Dremel Flame Burrs - Kutzall(Extreme) and Saburrtooth (Orange Ex.coarse)
HTML-код
- Опубликовано: 2 авг 2024
- The flame 1/8th burr for dremels, has to be one of the most common wood working burrs. Which is better or how are they different - Kutzall and Saburrtooth
Thank you to every one who has bought me a coffee (it keeps me going)
Buy Me a Coffee at
www.buymeacoffee.com/mattcarves
KUTZALL BURRS AND DISCS 5% Discount Use the code (Case sensitive)- MATTCARVES website: kutzall.com/?aff=70
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
00:00 Introduction
00:52 Flame burrs vs soft wood
02:44 Kutzall and saburrtooth burrs vs plywood
03:50 wet wood carving kutzall vs saburrtooth
04:35 Kutzall and saburrtooth flame burrs vs hardwood
05:48 wood spirits with saburrtooth and kutzall 
Хобби
Hi Matt
Fellow sawdust botherer here in Loburn.
Great work on a sensible comparison of the bits.
Im just converting to the Kutzall discs after many years on just sanding discs and grinders, Dremel, handtools and hand sanding on unusual furniture and gunstocks.
All the best
Bruce J.
I take it your getting kutzalls from Carbatec in Christchurch. Just about went to Loburn the other week with that fire but got sent to the Amberly one and then the Swananoa one the next day. Nice to see some rain today. Cheers for watching
Thanks Matt, I was hoping to tune in and see the live broadcast, I had it marked. However this was a very interesting experiment, I have both of these burrs and find them excellent top quality.
No real clear winners between the two. Probably just personal preference in the end. Cheers for watching 👍
Twenty years ago my Dremel went in a drawer because i could work just as fast with a Sheetrock knife. Those two bits might convince me to pull it out again.
Awesome. Cheers for watching Dennis 👍
Hey Matt , missed your live demo😊thank you that was very educational and like you said they both perform well but with a difference . Thank you again🙏
My pleasure! Have a great Day. 🙂👍
Thank you Matt, as always for this video. Sometimes it’s easier to learn by seeing visual references.
Glad it was helpful! Cheers, Linda.
Thanks for the comparison. I use both Kutzall and Saburrtooth burrs (although nowhere near your skill level). I agree that these burrs are generally interchangeable, broadly speaking. My perspective is that Kutzall burrs are of slightly better quality, but where Saburrtooth has a huge advantage is in the wide variety of burrs they offer--far more shapes and styles than Kutzall. It's easy to be the best when there's no competition. As for durability, I haven't seen much of a drop-off with Saburrtooth in comparison to Kutzall, but again, I don't carve nearly as much as you.
Yeah, I totally agree. Sometimes, it just boils down to which is more convenient to buy.
I was going to type out a comment, but you kind of nailed what I wanted to say. I have a few of the 2 inch disk and cup burrs and I wish it was easier to find Saburrtooth for me.
@@williamfawkes8379 Saburrtooth has a mailing list. If you sign up, they send monthly discount codes good for 24 hours. Pretty good deal, that.
Thank you! It was interesting and informative!
Cheers for watching 👍
Great video and side by side comparison!
Thanks Chris 👍
Both bits have a place I think. I'm just getting into a bit of wood carving and don't have any good bits or other carving tools like knives. The bits I have are too fine to take much wood off. I'll be getting some more aggressive bits. Seems these two bits are useful depending on how fast you'd want to remove the wood.
Cheers for watching and commenting Daniel. 👍
@@MattCarves Thanks and cheers to you for the video and information.
I was wondering about the orange burrs now I need some lol stay safe just carve
Yeah they are pretty good, but I will stick with Kutzall. Cheers Rob
Thanks Matt. Good information. Both appear quality products. Kunzall is the way I have gone. Buying more through you link soon.
Have you bought from kutzall before, the shipping is quite expensive. You might be better off or at least have a look at the prices from carbatec in Australia they sell kutzall. 👍
@@MattCarves Yes I will check. Thankyou.
I have both types and they both do a great job but I have found one maybe a little bit better for certain things thanks for the video be safe
Cheers, Mark. 🍻
Hi matt, love the videos. I'm just starting out carving. I wanted to know if you ever carved on a wood slice.? Is it possible? Would you be interested in doing a video on it. Thanks for all the videos.
Yes you can! carve on a wood slice. I am taking it that you mean you will be carving a wood slice into end grain, yes this can be done but is it would be hard to do. It would be ok if the wood is soft, and it would depend on the pattern as well as some areas would be quite fragile. I wouldnt do a video for these reasons. Sorry about that
Love u matt but i had to laugh been from the uk to your "wit woods " 😂 great vid as always
LOL. Yeah, I look at the automated subtitles for my videos sometimes for a laugh. 👍😆
Awesome, I'll have to buy myself a kutzall flame burr, just because I'm getting more and more large carving orders.
Cool, check out carbatec nz. They sometimes have kutzall extreme flame burrs if I haven't bought them all. 🙂
@@MattCarves will do
Danke für den Vergleich.
In Deuschland sind beide nur schwer zu bekommen.
Es gibt aber noch 3 fast baugleiche Fräser der deutschen Marke Proxxon.
Hi. They are hard to get here as well. will check out that brand Proxxon. Thank you for watching👍🙂
@@MattCarves Proxxon macht auch anderes Werkzeug das relativ gute Qualität hat.
Übrigens auch eine Art "Dremel " .
Thanks for the demo- v helpful. Does the Kutzall burr dull over time?
Cheers for watching. Yes they do dull over time. I get about 1 years use out of mine.
@@MattCarves Thanks for the info.
Maybe next time dont speed up the video so we can see how long its actually taking.