We Built A Lean-To Shed Against The House
HTML-код
- Опубликовано: 18 фев 2024
- Watch as we install an 8x10 lean-to shed against the house. We will show you the process from start to finish. #boisegreenhouse #meridiansheds #nampasheds #timelapse #customshedsboise
Shop our Products:
Quiet cool solar fan- amzn.to/4arwf39
Door handles: amzn.to/49p8NT0
Door Hinges: amzn.to/3xroRX3
Gable mount attic fan: amzn.to/3VIq6Lx
Barrel bolts- amzn.to/4cIsVlL
Camera Gear:
Sony zv-e10 video camera- amzn.to/3WazGag
Tripod- amzn.to/3Qe4AL9
Tripod- amzn.to/3UrJUSk
Drone- amzn.to/3UszFx3
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that we provide we may receive a small commission. There is no additional charge to you!
![Kehlani - Next 2 U [Official Music Video]](http://i.ytimg.com/vi/MpI7ekFG8A0/mqdefault.jpg)
I won't give negative comments.
Nice to see men who still work.
Thank you!
No electricity inside?
Not that we know of. The customer could always add that down the road.
@@stormorsheds2970 why would the customer add electricity down the road? The outlet will be too far.
While raising my children after their mother took off I built sheds like this during the day while the kids were in school. It paid the bills. I could do one like this in a day when I was in top form. Larger free standing dutch barn style might take me 2 days or so. I ran an ad in the newspaper year round and took orders via phone. I'd load up my van and build on site. My prices began at $300 for an 8x8 with unpainted plywood sides. I think the most expensive was around $1600 for a 12 x 16 barn. I built the trusses on the floor deck once it was completed, then built and raised the walls and truses, roof and trim. I had it down to a science (as long as the customer let me alone I could knock them out fast). Fond memories of my younger years. I'd get my kids to help me paint trim on sawhorses on the weekends. I was getting 2x4's for $1.39 and panels for $3.88. I probably couldn't build one wall for that kind of money, now.
Thanks for sharing, building sheds can be pretty fun. What state did you build them in? And yes, pretty crazy how much more lumber costs these days than it use to.
That is just a nicely built shed. Great work guys!
Thank you!
Don't forget your permits.If not coded forcement will force you to take it down. And you will get a fine Make sure you do your homework
Yes, it’s always a good idea to check with local building codes first.
3 guys to tilt that wall at the beginning was kind of funny.
We forgot to eat our wheaties! Lol.
Nice job!
I notice flashing used between the house and the shed strictly depends on the caulking to keep the water out. Expansion and contraction between house and shed will fail the caulking.
The floor framing appears to sit on the gravel. Eventually, the floor framing will rot from ground moisture.
Thank you. The flashing is used to seal the shed itself off not to keep water from going between the house and the shed. Rain water will be able to run down between the two structures but won’t be trapped behind it. The silicone used was just to cover the exposed nails used to fasten the down the flashing/metal. There are pressure treated skids under the floor sitting on concrete patio blocks. We’ve built our floors this way for 40 years without issues. We also offer a steel base for folks who would rather have steel over wood. Appreciate the comment, hope you enjoyed the video. We have lots more on our channel.
Why not steel roof ,??? Less labor
I like the shed I do have concerns for the top of the roof and driving rain causing water getting between both buildings and not having a good way to dry out. I see the siding on the back side of the shed to protect it from rain getting between but an area like that may be a little concern for me long term. I may be wrong and I'm not bashing you guys at all. Nice little shed.
We’ve been building this design for 30 plus years and have never had issues with moisture build up between the house and shed. Appreciate the comment! Constructive criticism is never a bad thing. We have quite a few other videos on our channel you can check out as well. Thanks for watching. Out of curiosity what state do you live in?
@@stormorsheds2970 Thanks for responding. I live in Wisconsin. The reason I responded was I had a small shed that was right next to my garage. (Not exactly like yours but somewhat similar) I replaced it with a much bigger 12x14 stand alone about 20 feet from the garage. Anyway when I tore down the little shed, the vinyl siding was moldy and the bottom 1x10 sheathing on the garage had an area that was wet and punky and had to be torn off and replaced. Not rotted on the plate or studs but sheathing was bad. Also the top of the block of the garage foundation was degraded and falling apart. All right where the shed was. I think the moisture sat there and was able to wick up a bit for years. SW exposure maybe had something to do with it too (?) Yours was closer to the main structure and may not allow much driving rain or catch lots of snow to sit on the roof and against the main building to melt and drip down between. Lots of factors, I will check out your other videos too!
You bet, we always try to respond to comments. Idaho is a pretty dry state, not sure about Wisconsin. A 12x14 shed is good size but seems no matter the size it’s always easy to fill up, haha. Hopefully you’re making good use of it!
Nice job 👍
I was wondering the same thing so thanks for asking and thanks to @stormorsheds2970 for responding!
Very nice build and the siding they chose looks fine on that side of the house. New subscriber also!
We agree, but everyone has their preferences. Thanks for subscribing, you’ll have to check out some of our other videos as well!
I would have went horizontal but it still looks Great 👍can always run an extension cord for power
Ya, the horizontal ties in better but ultimately it’s the customer decision on which option they want to go with. Thanks for watching!
Quality work is not easy to find these days. Well done. I just priced material for a 12x12 shed at just under $2k. Kits are going for $3-4k.
Thank you, appreciate the positive feedback.
Thumbs up for sure! Thanks so much for sharing this. I was just looking at building something similar but as always started my journey here to see how much work was involved. Thinking I'll need to hire this one out or it'll take me all summer. Great video!
Thanks for watching. Good luck with the upcoming project. I’ll be posting another similar build this one in the next 3 or 4 days.
Great job fellows. Looks fantastic!
Thank you, very much appreciated.
Great idea!
Thanks!
Really needed horizontal siding.
Looks great.
Thank you!
Great job.
Thanks!
looks great , dude
Thank you! Appreciate the positive feedback.
Honey bees, rats, opossum, and skunks all love sub area like that, seal it off with 1/4 inch wire mesh, or use a slab.
Wire mesh or lattice works well. We have skirting option as well. How To: Skirt Your Shed And Keep Animals From Getting Underneath it
ruclips.net/video/eUatij4N1jw/видео.html
Thank you, Sir. For replying, I salute you, 🫡 For, I do swing a hammer too, to pay my bills and teach the young bucks also. Thanks for the video.I'll look at it later today. My key notes I pointed out are from experience. Take care.
You bet, hope you enjoyed the video!
Great job. Any issues with water getting behind the build in between the house?
Thank you. We’ve never had issues like that and have built thousands of lean-to sheds.
That's the same thing I was thinking also, he didn't put a level on the bench framework to make sure it was a level prior to installing it blew my mind.
What about flashing to prevent rain in between? Was it done? Nice and quick build!
Are you talking about the workbench potentially not being level?
Rain water can get in between the structures but it won’t be trapped behind it. It shouldn’t be an issue. Both structures are sealed. Also the shed is not attached, it’s just setting next to the house.
Good job 👍
Thank you!
If you keep the floor sixty four square feet or less, in our town it won't need a permit or inspection. Imagine other towns are similar.
That’s a great looking shed, but no foundation. High gust winds could blow that shed away from the house, I would hammer 4 feet steel rebar into the ground around the shed touching the floor joints then bolt each rebar to the floor joints.12 rebar should work
Thanks!
Excellent work the only complaint is the roof the drip edge corners had to be miter not cut, the shingles every four lines you must displace the 6 inch pattern so the roof will not show a pattern of a staircase I will have done the same been it’s a shed but I will never lay drip edge and shingles on a home the reason is the 6 pattern doesn’t tied the roof the wind can easily rip the shingles out when you displace the 6 inch pattern for every four lines of shingles you get the shingles tie better and be stronger when high wind hit it making it difficult for the wind to tear apart
Thank you! That’s interesting about changing the pattern every 4 rows. Makes sense, just never heard that before.
On the vertical back side of the shed next to the house how do you keep moisture from getting in? There should be a small gap between the vertical trim piece and horizontal house siding. I just wanted to know what you used, I did not see anything. Tks.
I’m not sure what you mean. Are you referring to the metal cap we use after all the shingles are installed?
I agree with some here the shed is okay, but there are concerns about the way it is built and water issues. Also, the hinges should be on the inside because anyone can take those screws out and access the shed. The siding should have been installed horizontial to blend with the home.
We have a security package we offer on the doors and also other door options with dead bolts for those concerned about that.
@@stormorsheds2970 I get that from your previous reply to others but no one should have to pay extra to have the hinges installed inside the door as opposed to the outside. You would not expect to have that if you paid hundreds of dollars to have your house front door installed that way right? Just saying.
That type of door is designed to have the hinges on the outside. It gives it a really nice look. Security is important, but it’s pretty rare that someone would jump a fence, break into a backyard shed and run off with the lawnmower and garden tools. If that’s a concern we have completely different doors that are more secure.
I'm going to build a lean-to greenhouse against my stucco walled house. Can I screw into the stucco/stud or should I build it off the house like you guys did? Also should I have a back wall against the house to prevent moisture on house exterior? Thanks, good job on this build and videography
We build them up against the house but don’t attach it. Probably the simplest way to do it. We have a back wall so it’s still a four sided building that can be moved if need be. Thanks for the comment.
Thanks for this video. I'm learning framing. Do the floor joists have to line up or match up with the back wall studs?
We’re glad you liked it and thanks for watching. No, that wouldn’t matter but since everything is 16” on center then they will line up.
@@stormorsheds2970 Thank you for kind reply. I am talking about the floor joists that are closer together here at 0:39 and the wall studs that are closer here at 3:00 . I usually see on pictures they are matched up.
Oh gotcha, no they don't need to line up.
@@stormorsheds2970 I see. I guess it makes sense to not necessarily have them lined up. I've been watching your shed-building videos. Really amazing from the time the truck pulls in and to the finished shed. I see you pre-build the framing in your factory. Would be interesting to have a video of your factory someday.
Just seeing this comment. I would like to make a video showing our factory, that would be good to show. Glad you’ve been enjoying the videos! Appreciate you watching and the comments.
Should of used Pressure Treated floor joists, and plywood floor.
Do you guys have an assembly shop , you should pre- build the walls in the shop and assemble them on the job , i was a production supervisor for tuff-shed, we had 2 man crews that would assemble them in about 3 hrs. On the job, most crews can do 2-3 jobs a day in 8 hrs
We do, we assemble the walls at our shop but still attach the siding on site. Very cool, what part of the country did you work in?
@@stormorsheds2970 i worked at a tuff shed in Albuquerque, nm. But now i am a sub contractor for the insurance industry building accessibility ramps in the state of nm.
@@stormorsheds2970 you guys should try siding the walls in the shop also, its an incredible labor saver, you have a carrier to carry the walls that wraps around the studs , 2 guys can carry a 16’ wall all completed ready to set in place
Interesting to see the difference in construction techniques between the US and UK. The "Caulk" you use, is it water based, or silicone? For external joints, we tend to use silicone, what with the fact it rains here 50% of the year! :)
We use a water based caulk on the siding and trim. Any exposed nails on the roof would get a silicone.
Can you build a shed next to your house without permit?
You’ll want to check into your local building codes but in this particular area a permit is not needed. It’s still its own 4 sided structure and is moveable as well.
Its very nice bit id go with horizontal shiplap
Yes, horizontal siding would have looked very nice.
Horizontal 12x12 feet ?
Nice but I suggest the hinges be on the interior side, being it will be used for storage purposes especially. That's a great idea, nice job
Thanks. We offer a security package on our hinges and also offer more secure doors if that’s a concern. Appreciate the comment.
Sorry, but it up to what works. I prefer my hinge on the outside. I built my own door with weld on hinges and on the inside. I have a cabinet and a tv mounted on the inside of the door, so when I'm working outside, I can watch tv, and the cabinet has rags and other things I can get to easily it's a beautiful door and I've never seen anyone like mine.
Do you have a picture or video of the door anywhere? I’d love to see it.
@stormorsheds2970 I put a couple of videos up. I have trim yet to put on and paint, but just look under my name.
Do you sell shed plans and materials lists for a DIY'er?
Currently we don’t have anything like that we offer. Might be something we look into.
For the most part it blends in and looks apart of the house. Almost looks like an edition was added
That's always the goal!
Nice build, thanks for posting the video. One question, what's the pitch on the roof?
Thank you. It’s a 2/12 roof pitch.
Is it tied to the house or just free standing?
It’s free standing and not attached to the house.
Nice . Better than I could ever do, at the moment. I will keep learning.
Haha! We get a lot of practice.
Cool idea but still I'm no fed just asking a honest question do you need a city permit to build anything next to your house
You’ll want to check with your local building codes but around our area it is allowed. The shed is not attached and still its own separate structure. It can also be moved if need be.
@@stormorsheds2970 Good to know thank you 😊
Why not mount the t111 sideways?
Good question. I suppose that could work.
Lòks good° nice job ¡ price of ?????
Where does all the caulking/silicone go on ?
We silicone above doors and windows and exposed nails on the roof. The caulking gets painted over.
I would install the door on the side for easy reach.
We still had a good 6 or 7' between the fence and shed but I see why that might be more convenient.
Depending on where you are living, this "shed" may not qualify as a garden shed, which has height and dimensional restrictions. This will be classified as an attachment that is not movable and will require permits with typical boundary restrictions. Before anyone goes this route, you need to check with your local requirements for compliance. Don't just blindly trust the contractors.
It’s always important to check city code and regulations before installing a shed. In our area a permit wouldn’t be required on this size shed. It’s not attached to the house and definitely a portable, moveable structure.
I built a playhouse like this beside our garage. One corner was about two feet from the property line. When we were in the process of selling our home, the Surveyors would not issue a Real Property Report. We appealed to the City. They also denied our appeal. To save any further expense, I took it down.
That’s a bummer. Sorry to hear.
Looks good but a little bit rough.
How is it a little rough?
Was Tonto the cameraman? 🤔
Yes, he actually was.
How much cost of the shed?
What part of the country are you in? We are based out of Idaho
No gutter !
A gutter could always be added.
Whats the cost to build this shed
You’re looking at right around $3980 plus tax on one just like it with our current pricing. That includes installation as well.
Were are you located
Meridian Idaho. Check out our website. you can design your own shed, and it will price it out for you.
It's just a regular Shed !
Yes, but a lean-to style.
Why would you put hinges on the outside? You can literally just take the hinge pins out to get inside...
We offer a security package and also more secure doors for customers with this concern.
Hoy much is the Labor Cost?
Our sheds include material and labor all in one price. We are out of Idaho. Where are you from?
they forgotten the rain issues not gutter no down pipe
plastic roof and play wood no concrete on floor no last long the rain will rotten the door
Children job
It’s a shingled roof, not plastic. Thanks for watching, we appreciate comments good or bad. That shed is going to last for years and years!
@@stormorsheds2970 suppose to seat on a concrete slap
Where the rain go from the roof ??? On ground near door cause mud
There’s gravel around the shed. It won’t be muddy.
Looks great but what's the point of a lock or heavy duty door if you have the hinges mounted on the exterior? Someone could just take the door off the hinges with a screwdriver. I suggest reworking the design to fix that because it's a major security flaw.
In a residential neighborhood theft doesn’t seem to be much of a problem. But we do offer a security package on the doors as well.
@@stormorsheds2970Going to be honest, this is not a good response to physical security from a company, even if you're just a group of guys. Especially when you're dead wrong - residential neighborhoods are the MOST common locations for property theft.
We appreciate the honest feedback. We’re always trying to improve anyway we can. You’re absolutely right, security is very important. We have doors with deadbolts and roll up doors without exposed screws we also offer. We give our customers the different options and let them decide what’s best for their shed.
@@stormorsheds2970right, but why is the default option on any of your doors to have the hinges facing the side of the lock?
I’m not sure what your question is?
Rent it out to section 8
Not a bad idea!
Tuff sheds are more durable..it could only be built one way ..
Tuff sheds have a nice product.
Then water runs between and ruins your house
That won’t be an issue. It’s no different than rain water running down the walls of the house anywhere else on the home. It won’t trap the water, it’ll run down the wall onto the slab and dry.
bad footing and no water tight to between the building. It will harm to the main house rotten wall in the near future? you don't get pay from me?
From our 40 years of experience building sheds there shouldn’t be any issues or rotten walls. Appreciate the comment and opinion though.
Guys ! Not to sound so critical but you guys should really learn , and implement , proper construction techniques before you go posting videos of yourselves building something. The biggest thing I get from your video is evidence of incompetence for the homeowner when they decide to sue you for the way you built their shed. And YES , I KNOW how to build ! 37 years as a WELL TRAINED Union Carpenter including working for a time with a COMPETENT shed company as their shop foreman and ONLY person qualified to do warranty work. Go learn some things before you end up losing everything you own !!!
What specifically did you see that would make you say we are incompetent? Maybe you could expand on that and also give some pointers on how we can improve? I’m excited to hear more.
@stormorsheds2970 From the very beginning. You used untreated lumber which is in close contact with the ground as well as ACTUAL contact with concrete or concrete products. Secondly you NEVER put 2 finished walls back to back in an outside environment because that is inviting mold and mildew into the airspace between the walls. It doesn't matter how close you get those walls to each other there WILL be airspace ! Thirdly you don't put asphalt shingles on roofs under a 2/12 pitch and in most areas cade requires a 3/12 pitch for asphalt shingles. Fourthly you put your flashing from roof to wall UPSIDE DOWN ! This flashing should have been tall enough to go under the horizontal siding on the house. It also should have been sealed on both buildings. Anytime you have a wall to roof flashing where the roof is under a 3/12 pitch it MUST be sealed to the roof to prevent rain 'blowback' from getting under the flashing. My guess on your roof pitch is somewhere around a 1/12 to a 1 1/4 /12 pitch. That low of a pitch on a roof in most places will ONLY allow either metal roofing or rolled asphalt roofing. Then fifthly your door! You NEVER mount a door flush to the door trim. It's inviting rain to come right on in. A door should at worst be mounted flush with exterior siding and at best inset half the thickness of the exterior wall. I'm sure I'd I paid closer attention I could find other things wrong here. I'm not telling you these things to be mean or spiteful. I'm telling you from my lifetime of construction experience ! I very seldom get critical with someone on a public forum but I meant what I initially said ! If you keep building things this way you will , you WILL , eventually end up in a lawsuit over it and it won't be just the price of the shed. It'll be over damages caused to the existing structure. I've seen it happen before to people who chose not to listen to good advice. Take my advise. Hire someone who can TEACH you proper building methods or take some courses on them . Better yet , join an apprenticeship program ! I learned under a father who was highly skilled in construction and yet cared enough about my education as a carpenter to INSIST that I complete all 4 years of an accredited apprenticeship program. Best of luck guys. And there ARE people out there who are retired or semi retired that would love to be able to work with yall a few hours per week to share their lifetime of knowledge. And MOST would do it at apprentice wages !
Hmmmmm...Not to be negative but rats and possums etc will breed under that shed big time...
It’s in a residential neighborhood, might get a cat or two wanting to crawl under it but shouldn’t be much of an issue. We offering skirting that goes around the shed for customers who are concerned with animals getting underneath their building. ruclips.net/video/eUatij4N1jw/видео.htmlsi=a4xu9H9zjzc3_4M3