt pads from the right side of the printer -- rinsed them clean and dried them but I cannot figure out how the pads g back in Any help here?
Ang galing ❤❤❤😊
boss sna may video ka ng replacement glass ng scanner thanks po
Great Work
Thanks for the visit
Thanks for sharing this video
You're welcome!
Is it possible to remove and replace the Ink Absorber Pads on a Canon G4210 Printer? If they can be replaced, is there a video showing how to do that?
Tnx u sharing
Thank you for watching!
Sir pano po ang timing belt replacement the same printer
Tnq
You're welcome. Consider subscribing to our channel to get you updated :)
In my g4000 the hydraulic stick ( left side ) that makes scanner portion move upwards becomes fixed when we open the cover . I have to apply large pressure then it moves downwards and closes and also make huge sound . How to solve this? Any help would be beneficial. Thanking you.
You need to check the scanner from the inside. There may be some damage or broken lock that causes the portion of the scanner to move upwards. If you don't have experience on doing this then bring your printer to the nearest service center to avoid any more damage from the scanner
@@INKfinite Hi, I have the same problem, how did you solve it?
sir paturo dn po pano magpalit ng feeder s g4010
papano po pag palit ng logic board?
Can u make a video tutorial also on opening the adf scanner of g4010 if a paper is stuck on it
sir alin jan ang wire sensor? kc lagi cover is open yung printer namin. canon g4010
sir may resetter po ba kayo nito sir
ruclips.net/video/GPFPkm9YjU0/видео.html
Ung ganyang printer ko sir nagkaroon ng bara ung lalagyan ng printer, binaklas ko din , kaso noong binalik ko na error 9500 ang lumalabas
hi, sana po masagot plss. ung canon g4010 printer kopo kasi pag nag photocopy ako sa area na Legal size my lining na pag xerox na
Kuya pano pag may na jam na papel sa loob ng scanner??
Please help me canon g4411 error code 5012
Hi sir.. good day po.. patulong po sana ako.. need ko po kc palitan timing belt po ng G4010 ko.. baka po may video kau..
My new printer gives 9500 error even i reset its return to this error what will be the problem? I filled the ink and remove tapes as per instruction
Hi po what if nalagyan ng barya sa loob ng printer pumasok siya sa lalagyan ng bond paper paano po mabuksan sa loob po
HELP. I HAVE ERROR 1300 BUT NO PAPER IS JAMMED. THE PAPER IS NOT BEING PULLED IN
Sir Canon G4010 ayaw gumana ang ADF pag lagay ko ng document yung sa baba ang gumagana na scanner
Sir sakin po error B204 pinalitan ko na ng printhead ganun parin. Anu po kaya posible sira nun
paano po e repair if sira yung head catridge?
Cartridges are made to dispose. Kung depleted na there is no way you can fix it. Unless kung clog lang ang problem
@@INKfinite nilagyan ko na po ng bago.
Sir, same model ng sa iyo, problem ng sa akin nag-iistop yung papel sa gitna habang nag pi-print or xerox, tapos nakalagay sa screen na cover is open kahit hindi naman tapos may error na paper jam kahit wala namang bara? paano kaya i fix sir?
Possible baka sa switch hub sensor po ng logic board ang problem sir
Cell
Bka pwd pagawa sa inyo
not as expected
Then you have a different printer model
Please help me canon g4411 error code 5012
Hi po what if nalagyan ng barya sa loob ng printer pumasok siya sa lalagyan ng bond paper paano po mabuksan sa loob po
Please help me canon g4411 error code 5012
Hi po what if nalagyan ng barya sa loob ng printer pumasok siya sa lalagyan ng bond paper paano po mabuksan sa loob po
Please help me canon g4411 error code 5012
Hi po what if nalagyan ng barya sa loob ng printer pumasok siya sa lalagyan ng bond paper paano po mabuksan sa loob po