ESP32 Pen/Laser Controller v3.0
HTML-код
- Опубликовано: 11 сен 2024
- ESP32 Pen/Laser Controller v3.0
1- 2Axis (A4988 or DRV8825 Drives)
2- Power Module MP1584EN 3A or Mini-360 HM 1.8A (MP2307DN) as DC to DC Step Down Convertor
3- 2x12v and 2x5v Output
4- 12v , 5v , 3.3v , Gnd Test Point
5- Reverse Protection for ESP32 and Input Voltage
6- 3 Pin Laser Controller with 5v PWM for Laser Engraver
7- Micro servo Controller for pen Plotter
8- Limit switch for X and Y axis
9- MicroSD Support
10- Control Button Support (Hold , Resume and Restart)
11- Small size (72*63.5 mm)
12- Support ESP32 Dev kit C and NodeMCU-32S
13- ESP32 can be control by USB , Bluetooth , WIFI (WIFI to virtual com port on PC) , WIFI Telnet Control By PC or Smartphone , WIFI Server with built-in APP (PC , Tablet and smartphone support) , Smartphone App controller
14- Run gcode directly from SD card without PC or smartphone (After selecting and sending to SD card to start)
15- power supply 12v (VMot & Laser Input voltage are shared and lasers support 12v input only)
16- All control bottoms can be re-configured for run gcode file from MicroSD (totally 4 files)
17- Board can control Laser and Servo at the same time
18- Firmware FluidNC (github.com/bdr...)
Where to get a printed circuit board?
This is a homemade board and will be share later ...