Creo 3.0 Sheetmetal tutorial: Convert imported geometry to Flat State
HTML-код
- Опубликовано: 11 сен 2024
- Imported geometry is sometimes hard to transform as Sheetmetal model. If you use my technique - transform solid model to surface and then you use offset feature, you can unbend any imported geometry and selct only necessary surfaces to unbend - create a Flat State.
Tags: #creo #creoparametric #creotutorial #tutorial #4kside #vpalffy #vladimirpalffy
Amazing tip Vladimir!!
Thank you, have a great day.
Davide, I try to find always something interesting for Creo designers - like you are :)
Thank you, exactly what I was looking for.
Nice, Thanks Vladimir.
Good job Vladimir!
Exceptional........sir its a request please do a video tutorial on die form and punch form
Hi, thanks for your idea 💡
thank you very much
Hi Vladimir, Explanation with subtitle was great. It would be greater if you can explain it with both voice and subtitle.
Thanks for your comment ... all new creo tutorials are with "voice" - I have new microphone for it :) Stay in touch and I will post new Creo tutorials soon :)
Hi Vladimir, i have tried the identical steps on Creo 2.0, but there was a difference, please check below.
When you need select the first surface for the copy/paste fuction, you use "shift"+"click_select", but i can only use "ALT"+"click_select".
BR.& Thanks your useful tutorial.
Tom Chen
+Tom Chen Tom... good job, you are right. If you need to select any object in Creo you can use automatic filter (ALT button from the keyboard)
Hi sir good job. I tried but in sheet metal after taking copied surface then go to offset surface means all surface are select individual not take fully. Kindly give solution regarding for this.
Thanks
Thanks for your question. When you need to select all surfaces (quilts) please seletect filter on bottom right corner and select quilt.. Than, select surface.. System will select quil (all connected surfaces)
How to shift and select surface its does not work please reply
Not taking surfaces after selecting shift facing issues can you do it again from the scratch
Hi sir., i am watching your channel and your videos are clear and useful. can you please share some video for transitional unbend in creo sheet metal.
Hi Mani, thanks for your positive feedback and good idea for another sheetmetal tutorial. I will prepare and share it soon. Stay in touch. Vladimir
Hi Mani, sorry for my late replay, but I have been a little bit busy. I have created 2 video tutorials for you - based on you idea: 1st - ruclips.net/video/4Fp_Fp7t05E/видео.html 2nd - ruclips.net/video/7ZEv4sCa8Ww/видео.html Thanks for you question, Vladimir
Hi vladimir this tutorial was good and nice., and this is useful for unbend critical parts.. but i asked unbend feature related to transitional unbend..
how to use transitional unbend tool in creo.
Hi Mani - can you send me please some example -of your question / picture or 3D model: vpalffy@4kside.com Thanks, Vladimir
There is only one video available for transitional unbend with me.
how to generate perimeter by using Parameters and link with Excel sheets?
Hi - I will create short tutorial for you :)
You can create 1000 of Parameters in just a click.
Even you can fill all the Parameter values in a single click.
You can create 1000 of Parameters for entire assembly in just a click.
There are very simple way to do that.
How to open critical part
Hi, can you specify your question? What does it mean critical part?
Hi sir, can you guide me regarding how to convert unbend sheetmetal 2d drawing in bend sheetmetal3d?
Thanks for your idea of new tutorialt. I will try to find some example. Stay tuned, Vladimir
I feel that your question is to build a 3d bend sheet metal part from a flat sheet metal drawing. Is it like that?
But why you need in that way? Because the actual development flow from bend to flat, not flat to bend.
We 1st design the part and then find the flat dimension. How can you predict the flat length of any part initially and develop the part? Anyway... you can use bend option and convert a flat sheet to 3d part. I am expert in sheet metal and you can ask any question related to sheet metal.
Taking whole step part as one aftr importing it as a surface also
Hi, if you import model, you can by Edit definition select that model will be surface based. Confirm and than select one surface Copy and Paste and select another surfaces for transformation. Then you can set Offset feature and it is done. :) Good luck.