LED Lights & Upper Hull - Tracked Amphibious Vehicle Build Ep. 17
HTML-код
- Опубликовано: 28 сен 2024
- Fabricating upper part of the hull and installing LED lights, both front and rear on the tracked amphibious vehicle. Taking my homemade sheet metal bender to the max when bending 1.5 mm sheet and beefing it up in the process to make it work better. Check it all out in the video. Thank you for watching and stay tuned for future episodes!
#donndiy #homemade #trackedvehicle
This video is part of a series of videos, check out the series here: • DRIVELINE TEST! - Trac...
Check out my other videos on my channel page: / donndiy
Soundtrack:
Pomade - Silent Partner (RUclips Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
This video is part of a series of videos, check out the series here:
ruclips.net/p/PLkmF7FAZBzkWdzAxcrnz-WJbzSRyqrSBt
Subscribe for more and check out my other videos on my channel page:
ruclips.net/user/DonnDIY
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
👍👍🎄🎆👍👍
it's getting nicer !!
Brasil love you PART 17 tank you
31:29 top
Im not understanding how you are going to brake to turn with a welded differential . Am I missing something ? Great build and your ingenuity is impeccable ! Subbed and watching eagerly ! 👍❤️
Like many folks here, I get notifications about several channels that I subscribe to here on the RUclipss daily.
Most of them are mildly interesting to me, after all I subscribed to them.
Tonight, I literally squeaked out loud when I noticed this download. It was at this time that I realized how much I appreciate your content. I literally made a noise of excitement that drew the attention of my family and required a mild explanation to diffuse the attention.
I’m an amateur fabricator and I absolutely love this build. Can’t wait to see the first test drive. I hope it is this winter in five feet of snow.
👍👍👍👍👍👍👍👍
😂 Thanks for watching! I hope to make you squeak more!
Да, работа парня конечно завораживает! Всё аккуратно, выверенно, чётко! Молодец!
Молодец парень 👍 !
@@Nikolaevich58 Да, парень - дока!
Да красавчік
Man, it's starting to look mean! I can't wait to see it finished.
Looking good Donn. One thing: One thing at this stage consider adding some weld in torsion axle spindles and arms. NO matter how many supports or gusseting you do those axles will bend eventually. Torsion axles will eliminate that from happening plus the ride quality will be drastically improved. Same way Thiokol snow cats are setup too. They are cheap and will insure long lasting enjoyment. Solid tracked snow cats or Mattracks have never been a comfortable ride. They are very jarring and parts break often.
Sean Fillner Good advice.
@@kevinhornbuckle I love this build I just hate to see bent axles. I have owned solid frame mattracks and see the results of snowcat owners that use a solid axle design. It NEVER works long term. Something will always break or bend no matter how much support you give it. On the mattracks the bogies would explode.
Torsion axle weld on arms are super cheap insurance for this build. I want to see this thing rip!!
this is better than a netflix serie for me... can't wait for friday...!
This guy is a mad man.......talk about taking it to the next level......I love this dude!
Great project. You need to leave a small gap so a radius can form with you sheet metal bender. This will make bends a lot better.
Great tip! Thanks!
nice cybertruck
Donn your fabrication skills are incredible !!!! Great job and thanks for sharing your build 👍
Great work, the car comes to life, i look forward to continuing to build. Rating 5+ 👍
So, as I sit here complete entertained I notice that there are twenty people that give the video a ‘thumbs down’! WTF... it is free entertainment with the added craft! Do you people have black hearts??? Jeeeees
Thanks for Documenting each part build and installation,it looks amazing !
Nice fabricating! Add 20mm welds approx 150mm apart on the the interior cross bracing and sheet metal will make it stronger and quieter. Cheers from California, USA.
Excellent work👍👍👍. Thanks for sharing
you are creative . I am a follower from the Kingdom of Saudi Arabia.
Welcome. I am watching your project from the very beginning, as the saying goes ... hats off ... such a small hint, instead of waving this key in this gienter, put on a butterfly nut and spring washer and you will be able to handle it manually ... waiting for end result, good luck ...
Looks great and sure enjoy seeing your crafty craftsmanship
YOU HAVE A VERY NICE SELECTION OF TOOLS MY FRIEND!
Donn the project is looking good. DIY is always more satisfying than buying. Can't wait to see the finished product!!!
Word! 👊
Really good stuff ... Your mind is working almost as well as Your skill-sets. I was getting very frustrated watching You so much time using a wrench on the Press Brake (metal bender). I was going to make a recommendation, but You beat me to it with the T-Handle. The "Stealth Mudder" is really coming along. Great Job ...
You are so patience, i cannot imagine that i could make that.
Good job. And it's so great to see it getting better view day by day
It looks a good vehicle!
Nice metal sheet bender!
Donn, you are like the free hand plasmanator. This buggy is going to be awesome. Not criticizing it here, I'm just saying that the only thing I would have done is put trailing arm suspension. But that comes with it's own set of problems. Can't wait to see this in the bush. It'll be one hell of a hunting buggy.
Наконец то доработал приспособу для гибки металла. Сделал точь в точь как я себе представлял.
Was just gunna go bed , then this popped up well it’s only 3am lol
Would love you to interview him about that he thinks about your machine
getberget EH ??? Sorry I have no idea what that means.
Mick rose, sorry I commented in the wrong place 😂 sry for the confusion
getberget 🤣👍🏻 wondered why i had no idea 💡 lol
Well Done from Paris !! Excellent meticulous job, I hope that your heavy project will float despite the weights.. I can’t wait to see the 1st practice test in the mud and water.. Hoping your engine will have a huge torque.. Thanks for sharing
Yeah, once I spotted 17 I knew I was watching it. I am three quarters of the way through and I’m already worn out watching you work. This is far more complex than I thought at first. Keep up the great work. I bet you’ll be glad when your done. //ji
If only things went that fast!
As I see it, that Craft is going to be one sweet machine. Continue progress and ignore the naysayers, there not handy at all, well maybe usable as a road bump !!
I like that beast. These fenders, back and front is a just great!😎🍻
When it's finished we'll take a ride in it! 🤘Maybe go fishing or something. 😀
@@DonnDIY I'm waiting this day for sure! :P
Beginning, Those lights are going to be smashed...Later, I see what you did there! Pretty goood! Thank you for these vids
I was hoping someone would say that without watching till the end. But you did good, Daniel san, and watched the whole video before commenting. 👊
Awesome job, looking forward to seeing it move.
ALRIGHT................WHAT WE'VE BEEN WAITING FOR.....another video from Donn!! Excellent work as usual Donn.
Great video! I appreciate the captioning, keep up the good work.
Класс. Ждем продолжения. 👍👍👍👍👍👍
Комментарий в поддержку канала и ролика, а также труда мастера.
That is looking so mean, I love it...
Wonderful. Thank you man.
She's got a face and she looks a little pissed!!! Beautiful job!!
Well, that's one way to bend a square tube! As I scratch my...... Head. It sure does look real mean though! Oughta push plenty of snow. Nice job and you sure can work fast. I know your time editing shortened it from hours and hours of hard work. Enjoyed, thanks.
Looking great sir!!
Awesome work! 👍
Looking really great....This has been a great set of videos.
Блин, чувак, смотреть на то как-ты варишь, доставляет неземное удовольствие.
Я тоже завидую его швам 👍 !
Heavy monster track - mini! Good luck!
Looks like the new Tesla 😁
No far better but its getting bigger every video
@@timjohnson6864 At least this won't be as ugly as the Tesla truck.
But it got somewhat less horse power 😋
I love it. Great job. Greetings from Pennsylvania, USA
einfach nur klasse,Respect
When you started bending front sheet strip, i thought maybe suggest Doon to make handle for bender nut, will be key less bender but Doon overtook me 😁. Nice job, waiting another video.
I always look forward to your builds but having grown up with an Argo amphibious vehicle on the farm I am especially excited about this project!
Very nice work and place
شكرا اخي مجهود اكثر من رائع عمل ممتاز
well, there's nothing to say, it turns out cool.I've been watching your project from the beginning.keep it up, greetings from Russia.
Looking good man.
Svaka čast majstore
Man you got talent
КРАСАВА. Слов нет.
Muy bueno e interesante todo el proceso de fabricación
I really enjoyed watching your work on your RUclips channel good luck 😂 greetings from Indonesia
Outstanding!
Good to see you a'gain! Thanks to video. It's gonna looks like military or Mad Max car! 🎅🏻👍🏻🇫🇮
Waoo eres el mejor ingeniero te felicito impresionante definitivamente el mejor entre los mejores
Looks good hope your doors are big enough to get it out.
Good work👏
Show 👍.
Aqui onde eu moro, só si o cara for rico, pra ter tudo isso de ferramentas.
Tá ficando muito legal
💪🇧🇷👍
Ainda vo pilotar um desse, PARABÉNS 👏👏👏👏👍👍👍👍
That looks so cool, it's really starting to come together. Well done! :)
Thank you!
Nice job Good work ethics
Hienoa työtä. On ilo katsella videoitasi.
superbe travail de tôlerie !!! bravo !!
That's cool, bro!!!
Nerszcie Kurde
Codziennie po szkole patrzyłem kilka razy czy filmik wrzucony A tu jest nareszcie
CyberTruck from Donn!
awesome job my friend
Tá ficando top
Hey Donn is this a new design in stainless? what ever happened to the older one??
It looks just great! can´t wait to see it working. At 1.5 mm thick sheet it must be quite light and much faster in the water.
Your grampa has lived that long BECAUSE he still does things like hauling wood.
Nice job! thanks for uploading this for us.
And I have trouble drawing a straight line...
Free hand plasma cuts. I use a guide and can't do as well!
What percentage of your day do you spend repositioning the camera :)
Also what gas and wire are you using with the MIG? All your welds seem to be effortless and beautiful...
As you go to a thicker metal you have to leave a gap between the bender and the bed equal to the thickness of the part your bending
Монстр "болгарки"!!!
Finally lol always great viewing
Just a thought on your sheet metal bender could you use visgrip pliers in the place of the bolt so u don't have to use a wrench all the time
It looks fantastic thank you so much for sharing. You obviously know what you are doing so can I ask how much the completed vehicle will weigh? Keep the vids coming dude. They're so inspiring.
great cool
Tá ficando show.
Better then the cybertruk
EPIC 👍
the sheet metal Break probably needs some sort of mid-span hinge ... that's going to be a little tougher to sort out
Looks amazing :D
ficou top demais amigo ! Parabéns, ' sou do BRAZIL. '
Сварочных работ много показываешь, а так проект отличный.
bravo et merci........
Eres el mejor
Bravo
32:44 Just a littleeee bit reminds me on Schwimmwagen! :D
30:10 you need to add a rest on the left side from the bottom piece which holds the top piece exactly at 90° (on both sides). This way the work piece got no leverage on the nut which secures to top piece to tilt in backwards.
When you get the mill up and running you can make better benders like some of the industrial ones
I hope so. A more dedicated and beefier bender for future usage would be pretty nice.
Hi, having used industrial units, consider making pivot point adjustable, or more specifically top clamp position relative to pivot point, based on metal thickness, this alows better, neater folds, not that hard to achieve but well worth the extra work, keep up the good work
Wow coooooooooooooool
hm.. i just realized how odd the actual shape of the hull looks, its like a really squashed T, turned into some long, beetle-like shape, with like.. 4 little.. i guess 'legs', for those 4 main wheels xD aside that, its really, really nice xD
Don't worry. Next movie... Batman is going to hire his vehicle.