You suupose to align that green line at the end of tape to in-between arrows. That's what that's for .... I saw your old video applying 13 pro max and you did it wrong and you did it wrong again! lmao.
Those tiny little bubbles don’t bother me but the fact that it’s not perfectly aligned vertically would drive my OCD crazy. Lol definitely a little bit too much to the left. Which is surprising considering it comes with the tray.
I’m not sure how he messed it up. It’s extremely easy to get it right. Regardless if you’re not confident in doing it yourself, the Apple Store can apply them for you
This is the one I got and it was super easy to install. I got the little bubbles out with the microfiber cloth and a little elbow grease. So smooth to use but quite expensive.
How is the fromt camera quality? Do you see a drop in the quality vs before the installation? Previously the screen protector would never go over the camera , I dont get why its ok to do it now
How is the fromt camera quality? Do you see a drop in the quality vs before the installation? Previously the screen protector would never go over the camera , I dont get why its ok to do it now
@@icw-internetclipsworldwide121 I used the camera before and after putting the screen protector on and didn't notice a difference. The screen protector is very clear and doesn't affect camera quality.
A little hack to get the bubbles out, lift your fingernail slightly underneath the screen protector and raise it up where the bubbles are. When you lower it back down it settles with the bubbles gone!
2 года назад+3
This is the Best screen protector ever! No hole, just perfect!
I returned my Belkin Ultra Glass and have now purchased the Spigen EZ Fit The alignment of the Belkin wasn’t perfect and I could not get a bubble out of the bottom even though there was no dust particles.
I agree, also you have a piece of protectector over your front facing camera lens, for sure this drops the quality, otherwise why do notched phones dont use that design?
@@SlyCooperRN no I think they are saying that it doesn’t fit the screen to the edges. I went to the Apple Store and even when the apply the screen protector it doesn’t fill the screen all the way cause of the speaker cut out
How can you evaluate a screen protector and give it an honest review, without subjecting the screen to some abuse? I mean to see if it protects the screen as claimed… 🤷🏻♂️🙄
Yeah I can confirm that. I got applied Belkin UltraGlass on my 14 pro max at Apple Store first day, and 2 months later I switched to spigen glastr ezfit. It is more reflective and greyish under light when screen is off. Not true black. I switched to Belkin again. Better oleophobic coating and glass quality.
@@bahadrcandemir4955 hey, I’m torn between the belkin ultra glass and spigen EZFit for the iPhone 14 pro max. What would you recommend, considering I’ll be using a spigen slim armor case for the same
You suupose to align that green line at the end of tape to in-between arrows. That's what that's for .... I saw your old video applying 13 pro max and you did it wrong and you did it wrong again! lmao.
Those tiny little bubbles don’t bother me but the fact that it’s not perfectly aligned vertically would drive my OCD crazy. Lol definitely a little bit too much to the left. Which is surprising considering it comes with the tray.
It's extremely easy to make sure it's not off center when you're doing it yourself. I work at a store and put lots of screen protectors on
I’m not sure how he messed it up. It’s extremely easy to get it right. Regardless if you’re not confident in doing it yourself, the Apple Store can apply them for you
This is the one I got and it was super easy to install. I got the little bubbles out with the microfiber cloth and a little elbow grease. So smooth to use but quite expensive.
How is the fromt camera quality? Do you see a drop in the quality vs before the installation? Previously the screen protector would never go over the camera , I dont get why its ok to do it now
How is the fromt camera quality? Do you see a drop in the quality vs before the installation? Previously the screen protector would never go over the camera , I dont get why its ok to do it now
@@icw-internetclipsworldwide121 I used the camera before and after putting the screen protector on and didn't notice a difference. The screen protector is very clear and doesn't affect camera quality.
5:35 You or the alignment tool completly messed up. Just look at the gap on the right side of the phone...
Which is better spigen screen protector or belkins’?
A little hack to get the bubbles out, lift your fingernail slightly underneath the screen protector and raise it up where the bubbles are. When you lower it back down it settles with the bubbles gone!
This is the Best screen protector ever! No hole, just perfect!
edge to edge ? there was a big gap down the right and a bit crooked
I returned my Belkin Ultra Glass and have now purchased the Spigen EZ Fit
The alignment of the Belkin wasn’t perfect and I could not get a bubble out of the bottom even though there was no dust particles.
Good to know you were able to return it even after you applied it.
@@4viz lol
I’ve got the space black iPhone 14 Pro five and a 12 GB it’s amazing and I’ve just got this exact screen protector
I think the warranty is the most important part it’s worth it in the long run
How does the warranty work? Do you automatically qualify once you buy the screen protector? Thanks!
Hi @Big Unbox, can I use belkin iPhone 14 pro Ultra Glass screen protector for iPhone 14? Will it perfect fit with iPhone 14?
Would i choose Belkin or rather the Spigen one.. Can you help me please ?
spigen, its cheaper and comes with 2 with easy installation
@@not_amand but does it protect the screen as much as the Belkin?
@@hooligan5928 id say yes, i had the belkin on my old xr and it cracked. when i switched to spigen it held up longer
so it's normal to have that 1mm up top that's not actually covered?
Is it hard tho because I’m new to doing it myself but tho
Doesn't the pill at the top need a cutout? Or is there no longer an earpiece grille up there to hear calls?
the grill is still at the edge on top and the pill where fingers need to touch so they covered it to prevent from scratching
I agree, also you have a piece of protectector over your front facing camera lens, for sure this drops the quality, otherwise why do notched phones dont use that design?
Does the protector impact the functionality? Does it cover the grill? Can you still hear calls and so on? Thank you!
Does it reduce the front camera quality?
Debistes haber tenido el IPhone apagado en el proceso 🙄
Can anyone tell me if the quality of the camera drops after installing ?
It doesn’t it’s fine.
No camera cutout?
Thank you for your review
It’s not lined perfect with the edges!
That’s why I got mine installed at the Apple Store. They do it for you and it comes out perfect every time!
@@SlyCooperRN no I think they are saying that it doesn’t fit the screen to the edges. I went to the Apple Store and even when the apply the screen protector it doesn’t fill the screen all the way cause of the speaker cut out
@@RollerCoasterPsycho nah it’s not lined up perfect it was more to one side
yeah just like his other belkin installation vidoes. it's so annoying
Lol
It doesn’t perform well under cold weather
How can you evaluate a screen protector and give it an honest review, without subjecting the screen to some abuse? I mean to see if it protects the screen as claimed… 🤷🏻♂️🙄
Says it’s edge to edge perfectly like no…. It’s Crooked as heck 😂
someone said the spigen is more reflective than the belkin. can you confirm if this is true?
I would say that could be slightly true. Not sure it's that noticeable. If it bothers you, go with the belkin for sure
Yeah I can confirm that. I got applied Belkin UltraGlass on my 14 pro max at Apple Store first day, and 2 months later I switched to spigen glastr ezfit. It is more reflective and greyish under light when screen is off. Not true black. I switched to Belkin again. Better oleophobic coating and glass quality.
@@bahadrcandemir4955 why did you switch to spigen in the first place?
@@minhazahmed9753 just curiosity. the result was just a waste of money for me. I can also recommend PanzerGlass as a top segment product.
@@bahadrcandemir4955 hey, I’m torn between the belkin ultra glass and spigen EZFit for the iPhone 14 pro max. What would you recommend, considering I’ll be using a spigen slim armor case for the same
What was that $15 one you were referring to?
Spigen tempered glass is a 2 pack under $20
Beautiful
Is not full edge to edge ! You can clearly see that is not until edge especially upper side
Uff a litel bad the instalation, but its ok perfectly
review starts at 6:03 😴
these are not edge to edge
This thing was 5 dollars at ross
Not a fan of the protector covering the fron facing camera tbh. It will affect quality ever so slightly.
Am I the only one that misses the clear films sold at the Apple Store?
No, I am also missing those films. Especially the anti glare film :(
I’d forgotten all about those…circa 2013
It’s a miss. I threw it away
Anyone experience like a blue/gray tint on certain angles when applied on screen? Iphone 14 pro max thanks
$40 forr only one is too much.
there are other better products than this.... and cheaper
Worst installation 😂😂😂😂
I do parachute reviews but I’ve never Been skydiving. But I recommend a lot of them.
worst apply ever
$2 screen protectors does same job.
No it doesn’t.
So 2000% better? Doubt it!
Ma che è sta schifezza? È totalmente decentrata 🤣