I just installed this too. Did you notice how if you put your 4-ways on then turn the ignition off the blinking goes completely off to on, but when the ignition is on the running light remains on so there’s not a complete blinking of the light? Initially I thought it was a BCM learning issue, but according to a tech at Custom Dynamics it’s because that’s how Harley wired it for the running light to stay on. I’d prefer they do a complete blink on, blink off. I’m searching to see if anyone has a way to make it do that. What’s your opinion?
@@Propman203 No I never found a solution to that issue. I sold that bike. On my new bike (well new to me) I’m doing the saddle bag lights that mount just under the lid. I thought about doing the filler lights again, but decided to go with a higher mounted light.
@@garyturnage7856 Hi, you can search for “B0B68GX292” on Amazon. Warm Tip: Our product (B0B68GX292) is sold as a matching set, there is no separate selling link.
@@richvandenbroeke5493 Hi, we're not sure exactly what you need, but our products are sold in kits and there are no individual sales links. If you just need the side box taillight (please make sure it fits your motorcycle before purchase), here is the link for your reference: www.amazon.com/dp/B0B3CQQQRS
I have similar lights, but it works weird, when I hit brakes - it turn yellow instead of brighter red. turn signals works as expected (yellow). Maybe someone can give some advice what could be wrong?
@@ContrastVision Hello, we recommend that you prioritize checking the detailed description page of the purchase link to see if it matches the condition you are currently experiencing. If it does not match, then you will need to check that the wiring harness connections are correct. (VEISUTOR recommends that you prioritize checking that the lights come on correctly after a successful installation before restoring the motorcycle to its original state)
Hello, thank you for your interest in our products, but this part is not sold separately, it is sold as a kit with the rear fenders in this video, you can go to Amazon for more details! www.amazon.com/dp/B0B68GX292
Hello! I bought a similar product but did not have the license plate with turn signal eliminator as shown in this video. You will need to get something like the Custom Dynamics Turn Signal Eliminator Kit. I wish I would've seen this video before I made my purchase as it has everything you need.
Hello, thank you for your interest in our products. The amazon link is www.amazon.com/dp/B0B68GX292 . Currently we only sell through Amazon. If you have other products want to buy, please visit the Amazon store. www.amazon.com/stores/page/E3A3DB28-DD59-428B-B4EC-B4E933061C51?ingress=2&visitId=ee8f48fd-c67a-42a5-bdd3-eeff0e475b0f&ref_=ast_bln
I bought one of these and fender fasiac pads all broke after first ride had to remove and build my own with j b weld plastic repair and fiberglass cloth cheap cheap cheap don’t buy no where to return it not satisfied
Nice work 👏 👌 👍
I just installed this too. Did you notice how if you put your 4-ways on then turn the ignition off the blinking goes completely off to on, but when the ignition is on the running light remains on so there’s not a complete blinking of the light? Initially I thought it was a BCM learning issue, but according to a tech at Custom Dynamics it’s because that’s how Harley wired it for the running light to stay on. I’d prefer they do a complete blink on, blink off. I’m searching to see if anyone has a way to make it do that. What’s your opinion?
Did you ever find these
@@Propman203 No I never found a solution to that issue. I sold that bike. On my new bike (well new to me) I’m doing the saddle bag lights that mount just under the lid. I thought about doing the filler lights again, but decided to go with a higher mounted light.
How to fit this kit with tail light on fender?
I plugged mine into the tail lights, and lights didn’t come on. Where does the other plug go to?
@@garyturnage7856 Hello, the other plug is directly under the seat of the motorcycle.
And where do the plugs from the light bar go?
@@garyturnage7856 Hello, we need you to describe exactly which light bar plug it is.
Where did you get the license plate light from?
@@garyturnage7856 Hi, you can search for “B0B68GX292” on Amazon.
Warm Tip: Our product (B0B68GX292) is sold as a matching set, there is no separate selling link.
Where can I get that mount with the light in it and holds the license plate bracket?
Here is the link to the item for your reference: www.amazon.com/dp/B0B68GX292
@@veisutor4366I’m needing just the license plate lamp
@@richvandenbroeke5493 Hi, we're not sure exactly what you need, but our products are sold in kits and there are no individual sales links. If you just need the side box taillight (please make sure it fits your motorcycle before purchase), here is the link for your reference: www.amazon.com/dp/B0B3CQQQRS
Yeah where are these available
Hello, you can click on this link to purchase: www.amazon.com/dp/B0B68GX292
I have similar lights, but it works weird, when I hit brakes - it turn yellow instead of brighter red. turn signals works as expected (yellow). Maybe someone can give some advice what could be wrong?
@@ContrastVision Hello, we recommend that you prioritize checking the detailed description page of the purchase link to see if it matches the condition you are currently experiencing. If it does not match, then you will need to check that the wiring harness connections are correct. (VEISUTOR recommends that you prioritize checking that the lights come on correctly after a successful installation before restoring the motorcycle to its original state)
How are you?
I need this part of the license plate lighting, where are you moving at minute 2:20, do you know where I can find it? thanks.
Hello, thank you for your interest in our products, but this part is not sold separately, it is sold as a kit with the rear fenders in this video, you can go to Amazon for more details! www.amazon.com/dp/B0B68GX292
Hello! I bought a similar product but did not have the license plate with turn signal eliminator as shown in this video. You will need to get something like the Custom Dynamics Turn Signal Eliminator Kit. I wish I would've seen this video before I made my purchase as it has everything you need.
@@HekSG Do you know where I can find it?
Where is this kit sold
Sorry for the late reply,😿 it‘s available now at www.amazon.com/dp/B0B68GX292
I'm looking to order a Pacific part. What is your email address?
Hello, thank you for your interest in our products. The amazon link is www.amazon.com/dp/B0B68GX292 . Currently we only sell through Amazon. If you have other products want to buy, please visit the Amazon store. www.amazon.com/stores/page/E3A3DB28-DD59-428B-B4EC-B4E933061C51?ingress=2&visitId=ee8f48fd-c67a-42a5-bdd3-eeff0e475b0f&ref_=ast_bln
I bought one of these and fender fasiac pads all broke after first ride had to remove and build my own with j b weld plastic repair and fiberglass cloth cheap cheap cheap don’t buy no where to return it not satisfied
Hello, if you buy goods from Amazon, you can contact us through Amazon, we will promptly deal with after-sales problems for you!
Sorry but you took way too much stuff off, I didn’t even take the fender off it was easy.