my opinion (if that's worth anything) is to let George decide what he wants rocky to be like. his love for that car is so real and so entertaining to watch!! you can tell he wants this rig to be something special. he's such a good addition to your team and he's the most fun person on this Chanel to me. make the guy happy 😃
Most of the problems have been the tuning not being able to things under control. I think we all still want to know what this combo can do consistently.
@@dochaze1 I disagree. While it is great to be consistent and win, There are also things to learn for everyone along the way for the team and the fans. Be thankful they are sharing. Who wouldn't want to follow George's decisions and follow him for every step of this wins or losses.....
My vote goes to whatever George wants! His love for his rig is so fun to watch, and we can feel his heartache everytime something goes wrong. I think I speak for many that we want George to pull some W's this season
I truthfully don’t care if he tears it up so many times they end up building a jig and put prebuilt bolt in front clips on it aslong as it stays how he wants it and is happy
Im kinda done with george and breaking everything he gets in you know ? Dont get me wrong, must be fun and all but for the averge viewer ? He steps in, car breaks, needs fixing again.
@@firefly2472 crazy idea, but make the blazer electric. has all the space for it. it will make it heavy enough he cant launch it to the moon, and seeing electric drag suv would be unique
yeah this is exactly the same thing i said! George is a huge reason why i love this channel so much as his energy and emotions are so pure and warranted that i only want whatever makes him happy!
Cleetus and James treat George like a 2nd class citizen...much like James May in Top Gear. It sucks. They don't care about his feelings at all. He should refuse to help in any engine swap...that would be rubbing salt into the wound 😡
Coyotes fucking suck. Why put a heavy giant engine in the small engine compartment of a blazer... Gen 1 sbc based off a bowtie block would be a much better option.
Rather not see Ruby go slower but if it's just for this race until her engine is done then go for it, it'll make for some cool videos with all the noises at least. Rocky should have been front mount ProCharger right from the start, make it happen because you guys need something in the fleet with that combo
Assuming they run the small blower pulley, I doubt it'll be much slower than single -turbski Ruby. That blower LS is no joke, and it'll have instant torque
@@halofreak1990 Except you're not factoring in Ruby's Powerglide instead of the extra gearing Rocky's 400 has. But, a better balanced chassis and areo might overcome that as long as the engine can spin the RPM it's going to be crossing the towers at.
I thought the same but to be fair how many events have we watched where they were not even pushing Ruby and just aiming for 8.50s? Probably wouldn't be a big difference tbh
I'd hate to see the blower leave the blazer, but it would bo cool in Ruby, but maybe - Big Blocky Rocky?? Y'all are steamin' on McFlurry! That is an impressive build! I was really surprised about all of the features of the Haltech system too, super neat! Definitely looking forward to Sick Week!
Yeah the Haltech is phenomenal, arguably the best ecu on the market, u can literally run everything on 1 box unlike other brands where u need multiple boxs to run everything. I'd love to go nexus in my dirty old Commodore but it's way put a my budget at 5500$ au lol
@@tunerimpala5658 CG is Center of Gravity. Its Physics and math. The rear axel acts as a lever and with the center of gravity so high it's incredibly easy to get it to wheelie. This is one of the reason rake was used in early drag cars. It was a simple way to put the CG closer to the axel center of rotation.
i say coyote awd in a lighter blazer toss f150 system in tons of power like a v8 turbo cyclone. 1200hp on stock sealed coyote or up to 2000hp on factory block with built motor. Oh and factory ecu can can get coyote in the 6s and s550 in the 7s and f150s in the 8s in the 1/4 stock sealed motor damn near just boost and and fuel no heads no cams no pistons no rods no opening the engine
Yeah, I'm still not tired of Ruby, so she needs to stay just like she is. George needs to weld in some regular engine mounts with Ty, with some rubber, so it has a little cushion from the bumper stands!
Ruby with a blower has to be a go! Would look soooo sick! the blazer with a nice turbo set up would be a lot faster and easier to control wheelies I think. I'm all for this for sure!
Ruby is the "hey, do you want a 7 second slip?" Car/James's car The blazer is Georges Leroy and Mullet are Cleetuss McFlurry should be Tys We need one more car!!!
Yeah I thought mcflurry was being built for Ty... then this episode when cleetus was showing the customization on the oil pan, he said "to give extra clearance for when jackstand does a wheelie next weekend" And that kind of disappointed me... not that we don't love James.. I just had my hopes up that more guys were going to get to drive
Man Cleetus and his crew have come along way. To be able to build a car from scratch like that and make it look as easy as they do is really impressive.
@@CertifiedRedneckEngineer But think about it ruby with the blower and rocky with a big turbo or maybe two turbos. I don't want the change for ever but a year or a couple months would look nice.
I think Ruby could take real advantage of the blower, as for Rrocky, no matter what kind of engine you put in it, you guys should weld a wheelie bar on the back to help keep that thing on the ground, maybe also find a hefty engine to put in it!
Blower motor in Ruby would be cool to see what she can do on the track. But Ruby is a turbo car from the get. Maybe twin turbskis on Ruby To level up. Rocky would be sweet with crank driven procharger if you can make it work for drag and drive events!
Ain’t crazy about the idea of the blower motor in ruby but I think I might come around too it. As for the blazer, y’all should give an 05-06 blazer in-line 6 and turbo it a go. Would be a cool combo and with a turbo i6 the launch will probably be easier to ramp in.
@Cleetus McFarland this is my vision of an engine setup i have in my head. Im not an engineer or a mecanic but here is what i see would be a very good setup: Inspired by Honda spoon engines that revs at 10/11/12k rpm :: 632 big block chevy Machined block to have wider crankshaft support ( where it sits) Machined cranshaft for high revs Forged Steel rods and pistons Billet aluminum heads Titanium push rods and springs The biggest supercharger u can get The biggest blower that fits there Methanol injected Many more. Dont forget the wheelie bars 😜 Btw its very Nice to see a new project like mcflurry. Cheers guys
I'd love to see what you guys can do without computers. Straight up old school carburetored!!!! You guys do amazing work with all this efi, time to see what you can do in manual mode!!!
Little nuts and definitely stupid idea and ridiculous to make work let alone get it it somewhat "efficient"/worth it but Stay with me keep the big turbo but add a tall ass blower compound/stage it or keep the big turbo look but go balls out supercharger and swap it a with big procharger and again compound with a big ol blower red/white(blue?) Naked carbon(composite with other fibers to get the colors may be required) fiber hat and all.
Man, been watching for a long time and seen a few people come and go, but it's hard to imagine this channel without George. What perfect energy he brings to the table!!! Do it for Dale!
It's gonna be fun watching you go from huge oversized turbo lag to instant blower hit off the line. Put a Ruby set up in the Blazer. Maybe the turbo boost ramp can help keep the front down off the light. I think I just settled it for you guys. Can't wait... But It might be fun to put a nitrous engine in the blazer just to watch George's eyes when the 350 shot opens up.
I like the big blower idea in ruby that would be some fun to watch and a crank driven procharger setup on the blazer would be pretty sweet so its not so torquey on the launch.
Great idea with Ruby, i love the fact that the engine would be "second hand" thats what Ruby has always gotten, isn't it? Then throw a boosted Coyote in the blazer, or a big ol iron block something super heavy to keep all 4 wheels on the ground
Ruby just gets all the hand-me-downs, from junkyard truck motor to Rocky’s heart. I think it would be cool but I might also hate seeing it at the same time.. idk what I want 😂
The blazer would be cool to do old school, 4 bolt main 350 huge cam, double hump heads, dish pistons, old school blower with carbs. Simple to do and less to go wrong, And a huge long wheelie bar to keep the front down.
Ruby is so fast and consistent I feel like you shouldn't mess with her but that being said that is the perfect reason to swap units. Lord knows the blazer needs help.
@@Jason-dy6qy possibly, but its not like ruby, or even Leroy back in the day, doesn't put torque on the drive train. And worst case, might mean going to an engine mount trans/tunnel (like leroy) which will move weight forward and keep it on yhr ground anyways. The corvette is just built to handle it better I think.
It would be awesome if Ty could show how he mounts things like the fuel tanks and catch cans on the front of the cars. Especially like mullet where the front clip comes off in one piece. I love watching how he has been building McFlurry and I’m very interested in how things are mounted to the chassis
And Cleeter you are gonna love the Haltech stuff. They are genuine Australian made race car loving engineers over there at Haltech and they make everything in house. They have unmatched customer support and the ease of use for their Nexus line is top of the class. You guys are gonna love partnering up with them and I'd be willing to bet almost every car is eventually gonna get Haltech setups.
Would love to see the blower on Ruby. I think a procharger would be a cool build for you guys. Would be different for the channel. I know it’s on the C7 but it’s never used on the channel.
You guys should look into XS power's 12V lithium series, I personally know how heavy those D series agm's are, lithium is sooooo much lighter, could shave off a decent bit of weight
Definitely throw the blower motor in Ruby. Would love to see something different in Rocky, maybe even give ol JH a holler and throw a diesel in that thing
I know it won't be on time for Sick Week but I think a switch between Ruby and Rocky would be really fun to see, Ruby with that blower gotta be fk amazing and Rocky with a huge single that's proven to go 7s and a little more power band control (wastegate) will fix the wheelie problem
Love to see you guys finally running a PDM setup with the R5. Would love to see some info and hear your thoughts on the Haltech ecosystem after running Holley systems for so long
Gorge: you know who hasn't taken out an oil pan? Cleetus: You took out a whole frame!! Gorge: Yeah but not the oil pan 😉. LOL had me dying when I heard them say that
Here's a great unique idea. Since George loves to do sky wheelies in the Blazer. Why not just get a off-road long travel front suspension for it. That way he can lift the front end up as much as he wants. And the long travel will absorb all of it as it comes back down to earth!
I just love how important it is to keep things new without drawing things out with too many vids! The evolution with each car is fun to watch! Keep it up BROTHER!
It’s probably possible but it would be hard because how short and light the blazer is. It was doing wheelies with a engine making a quarter of the supercharged motor.
my opinion (if that's worth anything) is to let George decide what he wants rocky to be like. his love for that car is so real and so entertaining to watch!! you can tell he wants this rig to be something special. he's such a good addition to your team and he's the most fun person on this Chanel to me. make the guy happy 😃
This right here. Let him pick!
I agree
Most of the problems have been the tuning not being able to things under control. I think we all still want to know what this combo can do consistently.
@@dochaze1 I disagree. While it is great to be consistent and win, There are also things to learn for everyone along the way for the team and the fans. Be thankful they are sharing. Who wouldn't want to follow George's decisions and follow him for every step of this wins or losses.....
That's a good point I think actually!
My vote goes to whatever George wants! His love for his rig is so fun to watch, and we can feel his heartache everytime something goes wrong. I think I speak for many that we want George to pull some W's this season
I truthfully don’t care if he tears it up so many times they end up building a jig and put prebuilt bolt in front clips on it aslong as it stays how he wants it and is happy
Im kinda done with george and breaking everything he gets in you know ? Dont get me wrong, must be fun and all but for the averge viewer ? He steps in, car breaks, needs fixing again.
@@firefly2472 crazy idea, but make the blazer electric. has all the space for it. it will make it heavy enough he cant launch it to the moon, and seeing electric drag suv would be unique
I think they have something planned that will blow Georges mind! :) - These boys never disappoint
yeah this is exactly the same thing i said! George is a huge reason why i love this channel so much as his energy and emotions are so pure and warranted that i only want whatever makes him happy!
100% gotta be ruby with a blower will definitely look mad sick
That would look insane, its a must.
Agreed
7 SEC BLOWER CAR ALERT
Put Rocky On Nitrous 100%.
Ruby needs a blower for sure
Personally, I think that throwing a blower on Ruby would be one hell of an idea and possibly an idea for Rocky throw a pro charger on him
McFlurry is the most exciting project you’ve done in a while, I love the new platform and the unknowns.
but the body is so ugly
I couldn't agree more I look forward to the updates.
Unknown- Where the hell is the transmission?
Be cool to have a serious nitrous setup in Rocky. Maybe even something old school with a big carb.
very excited for this build too, especially since its a stick car
Be cool to see the blazer with a crank driven prochager and see what ruby dose with the supercharger
Love that idea
Put a 1005.8ci Godfather Big Block in rocky.
Would love to see a procharged setup! Im in on this idea. Would help keep the front end down to i think.
472 crank
Crank Prochargers hit harrddd. That Blazer would go to the moon lol
I could feel George's heart sink and hear the tears just listening to him when you told him you wanted to take the blower motor out of rocky
Supercharge rocky
"I aint even walking over there" Says it all
i say coyote awd in a lighter blazer toss f150 system in tons of power like a v8 turbo cyclone
K-swap Rocky! That'll cure the torque problem.
Cleetus and James treat George like a 2nd class citizen...much like James May in Top Gear. It sucks. They don't care about his feelings at all. He should refuse to help in any engine swap...that would be rubbing salt into the wound 😡
I LOVE the idea of the blower in ruby as a TEMPORARY solution just for some content, unless it somehow goes faster than it could stay lol
Give Rocky a massive crank-driven procharger
Second this! Get that weight up front!
i say coyote awd in a lighter blazer toss f150 system in tons of power like a v8 turbo cyclone
Coyotes fucking suck. Why put a heavy giant engine in the small engine compartment of a blazer... Gen 1 sbc based off a bowtie block would be a much better option.
It’s the only thing they are missing. And a spray car lol
I agree that would be rad!
Ruby's single turbo is iconic. That being said change can be exciting
I wanna see what that blower combo does in a vette too!
@@boostsr2065 endless wheelies, most likely
The motor/blower combo matches George better than anything else would
If we give George a diesel I don't think he'll be doing giant power wheels
Blower motor in Ruby, bigger blower motor in Rocky. I totally agree George is the blower guy
i say coyote awd in a lighter blazer toss f150 system in tons of power like a v8 turbo cyclone
Bigger Blower, and much heavier front weight :) Perhaps something like an engine out of a Semi would help hold that beast down.
COME ON NOW!!!
Don’t do that to George…
Get some better bolts and a better motor plate .
DONT DO IT !!!
I think the blower motor from rocky would be awesome in ruby for a few weeks/months it would be a really cool change
Rather not see Ruby go slower but if it's just for this race until her engine is done then go for it, it'll make for some cool videos with all the noises at least. Rocky should have been front mount ProCharger right from the start, make it happen because you guys need something in the fleet with that combo
Assuming they run the small blower pulley, I doubt it'll be much slower than single -turbski Ruby. That blower LS is no joke, and it'll have instant torque
The C7 is Procharged
@@RaddestDad C7 is not part of their race program, it' just Cleets daily, It's not a front mount crank drive either
@@halofreak1990 Except you're not factoring in Ruby's Powerglide instead of the extra gearing Rocky's 400 has. But, a better balanced chassis and areo might overcome that as long as the engine can spin the RPM it's going to be crossing the towers at.
I thought the same but to be fair how many events have we watched where they were not even pushing Ruby and just aiming for 8.50s? Probably wouldn't be a big difference tbh
I'd hate to see the blower leave the blazer, but it would bo cool in Ruby, but maybe - Big Blocky Rocky?? Y'all are steamin' on McFlurry! That is an impressive build! I was really surprised about all of the features of the Haltech system too, super neat! Definitely looking forward to Sick Week!
Yeah the Haltech is phenomenal, arguably the best ecu on the market, u can literally run everything on 1 box unlike other brands where u need multiple boxs to run everything.
I'd love to go nexus in my dirty old Commodore but it's way put a my budget at 5500$ au lol
The blower setup is too good to be in Rocky honestly. If it goes into Ruby she will fly 💨
I think a big block with some nitrous would be dope.
@@seanissomething The blower in Ruby would be awesome, but I think those rear A arms tabs would be hating it! Tons of Torque!
At this point I'm convinced that George could wheelie the Blazer just with Flintstones power.
The CG is just dumb, so peddle power is all it needs
@@procatprocat9647 have you driven rocky? How do you know
@@tunerimpala5658 CG is Center of Gravity. Its Physics and math. The rear axel acts as a lever and with the center of gravity so high it's incredibly easy to get it to wheelie. This is one of the reason rake was used in early drag cars. It was a simple way to put the CG closer to the axel center of rotation.
i say coyote awd in a lighter blazer toss f150 system in tons of power like a v8 turbo cyclone. 1200hp on stock sealed coyote or up to 2000hp on factory block with built motor. Oh and factory ecu can can get coyote in the 6s and s550 in the 7s and f150s in the 8s in the 1/4 stock sealed motor damn near just boost and and fuel no heads no cams no pistons no rods no opening the engine
@@tunerimpala5658 as Loki said.
Educate yourself before commenting in future.
Thanks.
Rocky needs a big block twin screw blower setup.
George’s delivery on “yeah, but not the oil pan” after “you’ve taken out a whole frame” was killer.
"You know whose never cracked the oil pan?" "You cracked the whole frame!" "Still not the oil pan though 😬😬" george too funny 😂
Seeing Ruby get a full makeover will definitely be different but exciting! Also Cleetus and Jack stand letting George cook was hilarious
we at least need to see ruby try with a blower
Yeah, I'm still not tired of Ruby, so she needs to stay just like she is. George needs to weld in some regular engine mounts with Ty, with some rubber, so it has a little cushion from the bumper stands!
Ruby was looking so good with the hood and single turbo set up.
I smell a George burner account here 😂
@@kevhans1 don't mind me I am just nobody. But no, not George.
Ruby with a blower has to be a go! Would look soooo sick! the blazer with a nice turbo set up would be a lot faster and easier to control wheelies I think. I'm all for this for sure!
Sounds like this might be the perfect opportunity for the NASCAR truck to come out and make sick week.
He loves it 2 much and doesn't want anything to happen to it lol
I'm truly curious to see what the blower setup would truly be capable of without wheelies
Rocky needs a huge procharger set up!
I don't know if I would see Rocky the same way if he didn't have that blower, but it would be amazing to see Ruby with that blower!!!!
Haltech is next level stuff. Their car control and monitoring is unreal
Sure is, I'm impressed!
Haltech - Great Aussie technology
ZZ632 for Rocky, put some mass in that front end!
Hopefully they send the Aussie giraffe from haltech to help em out cause those blokes seemed like useless salesman.
@@tballz1988 Good ole tuning fork!
Having a crap day today. Threw a piston into my valves on my 3.5 Ecoboost. But your videos always make my day just a little better!
5.0 swap
James horsepower limit estimation for the rods is so precise. I love the confidence
I really feel like the McFlurry should kind of go to Ty as a huge thank you for all the work he’s done in your shop.
Ruby is the "hey, do you want a 7 second slip?" Car/James's car
The blazer is Georges
Leroy and Mullet are Cleetuss
McFlurry should be Tys
We need one more car!!!
Yeah I thought mcflurry was being built for Ty... then this episode when cleetus was showing the customization on the oil pan, he said "to give extra clearance for when jackstand does a wheelie next weekend"
And that kind of disappointed me... not that we don't love James.. I just had my hopes up that more guys were going to get to drive
Sam needs a top fuel dragster.
All that work he gets payed to do.
Ty is a very well paid employee trust me and I'm sure his time will come
Man Cleetus and his crew have come along way. To be able to build a car from scratch like that and make it look as easy as they do is really impressive.
All it takes is money friend
@@MrCheaterpipe talent makes it look easy, money makes it look good.
@@MillionairX crazy talent ! i agree
@@MrCheaterpipe All it takes is WORK and the money will come.
Blower motor in Ruby yes. Engine for blazer should be some sort of nasty LS. Then spray you can feed in slowly. Maybe even 2 kits!.
I just want whatever is gonna make George happy!
I love having rocky with the blower but 100% up for the idea with the engine change.
Not so much so with me
@@CertifiedRedneckEngineer But think about it ruby with the blower and rocky with a big turbo or maybe two turbos. I don't want the change for ever but a year or a couple months would look nice.
I think Ruby could take real advantage of the blower, as for Rrocky, no matter what kind of engine you put in it, you guys should weld a wheelie bar on the back to help keep that thing on the ground, maybe also find a hefty engine to put in it!
👆👆👆👆👆👆👆
Let's talk i got something awesome and incredible for you❤️🎉❤
Can't use wheelie bars in the classes they run. Usually it disqualifies a car as a street car
@@echo9082yea
They just need to do a big chop n lower rocky to the ground
Blower motor in Ruby would be cool to see what she can do on the track. But Ruby is a turbo car from the get. Maybe twin turbskis on Ruby To level up. Rocky would be sweet with crank driven procharger if you can make it work for drag and drive events!
I wanna see the blower motor in ruby to see what that combo is really capable of.
@_giveaway_cleetus my mom won’t let me talk to strangers. Sorry.
Has Garrett made a "don't fall for this" video yet? Not that it matters... does this scam still work? 🤔
I’d love to see a hardcore nitrous build in Rocky. Or if not in rocky just in general
oooo i like this better than my idea of a big single.
Yesss!
I'd like to see a full nitrous build in that thing for sure!
Would be awesome
It’d make it easier to leave. Pull all the power out of the 60ft
Ain’t crazy about the idea of the blower motor in ruby but I think I might come around too it. As for the blazer, y’all should give an 05-06 blazer in-line 6 and turbo it a go. Would be a cool combo and with a turbo i6 the launch will probably be easier to ramp in.
trailblazer*
Would love to see a max effort 4.2l i-6 turbo. If the barra boys can do it. . .
@Cleetus McFarland this is my vision of an engine setup i have in my head. Im not an engineer or a mecanic but here is what i see would be a very good setup:
Inspired by Honda spoon engines that revs at 10/11/12k rpm ::
632 big block chevy
Machined block to have wider crankshaft support ( where it sits)
Machined cranshaft for high revs
Forged Steel rods and pistons
Billet aluminum heads
Titanium push rods and springs
The biggest supercharger u can get
The biggest blower that fits there
Methanol injected
Many more.
Dont forget the wheelie bars 😜
Btw its very Nice to see a new project like mcflurry.
Cheers guys
I’ve always loved how fast Ruby was with the big single. I’d be happy to see her still run that setup
I agree but not willing to break the 69 likes
When George was talking about going 95 mph and Jack stand said “ if you can push it that fast” had me going 😂
Yes, whatever keeps the front end on the ground for rocky. Single turbo or procharger. Ruby with the blower of freedom should be wicked!
I'd love to see what you guys can do without computers. Straight up old school carburetored!!!! You guys do amazing work with all this efi, time to see what you can do in manual mode!!!
Ruby looks so good with the big single turbo 😢
and about 400 lbs on the front bumper
Yea but she will look super good with a blower as well ..
Little nuts and definitely stupid idea and ridiculous to make work let alone get it it somewhat "efficient"/worth it but Stay with me keep the big turbo but add a tall ass blower compound/stage it or keep the big turbo look but go balls out supercharger and swap it a with big procharger and again compound with a big ol blower red/white(blue?) Naked carbon(composite with other fibers to get the colors may be required) fiber hat and all.
@@freedomfox8183 your not wrong the big single turbo is just rubys signature look in my opinion.
Man, been watching for a long time and seen a few people come and go, but it's hard to imagine this channel without George. What perfect energy he brings to the table!!! Do it for Dale!
👆👆👆👆👆👆👆
Let's talk i got something awesome. and incredible for you🎉
Is this George's alt account?
I like the nasty turbo look on Ruby and the crazy blown set up on Rocky. Just feels right
Yeah let's keep it that way
Cleeter: Opportunity to look at the rods!
Jackstand: their there now
George is a pro charger kinda guy
Stoked for that haltech rep he looked so stoked to be able to talk about a product he is so proud of! Especially to get to come to the cleet shop.
I want whatever James recommends for rocky. James is always full of good idea. And I like nitrous
Put the motor that’s in WT in rocky
Rocky needs a nitrous big block to weigh the front end down and about 6 stages to keep it there
It's gonna be fun watching you go from huge oversized turbo lag to instant blower hit off the line. Put a Ruby set up in the Blazer. Maybe the turbo boost ramp can help keep the front down off the light. I think I just settled it for you guys. Can't wait... But It might be fun to put a nitrous engine in the blazer just to watch George's eyes when the 350 shot opens up.
I think a hugeee centrifugal supercharger would be awesome on the Blazer, maybe even a twin centrifugal supercharger setup.
go with f2 procharger
100% centrifugal supercharger in Rocky. Low midrange torque and high horsepower. It’s the perfect match. Twins would be even cooler too👀
706 with 3 kits
I like the blower idea for our girl Ruby,
But we gotta have something crazy for Rocky! Needs to be hilariously insane 👍🏻
Hell yeah brother 💪💪❤️❤️you’ve been selected for today’s giveaway exercise🎁🎁🎁🎁Dm the above number to claim prize ⬆️⬆️⬆️.
Keep the Blower on Rocky!
I like the big blower idea in ruby that would be some fun to watch and a crank driven procharger setup on the blazer would be pretty sweet so its not so torquey on the launch.
Great idea with Ruby, i love the fact that the engine would be "second hand" thats what Ruby has always gotten, isn't it? Then throw a boosted Coyote in the blazer, or a big ol iron block something super heavy to keep all 4 wheels on the ground
Ruby just gets all the hand-me-downs, from junkyard truck motor to Rocky’s heart. I think it would be cool but I might also hate seeing it at the same time.. idk what I want 😂
Single turbo > Blower Turbo has always been rubys thing, ya know.
The blazer would be cool to do old school, 4 bolt main 350 huge cam, double hump heads, dish pistons, old school blower with carbs. Simple to do and less to go wrong, And a huge long wheelie bar to keep the front down.
Hell yeah brother 💪💪❤️❤️you’ve been selected for today’s giveaway exercise🎁🎁🎁🎁Dm the above number to claim prize ⬆️⬆️
Would love to see what that blower can really do in the 1/4 in ruby who can actually hold the power down
Cleet “take a look at the rods”
Jackstand “ they’re there now”
😂😂
Ruby is so fast and consistent I feel like you shouldn't mess with her but that being said that is the perfect reason to swap units. Lord knows the blazer needs help.
Same. That smooth/consistent setup in Ruby might be exactly what the blazer needs. I have a feeling Ruby can handle the blower setup.
@@Sinixstar man I feel like the torque from that beast is going to kill the axles and torque tube. But would still be cool either way.
@@Jason-dy6qy possibly, but its not like ruby, or even Leroy back in the day, doesn't put torque on the drive train. And worst case, might mean going to an engine mount trans/tunnel (like leroy) which will move weight forward and keep it on yhr ground anyways. The corvette is just built to handle it better I think.
It would be awesome if Ty could show how he mounts things like the fuel tanks and catch cans on the front of the cars. Especially like mullet where the front clip comes off in one piece. I love watching how he has been building McFlurry and I’m very interested in how things are mounted to the chassis
I'm glad you guys are in touch with Brian. I've seen videos of his Mustang and the stuff he does. One classy, knowledgeable dude.
And Cleeter you are gonna love the Haltech stuff. They are genuine Australian made race car loving engineers over there at Haltech and they make everything in house. They have unmatched customer support and the ease of use for their Nexus line is top of the class. You guys are gonna love partnering up with them and I'd be willing to bet almost every car is eventually gonna get Haltech setups.
Would love to see the blower on Ruby. I think a procharger would be a cool build for you guys. Would be different for the channel. I know it’s on the C7 but it’s never used on the channel.
You guys should look into XS power's 12V lithium series, I personally know how heavy those D series agm's are, lithium is sooooo much lighter, could shave off a decent bit of weight
Ruby plus blower is a match made in heaven!
Ruby + Rocky’s engine and blower setup = all the freedom
yes!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Definitely throw the blower motor in Ruby. Would love to see something different in Rocky, maybe even give ol JH a holler and throw a diesel in that thing
McFlurry is going to be a beast!!
Ruby gets the blower, rocky gets a procharger
Exactly, procharger would provide less bottom end torque than the roots blower too.
Agreed
YESSS
This would be sick
We need to get this comment to the top I agree 100% with this
Love the idea of Ruby getting the blower. Even if its for a short period. To see that big blower going down the track would be sick.
“Big Dog Blower Ruby”.. Rolls Right Off The Tongue..
I know it won't be on time for Sick Week but I think a switch between Ruby and Rocky would be really fun to see, Ruby with that blower gotta be fk amazing and Rocky with a huge single that's proven to go 7s and a little more power band control (wastegate) will fix the wheelie problem
Love to see you guys finally running a PDM setup with the R5. Would love to see some info and hear your thoughts on the Haltech ecosystem after running Holley systems for so long
I’m more excited for this Godzilla mustang then anything you guys have ever done !!🤘🏼🇺🇸🦅
So glad to see you guys finally running a Haltech!
Praying you get your transmission in time! Keep up the awesome content
Ruby's single turbo setup never fails and goes down 99% of the tracks, dont change what isnt broken 🤷
👆👆👆👆👆👆👆
Let's talk i got something awesome and incredible for you!.!!
Gorge: you know who hasn't taken out an oil pan? Cleetus: You took out a whole frame!! Gorge: Yeah but not the oil pan 😉. LOL had me dying when I heard them say that
Weld the motor plate to the engine, inside the water pump passages etc. Ty get the Tig
Love George's enthusiastic reaction when u said 4 days 🤣
Putting rocks motor in rear view would be pretty cool I would love to see a nasty ProCharger setup on Rocky to kind of stay with the theme
You guys definitely need to take McFlurry to the McDonald's drive-thru when she's done!
🍦🏁🍦🏁🍦🏁
Call ahead to make sure the ice cream machine is working.
They won't be able to get a Mc Flurry in Mc Flurry because their ice cream machines are broken more than Rocky
@@kitsunedarkfire2915 😂😂🤣
Yes Ruby would look great with that blower sticking out of her bay. How about twin turbskis V6 for something different in the Blazer. Typhoon Blazer.
Here's a great unique idea. Since George loves to do sky wheelies in the Blazer. Why not just get a off-road long travel front suspension for it. That way he can lift the front end up as much as he wants. And the long travel will absorb all of it as it comes back down to earth!
Hell yeah brother 💪💪❤️❤️you’ve been selected for today’s giveaway exercise🎁🎁🎁🎁Dm the above number to claim prize ⬆️⬆️⬆️.
I just love how important it is to keep things new without drawing things out with too many vids! The evolution with each car is fun to watch! Keep it up BROTHER!
Rocky needs a procharged ls set up tbh 😮
Straight nitrous only?
It needs a big blown hat blower sbc from Steve Morris
yessss
A notch with the 7.3 has been a dream build of mine for a couple years now. Can't wait to see it rip down through there!
I think the blower in Ruby would be cool, I've really wanted to see yall tune and get a blower car running right!
It’s probably possible but it would be hard because how short and light the blazer is. It was doing wheelies with a engine making a quarter of the supercharged motor.
Dude George has been a great addition to the channel! 👊 that dude is always pumped
I liked Jeremy's channel but that was mostly George. When he canned George I kinda lost interest...
George is super nice in person too...
Everyone is really...
ruby is an iconic single turbo reliable car, i’d personally love to see it kept that way
👆👆👆👆👆👆👆
Let's talk i got something awesome and incredible for you❤️🎉❤
It looks pretty good with the hood on, too.
Hope it's not too late for an idea, but I've heard that the 4.2L I6 from the trailblazers can take some abuse and put out some good power with turbos.
Ruby with a blower is what she has been waiting for. This is a must have for the channel. Talk about badass!
I wholeheartedly agree!
blower on ruby would be really cool, still want to see her run a 6 with the single turbo
Loving all the uploads lately Cletus, thanks brother
blower motor in ruby and a nasty N/A setup in the blazer
No way Ruby looked great with the single turbo and she was so consistent!