I think the bus to bus sends are awesome, but typically for a reverb I would have an aux return channel receiving that bus as an input and then route the aux channel back into whichever bus I am needing to hear it in. At least thats how I have always done it?
After updating to 3.0.4 im facing in my dante continues im getting glitching ,cracks sound all the settings are properly i checked everything still the problem is same in latency tab im getting red bars as i start DVS before it was working very well after updating this problem came So are you facing same issue? Thanks in advance
I think making the matrices basically additional buses is what other people aren’t talking about enough. 24 stereo buses and 4 main mixes is insane!
I think the bus to bus sends are awesome, but typically for a reverb I would have an aux return channel receiving that bus as an input and then route the aux channel back into whichever bus I am needing to hear it in. At least thats how I have always done it?
You can do it both ways. I need to save the extra channels so I don’t use a channel to do it.
After updating to 3.0.4 im facing in my dante continues im getting glitching ,cracks sound all the settings are properly i checked everything still the problem is same in latency tab im getting red bars as i start DVS before it was working very well after updating this problem came
So are you facing same issue?
Thanks in advance
this would be important information since i am also running a dante setup
Have you made sure your Dante card frimware is updated to the latest ver? I had to update my card to get it to work correctly.
@@AllenPendleton yes it on latest update