Ryan my grandfather is in the hospital recovering from a collapsed lung I can't see him cause of Rona it would make my day if you pinned me or replied or both
Love all the content and actually really enjoyed seeing some ladies in the video from yesterday but with all the trucks to put together I have to say Brian's white Chevy is the nicest of then ALL!!!!!
Just found your channel. I dig it man. I’m trying to teach my 13y/o blue collar work is the way to go. I’m on your website now ordering him a shirt and some stickers for his dirt bike.
The dude with the square bodies and not being afraid to have fun needs to hang out with you all more often I about fell out on my chair laughing when he tried to do a 4wd burnout
Rear is putting ingredients pressure on the trans. He needs to redo the rear drop and correct the distance issue or it will happen again or be the trans housing itself next time.
When you lower the truck the distance between the driveshaft gets smaller That’s why he busted the tail shaft He needs to shorten the drive shaft so there’s room for it to slide in and out on the rail shaft
Dam to square bodys dropped street truck and lifted offroader dam got the best of both worlds sbc or ls always the way to go need to get th400 for street truck
That K10 is the best out of all of them. Crazy how old school is still better than the new trucks. My truck couldn't do that ramp like that old beast 💪! And Kris is the new alpha male. He makes all you do is look like bitches! I love it!
Straight axles will always have more flexibility then the ifs that being said my k20 has 12 leaf springs in the rear and 5 up front so it won't flex like that. 😂
Buddy needs to shorten his drive shaft you fellers probably already got that figured out slip yolk was binding causing vibration also might need to play with the pinion angle
TlntdYungBulls Entertainment when you have a slip yoke on one side and straps on the other side all you have to do is remove the straps and the drive shaft comes out
loll yeah must be the tail shaft that is not strong enough..... sounds like its time to fucking rebuild the transmission. Jack of all trades master of none....
C10 needs to appear more often, love that truck
Bro hell yeah it’s bad ass
Ryan my grandfather is in the hospital recovering from a collapsed lung I can't see him cause of Rona it would make my day if you pinned me or replied or both
James Vlogs hope he gets better!
@@DMAXRYNO thank you
For sure bro... god got him you will get through this
Glad to see the proper tool used for the job ! From towing trikes to sparks by leaking fuel tanks!! Love it
I would love to see a Squarebody Sema build that would be a gift from God
Always nice to see squarebody content... I am getting alot of squarebody stuff done
Seeing Wes and this guy make me want to join the Navy, looks like they have all the cool stuff haha
Tigre64 there’s a million more things you could do to make three times the money they do. Be creative.
The video should've been called " two trikes one truck."
I wonder what the neighbors say lol, great content always looking forward for these videos.
That blue truck owners “southern accent” goes in and out a lot 😂😂😂
Best video yet, glad you have a friend with some square body Chevy's......
That dude does not give a rat's ass lol🤟🤟
Love all the content and actually really enjoyed seeing some ladies in the video from yesterday but with all the trucks to put together I have to say Brian's white Chevy is the nicest of then ALL!!!!!
Man you guys have a good time keep up the good work guys💯👊🏻😎
Like the red powder coated lift on Wes truck.
Just found your channel. I dig it man. I’m trying to teach my 13y/o blue collar work is the way to go. I’m on your website now ordering him a shirt and some stickers for his dirt bike.
Awesome loved the square bodies 🔥🔥👍🏽
Ryan thanks for the picture of your truck signed by you. And I put the workforit decal on my truck today.
The dude with the square bodies and not being afraid to have fun needs to hang out with you all more often I about fell out on my chair laughing when he tried to do a 4wd burnout
I seen the first work for it decal the other day in Wisconsin! Its really amazing how many people from all over the place watch the same channels
Where at in Wisconsin man?? Im in Northern WI and im rocking one on my 2015 Ram Mega cab
@@Cummins2519 I'm pretty sure I was in neenah
Such a great video love that K 20 I love how the video well little bit random pretty much with all the burnouts and stuff
That was super fun 👍 👍 👍 💪
Nothing better then a squarebody
I am putting a 4 speed in my k5 blazer with a 454...also doing a budget k5 build and fixing up a 73 k5.
Solid axles gotta love them
Square body shows all you new fandango fancy trucks up right there square bodies for the win
That truck is clean as hell on the undercarriage. I expected to see alot of surface rust.
That's my dream truck the old Chevy 4x4
Look at all those clean brand new tow straps.....
Typical Florida Man 😎💪😂
Love the videos man. Keep up the good work
Seen a liftgator ad with the first truck showing a workforit decal loud and proud in the back window. Check the company out.
Solid front axle of course.
Whew... nothing like a 84' K20, with a granny gear and 4:11s 😁
Rear is putting ingredients pressure on the trans. He needs to redo the rear drop and correct the distance issue or it will happen again or be the trans housing itself next time.
neighbors have to love everyone of you , lol
This video was so funny he should be more in the videos the one in that one that was fixing the c10
SQUARE BODY 👍👍👍👍
hey wes how did that go??...steak sauce!!!! 😂😂😂😂😂😂
Hey Ryno, who manufactures those trikes? I need 1 of those!
I wouldn’t expect Chris to own any sunglasses other than spys… they fit his persona perfectly hahahaha
Bro I love train horn videos are you doing any more videos for train horns?
im from new jersey and behind a ram with ur workforit decal on the back window
Spit on it was the best part
Can’t believe those trikes pulled it lmao 💪💪💪
Bro I love how u pulled the c10😂😂
And square bodies back when GM built good trucks
I love my squarebodies... But would not buy a new chevy
You got me at squarebody💓
If you keep shearing tail shaft housings you need to verify that your driveshaft is not too long or that you got a binding u joint.
When you lower the truck the distance between the driveshaft gets smaller
That’s why he busted the tail shaft
He needs to shorten the drive shaft so there’s room for it to slide in and out on the rail shaft
I own K20 with a 5.7 GM smallblock.
you should put your obs on the flex ramp
"take a sip and pass it on" hahahahaha
Do you know when you'll be back in stock on hats, and accessories? No mesh hats or keychains, and lanyards?
MY LEGS ARE SMALL BUT THEY'RE MIGHTY! 😂😂😂
Bryant looking like he packin on a couple lbs lololll
Chris’s farmers tan though....
Ryan let him know I did that same thing to 2 transmissions it’s his pinion angle that caused that
Love then old chevys I need one so bad
I need to get a 700r4 transmission 2wd for my 89 Chevy Silverado 1500
700r4's are decent transmission's heck I have one in my truck lol
Driveshafts love to bind up after a drop like that.
I have the connection on the Life guard tower that’s my temporary occupation
Dam to square bodys dropped street truck and lifted offroader dam got the best of both worlds sbc or ls always the way to go need to get th400 for street truck
josh shelby she’s getting a LS and a 4l80e
That K10 is the best out of all of them. Crazy how old school is still better than the new trucks. My truck couldn't do that ramp like that old beast 💪! And Kris is the new alpha male. He makes all you do is look like bitches! I love it!
Guy's, not do. Lol.
One day I WILL be the person who says roll the outro😂
I’m looking for a video where you talk about the trikes. Can somebody point me there? Thanks.
Wow, has Chris been working out? I didn’t even recognize him!! 😂 must be the beard. I thought it was a teacher form my school lmao
How many of Yall are Florida boys?? I thought Wes was but who else?
3 views, 14 likes and 3 comments RUclips having a moment again
Funny awkward pause after "just the tip". Lol.
Straight axles will always have more flexibility then the ifs that being said my k20 has 12 leaf springs in the rear and 5 up front so it won't flex like that. 😂
I have a lb7 duramax with allison trans complete harness and computers for sale if he wants to duramax swap that c10
Yes yes k20
god damn it i need to watch the whole video before i start commenting... i have a nv4500 ill sell out of montana
All that slack in the output shaft! Probably should pull that and rebuild it. More problems than just a busted tail housing.
What are the name of the bikes?
now that's a way to end a video burning rubber while leaving!
Just did the same repair on my obs 😭
Yo ryno yee yeee
Bruh I need one of those toys ... what are they called
Buddy needs to shorten his drive shaft you fellers probably already got that figured out slip yolk was binding causing vibration also might need to play with the pinion angle
Never mind should have finished the vid
You still havent given your nephew the power wheel yet. You sure it wasnt for you to play around with lol
I've been waiting for some grave digger content lol
Man I love me a square body
I have 4 squarebodies on my channel
WAIT, YALL DEADASS TRIED TAKING THE SHAFT OFF WITH THE JOINTS STILL CONNECTED?????😂😂😂 WTF
TlntdYungBulls Entertainment when you have a slip yoke on one side and straps on the other side all you have to do is remove the straps and the drive shaft comes out
loll yeah must be the tail shaft that is not strong enough..... sounds like its time to fucking rebuild the transmission. Jack of all trades master of none....
maybe new u joints?
nah just replace whats broken.....
Lol you guys should all go break a tap off in something and figure out how to remove it.........
maybe grab the tail shaft and wiggle it see how much play
951🤘
2
Do you even do construction anymore...?
What is Chris diet. I want to know
Duramax swap!!!
The K20 is BAD!!!
Que the limp biscuit
Just imagine what WhistlinDiesel would do to that k20 lol
I regret selling my 82
Square body dude is gives me weird vibes
Second
First
last
Quit saying good morning its NEVER morning when you post make new intro and outtro PLEASE
Bobby Woods IT’S MORNING WHEN I’M FILMING
Second
First