Darn...when I was a young boy I wanted to create something like this after a very complicated scematic and it never worked of course, lol...now you only use a few items to achieve the effect, well done!
I tried this out but it's not working. I flipped both the BC547 and the mic (pos & neg) but still nothing. If I supply direct power, the led comes on but not with the BC547 and 100k resistor connected. Any ideas? Thanks.
Olá tudo bem Poderia me dizer as cores do resistor não consegui ver direito não sei se a terceira cor é amarelo ou verde por favor se puder me passar as cores do resistor. Obrigado...
Sir ic transistor bar bar blast ho raha he 12v dc 2 amp supply Same circuit inmaking by me Same 2 bar transistor phat chuka he 3-4 min chalta he sahi fir khatm Kya karu
Hope you guys will like it.
Don't forget to subscribe for supporting my Hard work.
Visit: circuitbest.com/simple-basic-audio-amplifier/
Doesn't work
Hello. If I connect an electromagnet instead the led will be sound reactive? I want to make a ferrofluid visualizer without use arduino .
Darn...when I was a young boy I wanted to create something like this after a very complicated scematic and it never worked of course, lol...now you only use a few items to achieve the effect, well done!
Nice project... 100% working.. thanks
I liked the video editing with 3D text, and i stayed for the electrical engineering tips! Thank you!
Thánh Tháo Chào các bạn! Video hay quá
Instead of the mic, would it work if i just connect directly those + & - ends to the audio source via audio plugs?
Cool, merci pour tout ces montages sympas et faciles à réaliser. 😉
I put Like because you have greatly improved the videos.
Thank you so much for your support!!
Muito bom 👍👈 sucesso aí família 🤝
Great video thanks again. where can you get a condenser mic?
Hi, it was great, I want to increase the LED light or the voltage output is higher, what can I do?
I think resistance value have to reduce
Mic discription Mai nhi ha
O bc 547 pode ser substituido pelo
IRFZ 44N???não entendi a descrição!!!!
sim, certifique-se de conectar os pinos corretamente.
Thnk y'u. If I change the Input to 3.7v, how much resistor should it be? and what has been replaced ?.
Not sure but 10k to 50k i think 😁
Em vez de led pode ser um relé?
Bro ham 4 led ko bhi transistor se chla sakte hai 🤔🤔
Sirve de leve para gravar poniéndole a cada diodo su resistencia correspondiente y su potenciómetro para regularlo,,?
Nice one.... How many led we can connect ?
I tried this out but it's not working. I flipped both the BC547 and the mic (pos & neg) but still nothing. If I supply direct power, the led comes on but not with the BC547 and 100k resistor connected. Any ideas? Thanks.
It doesn't work
Can we use 9v battery as power source
yes obviously
Use smart ! Top
Please tell me how to use 3.7v which resister need to me
si reemplazo los led por unos focos bajo consumo, que resistencia tendria que ponerle?
Damian Baez si que Resistencia tengo la misma duda.
Let's say if I have 2 led .then I want them to work alternatively that is when one is on other is off. Can u pls help
nice project working good
can i use 10k or 330 ohm resistor
Would this work with a vibration motor?
Yup
Now, do it with a powered strrobe light.
Just add Powerful MOSFET and high power LED with CV CC and Heatsink :-)
I would like to use less input voltage. So can I change to resistance of 100k resistor to lesser and simultaneously decreasing the input voltage?
you can
@@Creativecreator Thanks for your reply...🤗
May I know what should be the resistor's value if I give 4v as input?
4 V is one ghiff of 12v. So just divide 100k anx you get about 33k redistor.
Sorry. One third 1/3.
wired earphones ka mic use kra mene
work nahi kar rha ye project
help me
Which soldering iron do u use
check description
Can i use 12v led strip light?
I have made a seperate video on this topic please see that
Este proyecto está genial pero tengo una pregunta puedo usar una fuente 12V cualquier
Yes
If we change mic with stereo jack and will put in phone headphone it will work ?
What other transistors can I use??
How can I adjust the microphone sensitivity?
How i get this transister
can I use different color of led?
Крутой ролик не встречал такого на ютубе
why green light ?does it work with other colors? thank sir
Está re piola wacho! Cool men!
Nice reactive LED
Where I can buy this microphone
Simple Idea, get yourself an earphone and get the MIC from there.
NICE
I hope that. You will progress through it
Hello, what is the watts of the resistors you used?
How output 5V?
Please
Buenas noches una pregunta porque 12 vols en vez de 9 vols
can this work without resistor i will give 5 volt
Can i use 900 ohm mic
Not working with 9v battery output
can i use a 9 volt power supply? If so what resistor do I need to use?
Use any resistor between 50k to 200k it will work
ich hätte ein Darlington Transistor genommen der wird viel empfindlicher
Good mas bro
Can i change it with rgb led?
Hacate Lite yes.
can i use 1k resistor instead of 100k
it will not work buddy with 1k
Nice
Can I use 100 ohm instead of 100 k
Bro can I use HW 9v battery instead of 12v?
Yes you can 😀
@@Creativecreator thanks for the information 😊😊
Good
Is this 12 voltage
Nice bro
Thanks sir!
¿Es lo mismo que bc546?
Olá tudo bem
Poderia me dizer as cores do resistor não consegui ver direito não sei se a terceira cor é amarelo ou verde por favor se puder me passar as cores do resistor.
Obrigado...
100k Resistor
Hi, can you show how to make a metal detector so solder
When using 9v battery it didnt work is there any other way
or am I done anything wrong
Can we supply power with 9v battery?
Yes
下次可以做 用音樂啟動的版本
Voltage ?
Is it really work
no
It only sence loud sounds , can u suggest any option to increase its sensitivity
Use microcontroller check my video
Music Reactive LED strip with Arduino
Inteligente
Can we use head phone's mic..😅
Yes why not
Bro can we use 10k ohm instead of 100k ohm please tell
No because 10k resistor will turn on the transistor without mic so mic is used to push a signal to the base which turns on the transistor
is work 3.7v dc
Интересное приспособление
How to use 3.7v
What is the voltage you are applying
12v
Can we connect 12-0-12 transformer as dc output will be more than 15
Bhai meri led to bina sound ke jal rhi h band hi nhi ho rhi kaise thik kru isko
Same yrrr aisa lgta hai ye log chutiya bna rahe hai
Can i use 100kohms insent of 100k
those are the same buddy. you can use
Thanks buddy
Buddy i subscribe and hit the bell icon full support
Sir ic transistor bar bar blast ho raha he
12v dc 2 amp supply
Same circuit inmaking by me
Same
2 bar transistor phat chuka he
3-4 min chalta he sahi fir khatm
Kya karu
THANK YOU
Bro i have one doubt bro
Please tell I should try to explain 😌
@@Creativecreator sir i have do it in same circuit but it's not working
@@ranjithm5268 it will work check the Transistor first then the mic u are using. Mic has polarity so you should connect in right polarity.
@@Creativecreator can we use headset mic bro
The led is constantly on, what did I do wrong?
Guaaauuu genial
that's great
Thanks
It will be run on 5v
5:04 the circuit
please use capacitors with this.
Excelente!!!
Pls send me how to make wireless music reactive with mic not through mobile
Mic is not positive and negative. Two pins are same direction
I just googled it
Bro use 12 volt led strip
Cool) Like)
Não tenho muita noção de eletronica
Não é um problema, vou ajudá-lo a aprender
Hindouu is chieeét
kemah
Is this working anyone replay plz
Yup
Нах? 🙄