Jenna , you're like the energizer bunny. Great video explaining everything. The Pinkways idling sound so bada** . Then when they idle up, go from bada** to sounding like 1000 very angry hornets .
The best way I see the set up you have is that you and Ben both are gonna need to be on each end holding the board the saws are mounted to and hold them in an even line across the cut. You were able to get somewhat of a cut but you had saws starting to cut before others and before you got to the end the last saw wasn't even cutting and the first saw was almost done so you need to get that cutting straighter to prevent binding and actually make straight cuts to get accurate results.
You have the exact word for this...INSANE. So much to do and get going at one time! It was hilarious and nerve racking at the same time. Never racking because of getting the saws to srart and stay running while you then got them at full throttle. That's the nuts part, the nerve racking part. Kind of like lighting 30 candles on a birthday cake before the first one burn out. I so look forward to round 2. May you have great, useful quick acting ideas. Wow!
This was crazy. Probably the log was not really cut in 10 pieces at end. I don’t think all the saws went through the log, just the first one and all fell on the ground. My OCD will try to make it perfect and to do it again, but I guess good enough for the entertainment value of a ticktoc video
It was definitely an entertaining video but I know there’s some improvements you’ll make to make it even crazier… I now need to get a pink way and port it to race against the 10 saws😂
@@chainsawjenna I’d love to fully port polish and pipe one and TRY to balance the crank like I would on a dirt bike, I wonder if the crank is just a little tweaked
Just a suggestion use zip ties to hold throttles wide open great job you rock and your husband was a great helper don’t ever stop doing you love your video and how talented you are God Bless you and your family 🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🌹🌹🌹👍👍
I'm so glad Banjo made sure no one got hurt. Banjo's On My Pinkway Knee. Pinky Banjo You do realize that Banjo gets copyrights for these names.😂😂😂 As payment he requests pupachinos once a day, plus treats. 😂😂😂😂❤❤❤❤❤❤
Bonjour Jenna. Je viens de m’abonner à votre chaîne RUclips. Pourriez-vous refaire un test comparatif avec les scies électriques EGO CSX5000 et le Stihl MSA300 ?👍
this 10 chainsaw will cut like 4 times faster ok with only gravity push them down 3 times let say with this frame with 30 hp +/- vs ms500 i have only like 7 hp so yea it have no chance against against 10 pinkchainsaw 👌🏻 just whole setup must cut more precisellly let say and not stuck on one side asf 👌🏻
Jena your out of this world. Your are one of a kind.your videos make me wonder what you will do next. Ben and Banjo hang in there. Under all this madness is a good lady. Love you guys. God bless.. one thing Ben shouldnt be running chainsaws in shorts . Safety first.. 😉
You’ve convinced me to never buy a pinkway.
don't worry I think I bought them all ahaha. Its my public service to everyone
Don’t know how someone would need help being convinced to not buy one of these. Maybe these would be perfect for your type lol!
Jenna , you're like the energizer bunny. Great video explaining everything. The Pinkways idling sound so bada** . Then when they idle up, go from bada** to sounding like 1000 very angry hornets .
Awesome episode. Would still love to have you on my firewood addicts podcast on my channel, let me know if there's any interest. Keep cuttin'!!
id call it ten to life
bolt that to a bobcat bucket
Might not work great, but the 10 of them running together sounds Badass!
It's so much louder in person!
Dba?@@chainsawjenna
13:15 Next on "Top fuel Chainsaws..."
Great video Jenna. Good luck getting everything figured out. Need them to start cutting at the same time
I know, that was the biggest issue. we have some ideas to fix that
The best way I see the set up you have is that you and Ben both are gonna need to be on each end holding the board the saws are mounted to and hold them in an even line across the cut. You were able to get somewhat of a cut but you had saws starting to cut before others and before you got to the end the last saw wasn't even cutting and the first saw was almost done so you need to get that cutting straighter to prevent binding and actually make straight cuts to get accurate results.
Build it on the back of your tractor using the 3pt hitch to lower the saws!
You have the exact word for this...INSANE.
So much to do and get going at one time!
It was hilarious and nerve racking at the same time. Never racking because of getting the saws to srart and stay running while you then got them at full throttle. That's the nuts part, the nerve racking part. Kind of like lighting 30 candles on a birthday cake before the first one burn out.
I so look forward to round 2.
May you have great, useful quick acting ideas. Wow!
This was crazy. Probably the log was not really cut in 10 pieces at end. I don’t think all the saws went through the log, just the first one and all fell on the ground.
My OCD will try to make it perfect and to do it again, but I guess good enough for the entertainment value of a ticktoc video
Craziest video yet 😂
hahah thanks!
It was definitely an entertaining video but I know there’s some improvements you’ll make to make it even crazier… I now need to get a pink way and port it to race against the 10 saws😂
I tuned my original one, and it cuts pretty good. Just vibrates so bad!
@@chainsawjenna I’d love to fully port polish and pipe one and TRY to balance the crank like I would on a dirt bike, I wonder if the crank is just a little tweaked
@@SomeGuysSawShop If you want, when I finish up with this contraption I'll mail you one and you can go wild with it! hahah
@@chainsawjenna lol, I’m down… if I can do what I think by the time it makes it back to you it should be as fast or faster than your 500i
Imagine how cool that would be with 3120s or 881s! Jenna is the whistlindiesel of chainsaws.
that would be so loud!!! and awesome haha
Awesome Love This !
The Log A Nator
I like the name.
You really impressed me!
The way you start the 500i
Wow your a mean machine
I'll tell ya...a three second difference ain't bad... ain't bad at all...lolol 🤣🤣🤣🤣
Awesome video, The name should be something as wild as the contraption.The Screaming Wood Warrior.Or something.
Hi Jenna! I’m a left handed chainsaw newbie, any advice or tips you can give me about to how to operate the chainsaw as a left handed? ThAnk you!
Just a suggestion use zip ties to hold throttles wide open great job you rock and your husband was a great helper don’t ever stop doing you love your video and how talented you are God Bless you and your family 🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🌹🌹🌹👍👍
That was a crazy video. Great job!
I'm so glad Banjo made sure no one got hurt.
Banjo's On My Pinkway Knee.
Pinky Banjo
You do realize that Banjo gets copyrights for these names.😂😂😂 As payment he requests pupachinos once a day, plus treats. 😂😂😂😂❤❤❤❤❤❤
i’ll always buy stihl! love you jenna
Bonjour Jenna. Je viens de m’abonner à votre chaîne RUclips.
Pourriez-vous refaire un test comparatif avec les scies électriques EGO CSX5000 et le Stihl MSA300 ?👍
Your the reason there out of stock on Amazon😂 let me buy one of yours! Lmk I will take ok!
10 Ms 261s would be be better or 550 xp mark 2 for something like this but that's just me lol
Next time try with 10 husqvarna chainsaw 😂😂😂 #HusqvarnaMerda
That was a little wild!!
How much
this 10 chainsaw will cut like 4 times faster ok with only gravity push them down 3 times let say with this frame with 30 hp +/- vs ms500 i have only like 7 hp so yea it have no chance against against 10 pinkchainsaw 👌🏻 just whole setup must cut more precisellly let say and not stuck on one side asf 👌🏻
I got a name for it
what is it!
@chainsawjenna it should be called Jenna's nightmare lol
Oh shes out here making death traps lol
Original
Get Ben some safety gear.
cool!
😂😂😂😂😂😂😂sei fantastica ti adoro ❤❤❤❤❤
🔥
You funny special women
Jenna death trap of mystery
hahaha
Sthil ms 720 model make a video miilling
Insane
Vous êtes fou❤
Pink it
Wouhouhou
Ya crazy ❤
😳☠️
These saws are JUNK!! Ripoff of Husqvarna...
Jenna i love u.❤yours smaile
Booooooooooooooring 🥱🥱🥱🥱🥱🥱🥱🥱🥱🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌🛌
great video!🤩 and I send you a lawn mower collaboration email,waiting for your reply!
This looks like something Colin Furze would do. Maybe y'all could work together on the next one.
Jena your out of this world. Your are one of a kind.your videos make me wonder what you will do next. Ben and Banjo hang in there. Under all this madness is a good lady. Love you guys. God bless.. one thing Ben shouldnt be running chainsaws in shorts . Safety first.. 😉
К психологу срочно!
lol
Looks like a gutless saw. Cheap af.
Wow the terrible ten!
I want all on 1 throttle and 1 off switch
them all hooked up to one throttle, is actually one of the ideas we are tossing around
3:00...Do you have enough chainsaws? Who does???? LOL