Great video, thanks. If you be kind to answer 1 question. What is best way to connect DJ controler FLX 10 to DI box and what box is best to use. Since output of flx 10 have 1 MASTER (XLR) 1 MASTER (RCA) 1 BOOTH (1/4 inch TRS Jack) 1 PHONES (1/4 inch stereo phone Jack) 3.5 mm stereo mini jack x 1 I want di box after my controller and before my external analog mixer from there i go to speakers. Or should i go with shielded link cables like Vovox to secure connection between controler and analog mixer from interference?
Hi …Great review 👍👏 My Roland 30/80 and my Kurzweil 2600 are buzzing even with a Hum Ex connected to the plug ….I bought a Pyle for 29 bucks off Amazon and it definitely made a difference BUT it does take low end out and does color the sound a bit….what I would like to do is go out of my sound module outputs into this Radial E box and go into my Apogee Duet using a female XLR to the Apogee 1/2 inch….do you feel this would be a much better choice ?
Hi. Ty for the info. Q: on a radial proD2 do i need to connect 2 XLR cables from the box output to the mixer (2 channel) input so it will sound stereo? The mixer is 40 feet away so i need 2 long cables correct?
Each channel (L/R) will pass through separately. Example, if I input an acoustic guitar that has a build in amp, the source is mono and will be passed through the box in mono. Yes, you'll need a XLR cable that is long enough to go from the box to your mixer.
Great video, thanks. If you be kind to answer 1 question.
What is best way to connect DJ controler FLX 10 to DI box and what box is best to use. Since output of flx 10 have
1 MASTER (XLR)
1 MASTER (RCA)
1 BOOTH (1/4 inch TRS Jack)
1 PHONES (1/4 inch stereo phone Jack)
3.5 mm stereo mini jack x 1
I want di box after my controller and before my external analog mixer from there i go to speakers.
Or should i go with shielded link cables like Vovox to secure connection between controler and analog mixer from interference?
Thanks for the comment. Your question unfortunately is above my pay grade. I only use the box with amplified acustic guitars into a mixer.
Great review. Exactly what I’m after for a stereo out acoustic pedal board. Wanting stereo on stage and through the PA. 👍
Thanks Ron. Let me know what you think of it once you've had an oppertunity to use if a few times.
Hi …Great review 👍👏 My Roland 30/80 and my Kurzweil 2600 are buzzing even with a Hum Ex connected to the plug ….I bought a Pyle for 29 bucks off Amazon and it definitely made a difference BUT it does take low end out and does color the sound a bit….what I would like to do is go out of my sound module outputs into this Radial E box and go into my Apogee Duet using a female XLR to the Apogee 1/2 inch….do you feel this would be a much better choice ?
Hi. Ty for the info. Q: on a radial proD2 do i need to connect 2 XLR cables from the box output to the mixer (2 channel) input so it will sound stereo? The mixer is 40 feet away so i need 2 long cables correct?
Each channel (L/R) will pass through separately. Example, if I input an acoustic guitar that has a build in amp, the source is mono and will be passed through the box in mono. Yes, you'll need a XLR cable that is long enough to go from the box to your mixer.
Can this send two different signals out? I'm looking to send a guitar in to it and out and also looking to send a vocal pedal via jack in to it?
It has a left and right channel so yes?
I've only run guitars 🎸 through it though.
Yes you can do that,
@@marioyoutube7700 Thanks for the input (pun intended!)