I like that kids are doing this to their trucks. It lets me know who to be nice to and have compassion for them. They walk around daily with acute rectal trauma due to their lifestyle choices.
@Coffey's Garage - Not sure if anyone has pointed this out but you're running 180watts worth of lights, at 12v that's 15amps. The switch you are using is only rated for 5amps. You put a 30 amp fuse on there... I'd highly suggest throwing in a relay so you don't burn out your switch, just a suggestion. I doubt it would be a fire issue since you have a fuse, but better to be safe than sorry and lose that nice truck.
I thought the same thing 😂😂so then how do you do it? I got 24 of em but drilling into my cab doesn't sit right with me. Can't find any other information
@@Jay-hp6pu not at all, it was nice to hit a switch and light up the night. Some people liked them some people hated them. But she’s someone else’s now. Sold it a while ago and bought a Raptor. ✌🏾
How did you go about connecting all the wires together into one? Did you use splice in's or T-Taps? Trying to figure out how to wire all 30 mine together
@@nightly5135 Yup, I did! I just t-tapped all the lights to my main wires (red & black of course) from the battery around my entire truck & then connected all that to a 3-pin rocker switch. Make sure you use the same gauge if you can! I ended using 12 gauge for some reason & the rock lights have like 24-26 gauge wire I swear lol, super small. Other wise like I did, it sucks getting the t-taps connected
@@alexandersupertramp7353 They're legal in most states! I asked my cop neighbor what the regs are and he said no red or blue and nothing flashing on road, must all be underneath the vehicle not flashing outward to blind other drivers....thats for most states....some states they are illegal but few....look up state laws to verify or hit the easy button and just ask a cop
How did u run the rear wheel well lights to the front ?? And also how did u wire it all to the switch if you could explain again I didn’t completely understand
@@jackpaullus2643 I was wondering before I put some on mine, was wondering how well they worked, it's not about tire size, what's your point? Kinda odd coming from a guy with a 2wheel drive? See it makes no sense
These look sweet! I really like the look of the bright white. I have a 2019 Ram as well, but it is black. I was wanting to go with RGB though so I could swap between red and white.
How did you wire the switch and do you have an inline fuse ? If you do how did you wire that Bc I’m putting 16 on mine and not sure how to wire them to a switch
I can’t get mine to work, keeps blowing fuses. All the lights turned on when I went straight to the battery and then didn’t work after I added the fuse. Any ideas what it could be
Hey man, I was looking into doing these lights and I saw you drilling into the cab next to the frame. Could you see the self tappers coming through the bottom of the cab if you pull up the carpet?
Thank you brother I appreciate it! Doing my wife’s Jeep and they’re similar lights without the wiring and stuff and I just want to make sure I do it right! The truck looks great with the lights as well great work!
What gauge positive/negative wire did you use? I used 18 gauge to extend the positive/negative wires from the module to my battery and the positive wire burnt down after a long drive right after installing them could this have been because I should’ve used 16 gauge or 14 gauge or because of heat somewhere under the truck or in the engine bay? They were connected straight to my battery but only the positive burnt down the negative wire was fine and was also 18 gauge and ran right along with the positive. Any suggestions?
mperez564 I used 18 gauge as well. I don’t think your problem was wire size. I don’t have a module with mine so it sounds like you have a different setup or rgb lights. Maybe try an inline fuse?
Coffey's Garage i have rgb lights it’s 4 pods with a Bluetooth module but the positive and negative cable coming from the module was way too short so I had to run 18 gauge positive and negative wire to the battery but only the positive burnt down after driving it right after install. I didn’t use a fuse but I feel like the fuse would just blow if I used 18 gauge again?
Coffey's Garage yes that’s what I was thinking because At first I thought you were going into the frame but then I saw you going into the floor panel and I was like oh god I hope he don’t live in Florida or in a salty place or up north cause that could be a problem in the future for you or someone else if you trade it in 😂
Busting Knuckles I do live in the north but truck doesn’t get driven in salt but also it’s such a tiny hole and blocked by the rock right and screw so shouldn’t be an issue
rocklow-x led rock lights has some for $312 and its only 16 but there bluetooth and you can chnage the color options sound worth it or no? Looking into getting some
Ismael Dominguez that’s not to bad because they’re Bluetooth and you can change them! I didn’t go that route because the white isn’t that bright on multi color leds and that’s all that I want to run. But if you want to run different colors that’s not a bad deal
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I like that kids are doing this to their trucks. It lets me know who to be nice to and have compassion for them. They walk around daily with acute rectal trauma due to their lifestyle choices.
@Coffey's Garage - Not sure if anyone has pointed this out but you're running 180watts worth of lights, at 12v that's 15amps. The switch you are using is only rated for 5amps. You put a 30 amp fuse on there... I'd highly suggest throwing in a relay so you don't burn out your switch, just a suggestion. I doubt it would be a fire issue since you have a fuse, but better to be safe than sorry and lose that nice truck.
Probably a “no-no” but what I do sometimes is just put the switch on the negative wire. Fused positive. Never had any problems.
“The right way” proceeds to drill into his cab
I thought the same thing 😂😂so then how do you do it? I got 24 of em but drilling into my cab doesn't sit right with me. Can't find any other information
So glad someone said it.🤣
Drilling into your cab is perfectly fine if you seal around the hole. Holes can be fixed. Working at a professional body shop will teach you that.
Drilling into your cab is perfectly fine if you seal around the hole. Holes can be fixed. Working at a professional body shop will teach you that.
lmaoo 😂😂😂
Thanks for the video! Just installed 24 rocks lights on my truck and followed your guidance. They look awesome
Rickey Bynum you’re welcome!! Glad to hear my video helped I’m sure they look amazing!!
24? Good god.
@@ryanhuff3353 right lmao
That’s a little excessive, don’t you think? You starved for attention or something?
@@Jay-hp6pu not at all, it was nice to hit a switch and light up the night. Some people liked them some people hated them. But she’s someone else’s now. Sold it a while ago and bought a Raptor. ✌🏾
The new body rams with the new LED lighting are the best looking trucks at night in my opinion
Agreed!
I went with 1.5 inch self tapper with a 10mm head there bigger then needed but hold securly
Great Job! Looks awesome my friend.
Drewski thank you!!!
Love the Camo on your truck😌🤟🏽 Saw ur truck today just now and me and my Dad loved it
Thank you! What Camo tho?
how did you connect all the wires to one. A distribution block? Or did you just run them all
chris lou ran them all together
Bro you gotta keep uploading man. This channel has a ton of potential
Thanks man! I know I’ve been slacking hahaha thanks for the motivation
Agreee !!!
@@that5.0tho74 thanks!!! I need to keep going been crazy busy lol
@@YamRida468 i feel you man !!! 😂 but no worries we will wait !!! 💯
@@that5.0tho74 appreciate you!
Should take the self trappers out and dab a bit of paint and put them back in so you don't get rust down the road
Clean looking truck next should be the cab light and the mirror lights to clear to match the rest 🔥🔥
Never going off road, big black void in the center, thanks transmission - will look great cruising the mall on daddys credit.
😂😂😂😂😂
haterrrrrrrr 😂
How did you go about connecting all the wires together into one? Did you use splice in's or T-Taps? Trying to figure out how to wire all 30 mine together
did you figure it out? i’m having the same question
@@nightly5135 Yup, I did! I just t-tapped all the lights to my main wires (red & black of course) from the battery around my entire truck & then connected all that to a 3-pin rocker switch. Make sure you use the same gauge if you can! I ended using 12 gauge for some reason & the rock lights have like 24-26 gauge wire I swear lol, super small. Other wise like I did, it sucks getting the t-taps connected
Very nice. That's tough. Standing ovation for the end result
Did you end up running a wire to your dash to turn them on and off whenever you like? Or do they just stay running when truck is on?
Would you recommend rock lights on a 2003 maxima ??
Or are they only recommended for taller trucks with all that extra space ?
Seems epic and necessary for off road use. On road, however, would make the truck scream ex-con.
😂😂🤷🏼♂️
Pretty sure they're illegal "on" road. Besides, why would you want to look like a douchebag driving with them on
@@alexandersupertramp7353 They're legal in most states! I asked my cop neighbor what the regs are and he said no red or blue and nothing flashing on road, must all be underneath the vehicle not flashing outward to blind other drivers....thats for most states....some states they are illegal but few....look up state laws to verify or hit the easy button and just ask a cop
Just installed 20 rock lights on the Suburban on my channel! 👍🏻
Do you have to drill it in or can you use double sided tape too? Mine’s a lease.
There’s no wire harness kit for the rock lights? I see only the fuse to the switch then to the lights. Correct?
Chilling with Dav-it no wire harness. Lights to fuse to switch to power
what did you use to connect it to your battery? and what amp fuse?
Correct me if I’m wrong but you connect all the rock lights together then to the switch and then the battery?
And a fuse
I’m wanna wire them up tomorrow so I’m just making sure I don’t get anything wrong lol
How did u run the rear wheel well lights to the front ?? And also how did u wire it all to the switch if you could explain again I didn’t completely understand
Running wire all the way up and splicing them together
I'm looking into getting these for my ram 1500. How are they holding up on your truck and how often do you use them
I’d also like to know
Holding up great and use them at least 4-5 times a week at night
How well do rock lights work on the trail? Like after going through mud and snow? Can't wait to see you use the rock lights off-road.
That’s a lot of talk coming from a guy with 31 inch tires
@@jackpaullus2643 I was wondering before I put some on mine, was wondering how well they worked, it's not about tire size, what's your point? Kinda odd coming from a guy with a 2wheel drive? See it makes no sense
That's what rock lights were originally made for lol, was for off-roading
What lift and wheel setup do you have on this video it looks really clean!
Thanks! 2.5” lift on 22x14s and 33x12.50
Hey man nice truck it lookks great! You think you can send a link of where your harnes and everything
There isn’t a harness
Where did you pick up the halo on/off switch at?
Where or how did you run your power and negative wires from the rear and the side lights?
These look sweet! I really like the look of the bright white. I have a 2019 Ram as well, but it is black. I was wanting to go with RGB though so I could swap between red and white.
Looks sick af I’m going to buy some for my 3rd gen
MXNATION99 thanks man! Definitely will turn out sweet!
How did you wire the switch and do you have an inline fuse ? If you do how did you wire that Bc I’m putting 16 on mine and not sure how to wire them to a switch
Yeah I used a fuse and wire from the switch the diagram will be on the whatever switch you use
Did you use a relay
Fuse
How did you connect your wires to the switch? Did you solder them? I can find any small connectors for the switch, I ordered the same one you got
That looks great; especially for a white truck.
Thanks!
So y’all put 3 in each wheel well and where did y’all put the other ones at?
Bobby Martinez 2 on each side and 2 under each bumper
Coffey's Garage okay I see what u did there enjoyed the video man just ordered the kit for my truck😎
Bobby Martinez thank you! And sweet good luck with the install you’ll be happy with it
what is your tint set up, looks amazing! would like to do the same to my 5th gen
Hayden Green thank you! 5% side windows and back window then 20% on windshield
@@YamRida468 thanks so much for the response! will get my tint on asap now!
Hayden Green no problem at all!! It will look awesome
Great video! What number fuse are you running ? 15 20 25??
I wanna say it’s a 25 or 30
What kinda of fuse holder did you get and can you share the link?
Man thats one clean Ram🤩
The Urban Artist thank you!!
It better be clean. Its brand new
So I had rocklights installed on my truck already and want add more. How would I do it
Add more and connect the wires to the existing ones by splicing them in
I love the truck man, I just ordered 22 auroras for my ram 3500 but my question is, how much wire should I buy of each color so I’ll have enough?
I can’t get mine to work, keeps blowing fuses. All the lights turned on when I went straight to the battery and then didn’t work after I added the fuse. Any ideas what it could be
Bigger fuse?
Did you have to get extensions for these lights!
Separate wire
Really turned out awesome by any chance do you remember the size wires you used to run the lights
Thanks and 18 gauge
Are you grounding each light separately ? I’m wiring in my rock lights as wel and don’t know how I wanna ground all of them especially the rears
no he's running each light to one wire then to the negative side of the battery
@@evan24v71 that seems a bit much but I figured mine out I grounded them all separately
Is the black wire a ground or does it go to the negative terminal?
Mike ground to the negative terminal
Looks awesome , where did you get that switch for the on off
Thanks and Amazon
How are the rock lights doing after these years? Are they still working?
just bought mine I can not wait!
I’m getting the jimjoy 18 rgb rock light kit off amazone for my 2nd gen
when you going to drywall garage?
Actually gonna just spray foam it now I’ll do a video when I do it!
How is every one splicing the wires off the lights onto the main lead wires? Used t taps but i think theyll hold moisture and mine already arched out
Could you let me know what the tire/wheel sizes are 22x12 or 24x12? And what tire size
mart06300 22x14 and 33x12.50x22
How are they holding up? Im looking into getting the same kit as you nuy want to make sure they actually hold up. Thanks!
Holding up great no issues and still bright
Where’d you order all of your wiring stuff from?
What gauge wire did you use how are the now if you still have the truck
Will the ones on the middle of the body (drilled into floor) not poke through in the cab?
Bro, such a clean ass job!!! I plan on doing the same. WHAT SIZE FUSE DID YOU GO WITH?
Ryan Molique I believe it’s a 30 amp and thanks man I appreciate that!!
Do 12 of them come in 1 package or if I want 12 I order QTY:12?
They got different packages, 8 , 12, 20 etc
I put 4 white ones on my atv. $32 for 4 pods. 370 lumen 3cree chip led.
Are those stock headlights..they are pretty bright..
Where did you get that flim on your windows divider?
Hey man, I was looking into doing these lights and I saw you drilling into the cab next to the frame. Could you see the self tappers coming through the bottom of the cab if you pull up the carpet?
Idk I haven’t checked hahah
I’m assuming they were ran straight to the battery with a fuse followed by a switch out to the lights?
Also what size fuse did you attach to this setup?
shane elmore yes you are correct! And it’s a 30amp
Thank you brother I appreciate it! Doing my wife’s Jeep and they’re similar lights without the wiring and stuff and I just want to make sure I do it right! The truck looks great with the lights as well great work!
shane elmore anytime man! I appreciate that! Good luck with the install too I’m sure it will look great
The ram logo needs to light up now to complete it
That would be sweet!
What gauge wire are the rock lights???
What gauge wire did you run from the rocks to under the hood
16-18
I can’t find a fuse holder with 18 gauge wire to match the rest of the wire. Do you have a link I could find it? Thanks
omg same...did you find one???
Where are u located I just got some no one here in LA, do unless I'm not looking correctly..
Pros to mounting to cab instead of frame?
Did you install a relay or went directly to the battery ?
Fuse
How do you add the rubber mounts i can't seem to figure out how they fit on the light due to the wire on on the end
Did you use a fuse box ?
Crewed them in the floor pan!?
What gauge positive/negative wire did you use? I used 18 gauge to extend the positive/negative wires from the module to my battery and the positive wire burnt down after a long drive right after installing them could this have been because I should’ve used 16 gauge or 14 gauge or because of heat somewhere under the truck or in the engine bay? They were connected straight to my battery but only the positive burnt down the negative wire was fine and was also 18 gauge and ran right along with the positive. Any suggestions?
mperez564 I used 18 gauge as well. I don’t think your problem was wire size. I don’t have a module with mine so it sounds like you have a different setup or rgb lights. Maybe try an inline fuse?
Coffey's Garage i have rgb lights it’s 4 pods with a Bluetooth module but the positive and negative cable coming from the module was way too short so I had to run 18 gauge positive and negative wire to the battery but only the positive burnt down after driving it right after install. I didn’t use a fuse but I feel like the fuse would just blow if I used 18 gauge again?
mperez564 I would ask the manufacturer of the product sounds like there’s something else going on. Not the wire
Want to do this to my white 2020 limited but don’t look forward for the install
It’s worth it!
How they tinted those tail lights ?
What type of red and black wiring did you use?
Omar Valdez 18 gauge
So the screw didn’t go through the floor into the cab of your truck ?
Busting Knuckles yes it did a little
Ok I just needed to know that because I’m about to do that same set up on my truck cause that just looked sick man!
Busting Knuckles no worries and thanks! Little scary drilling thru the floor but make sure there not that long of screws
Coffey's Garage yes that’s what I was thinking because At first I thought you were going into the frame but then I saw you going into the floor panel and I was like oh god I hope he don’t live in Florida or in a salty place or up north cause that could be a problem in the future for you or someone else if you trade it in 😂
Busting Knuckles I do live in the north but truck doesn’t get driven in salt but also it’s such a tiny hole and blocked by the rock right and screw so shouldn’t be an issue
What size are those selftapers
Why would you waste all that time taking out the inner fender Wells ?
Did you wire in any relays?
How did you gloss out the black strip between the windows?
Ja Pod 3m gloss black vinyl wrap
Enjoy watching your vids, and the truck looks awesome. Keep up the work!
Cody W thanks man I appreciate that!
Gotta get white cab lights and mirror lights to match
does it have bluetooth? i got some lights very similar for free and im having trouble with them
How did you make the door posts gloss, tint?
Mike vinyl wrap
Where did you get connectors
Amazon
Did you use a relay?
Fuse
How many feet of wiring did you use?
I wanna say about 50 x 2
@@YamRida468 sweet thank you!
Looks great! Did you run a individual wire for each light all the way to the front?
No I grouped them together as they went towards the front
And thank you!
Can you do a all your mods video and how much?
I’ll see what I can do!
?what wire should i buy with them and how much?
Depends on truck and lights
Looks awesome man! I’m definitely going to install them on my truck!
SixSix Motorsports thanks man! Definitely worth it!!
How did you get 24 rock lights to work with one switch
rocklow-x led rock lights has some for $312 and its only 16 but there bluetooth and you can chnage the color options sound worth it or no? Looking into getting some
Ismael Dominguez that’s not to bad because they’re Bluetooth and you can change them! I didn’t go that route because the white isn’t that bright on multi color leds and that’s all that I want to run. But if you want to run different colors that’s not a bad deal
You have a new sub bro
Thank you! I appreciate the support!
Are they legal to drive around on city streets cause their white lights?
Kevin Turner yes from what I’ve been told
In Ohio you can have any color they just can’t flash or change colors while running.
That’s sweet!
Just a fellow Ohioan comment