Hi! Thanks for the kind words. The capsule top does not rotate if you're holding it normally. It will only rotate if you make that motion on purpose if that makes sense. I hope this helps!
Love the set up on your etokki! I also have a Korean edition and I want to switch to the ufb fusion. Just wanted to ask, is it easy to install the ufb fusion? I’m new to this kind of thing😅
Yo! Thanks for the kind words. I can try to take a picture, but I used this bundle on Amazon: a.co/d/9ZyK7zu & a printer cable here: a.co/d/7wuKrMA. Then you'll need these from arcade shock (3M Adhesive for PCB and Harness Converter for Korean lever): arcadeshock.com/products/self-adhesive-3m-pcb-feet-set-of-4?_pos=1&_sid=7b4b430d5&_ss=r & arcadeshock.com/products/crown-samducksa-5-pin-to-8-pin-harness?_pos=1&_sid=5a327fce4&_ss=r. Lastly, here's a picture of how it roughly looks inside the Omni. I'll link an Imgur post: imgur.com/a/pXxc4gQ Hope this helps! It's hard at first, but follow schematics from the manufacturers on the colors of their cables, and you'll be fine. If I can do it after not tinkering with arcade sticks for three years, I think you can, too :) Take your time and check your work (game test) before screwing the fight stick back together! LMK if you need anything else. I'll try my best. Schematics can be found here: www.brookaccessory.com/Archive/_tw/upload/1_2.png & arcadeshock.com/cdn/shop/files/AS-New-Wiring-Guide-JLFH187-HARNESS_large.png?v=1707262473.
Hi! If I'm reading this correctly, then you should be fine. The collar does more so with its width and whether it fits inside the arcade stick. It's been a while since I dived into levers though. The Korean one is the biggest circle, so it should be compatible with everything. However, if you want the plexiglass to perfectly match the width of the plastic ring, then getting a Japanese plexiglass from Focus Attack wouldn't hurt, and it's cheap! I hope this helps you.
Hi! The default PCB for the Omni indeed has no good R3 or L3, but if you do the Brook UFB Fusion conversion, I did have two of the back buttons for R3 and L3 in practice mode. Then the remaining two I made start and select IIRC. I hope this helps!
Hi! If you use the old PCB, I'm not sure. Theoretically, if it was the Korean version of PCB, it should be plug-and-play. Before, the person used a Fujin IIRC and didn't have to do anything fancy. If you switch to Brook UFB Fusion, you will need a conversion harness if you use their default FGC cable harness. Cheers!
I used /r/freefightstickart to find a .psd file for my fightstick. www.reddit.com/r/freefightstickart/ If you want to do your own, there's a tutorial here: ruclips.net/video/9emdMGiBVoA/видео.htmlsi=vox_ByscUiY5sjj9
It does not hurt my wrist, thankfully! Despite the edges looking sharp for the plastic, they're okay. I usually wear long sleeves to protect my wrists, but my hands are also small compared to others. A bigger hand wouldn't have an issue!
Hey I have an Etokki Omni Korean Edition and I'm looking to grab the Knee Neo Lever. Do I have to order a JLF Plexi Cut for the lever or is the original Korean Plexi Cut just fine? Thanks in advance! Great Video too
Yo! Thanks for the kind words. Yeah, I think they are still available on www.us.istmall.co.kr/. I used the Korean Plexi Cut (which I had to get cut), but it would work fine with a Japanese Plexiglass. My brain defaulted to "Korean lever warrants Korean Plexiglass," if that makes sense! Basically, you can save your money, haha. One cool thing, though, is with the Korean hole cut-out, you can see the blue light come through the lever hole because the Brook UFB Fusion PCB is close enough (at least where I placed it). It makes it really easy to determine if it's connected or not. 😄
@@playboyceej613 Thanks for all the kind words, man! I hope your stick turns out well, too. Knee Neo Lever is definitely a game-changer. It's a nice plug-and-play lever; I never needed to adjust it. I guess Knee knows his stuff. 😆
Hi! Truthfully, I'm not sure, but I found these two threads: [www.reddit.com/r/fightsticks/comments/166lje8/psa_a_korean_lever_does_not_fit_in_the_hori_alpha/?] and [www.reddit.com/r/fightsticks/comments/prcnau/hori_fighting_stick_alpha_and_korean_lever/?]. You will need a 5-pin .187 to 5-Pin Conversion Harness from Arcade Shock to install any Korean lever into a Japanese arcade stick. I hope this helps!
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
👀👍!
solo leveling pretty good, really cool custom plexiglass cut design!
Thanks for the kind words! Happy to see someone else appreciate it. 😄
Cool stick! Sounds and looks really nice to play on
Thanks! It makes the sessions go by much faster 😅
Hey man, sick stick. If i had a japanese etokki omni, would i be able to just plug and play my knee lever? or would it require some modifications?
You would need a harness converter here. From there, you should be fine! Link: arcadeshock.com/products/crown-samducksa-5-pin-to-8-pin-harness
Hey, sweet stick! Does the capsule top rotate wildly, if at all?
Hi! Thanks for the kind words. The capsule top does not rotate if you're holding it normally. It will only rotate if you make that motion on purpose if that makes sense. I hope this helps!
Love the set up on your etokki! I also have a Korean edition and I want to switch to the ufb fusion. Just wanted to ask, is it easy to install the ufb fusion? I’m new to this kind of thing😅
Yo! Thanks for the kind words. I can try to take a picture, but I used this bundle on Amazon: a.co/d/9ZyK7zu & a printer cable here: a.co/d/7wuKrMA.
Then you'll need these from arcade shock (3M Adhesive for PCB and Harness Converter for Korean lever): arcadeshock.com/products/self-adhesive-3m-pcb-feet-set-of-4?_pos=1&_sid=7b4b430d5&_ss=r & arcadeshock.com/products/crown-samducksa-5-pin-to-8-pin-harness?_pos=1&_sid=5a327fce4&_ss=r.
Lastly, here's a picture of how it roughly looks inside the Omni. I'll link an Imgur post: imgur.com/a/pXxc4gQ
Hope this helps! It's hard at first, but follow schematics from the manufacturers on the colors of their cables, and you'll be fine. If I can do it after not tinkering with arcade sticks for three years, I think you can, too :) Take your time and check your work (game test) before screwing the fight stick back together! LMK if you need anything else. I'll try my best. Schematics can be found here: www.brookaccessory.com/Archive/_tw/upload/1_2.png & arcadeshock.com/cdn/shop/files/AS-New-Wiring-Guide-JLFH187-HARNESS_large.png?v=1707262473.
Thank you so much for your help! I’ll give it a shot😄
For the etokki, i have the korean plexi, do i need to buy a new flexi since the lever is a low collar or im good?
Hi! If I'm reading this correctly, then you should be fine. The collar does more so with its width and whether it fits inside the arcade stick. It's been a while since I dived into levers though. The Korean one is the biggest circle, so it should be compatible with everything. However, if you want the plexiglass to perfectly match the width of the plastic ring, then getting a Japanese plexiglass from Focus Attack wouldn't hurt, and it's cheap! I hope this helps you.
@@JadedJawnee ty
Sucks this stick has no R3 and L3 button for practice mode
Hi! The default PCB for the Omni indeed has no good R3 or L3, but if you do the Brook UFB Fusion conversion, I did have two of the back buttons for R3 and L3 in practice mode. Then the remaining two I made start and select IIRC. I hope this helps!
Does the knee lever just plug and play in the omni or you need to change some parts ? Thanks
Hi! If you use the old PCB, I'm not sure. Theoretically, if it was the Korean version of PCB, it should be plug-and-play. Before, the person used a Fujin IIRC and didn't have to do anything fancy. If you switch to Brook UFB Fusion, you will need a conversion harness if you use their default FGC cable harness. Cheers!
Did you have to put the art on a digital template?
I used /r/freefightstickart to find a .psd file for my fightstick. www.reddit.com/r/freefightstickart/
If you want to do your own, there's a tutorial here: ruclips.net/video/9emdMGiBVoA/видео.htmlsi=vox_ByscUiY5sjj9
Does focus attacks plexiglass hurt your wrist?
It does not hurt my wrist, thankfully! Despite the edges looking sharp for the plastic, they're okay. I usually wear long sleeves to protect my wrists, but my hands are also small compared to others. A bigger hand wouldn't have an issue!
Hey I have an Etokki Omni Korean Edition and I'm looking to grab the Knee Neo Lever. Do I have to order a JLF Plexi Cut for the lever or is the original Korean Plexi Cut just fine? Thanks in advance! Great Video too
Yo! Thanks for the kind words. Yeah, I think they are still available on www.us.istmall.co.kr/. I used the Korean Plexi Cut (which I had to get cut), but it would work fine with a Japanese Plexiglass. My brain defaulted to "Korean lever warrants Korean Plexiglass," if that makes sense! Basically, you can save your money, haha. One cool thing, though, is with the Korean hole cut-out, you can see the blue light come through the lever hole because the Brook UFB Fusion PCB is close enough (at least where I placed it). It makes it really easy to determine if it's connected or not. 😄
@@JadedJawnee lol I gotcha! Thanks a ton bro. Beautiful Stick!
@@playboyceej613 Thanks for all the kind words, man! I hope your stick turns out well, too. Knee Neo Lever is definitely a game-changer. It's a nice plug-and-play lever; I never needed to adjust it. I guess Knee knows his stuff. 😆
@@JadedJawnee He's the Goat! 😂 Thanks for all the advice! K-Lever 4L!
Hii what di i need to do to fit knee neo on my hori alpha?
Hi! Truthfully, I'm not sure, but I found these two threads: [www.reddit.com/r/fightsticks/comments/166lje8/psa_a_korean_lever_does_not_fit_in_the_hori_alpha/?] and [www.reddit.com/r/fightsticks/comments/prcnau/hori_fighting_stick_alpha_and_korean_lever/?]. You will need a 5-pin .187 to 5-Pin Conversion Harness from Arcade Shock to install any Korean lever into a Japanese arcade stick. I hope this helps!
Did you chose black plexiglass
I chose clear plexiglass so the artwork wouldn't be affected.
@@JadedJawnee thx
meow