so , if you can, i am blind, got my T9 here, it will not fill, i can feel air comming from somewhere between one of the tanks and the gauge area, tightened up the gauge and still feel air. and it will not fill or pressurize the fill probe and line. got any suggestions? also what is the process of recocking after you have cocked and pulled the trigger and it does not want to cock again, is it like the hp ss plus where ya gotta put a mag in and let the bolt probe tag it before recocking? just trying to get a run down from some one who has it in their hands and can operate it. thanks.
@@AIRGUNZ_MILITIA dude just call BIN, if you just received it and it’s giving you issues return ii or contact them. To decock you have to cock it and pull the trigger at the same time. It’s actually easier
That's great but you should have made the lower tank hot swappable. Doing the front tank means the barrel is in the way, your pointing it in unsafe directions and you are putting your hand infront of the barrel.
Just got my T9 yesterday. I cannot charge it with the Air Venturi G9 hand pump. Unless I hold the connector in the tank, it leaks and I can’t pump it with one hand. How do I fix this? When is a user manual going to be available?
My bintac t9 is leaking air from the bottom tank I feel like it’s missing a seal. Or something. Can you please post a video of all parts assembly on the tanks?
Can u show how to install accessories and or which ones u can buy. I bought the moderator. Donny moderator. Cnc sliding stock. And laser dot and scope. People need to know since no instrustion manual came with it. These can be dangerous if u just unscrewing tanks. They have 3500 psi in them. No emphasis on saftey guys
Awesome Bin! So you can shoot pellets? That's cool because I know the 9mm version of s45 you can't shoot pellets. Would love a chrono video including pellets.
Sorry buddy I wish I could have time to do it, we have been extremely busy on all kinds of project and service. On 6/18 we have to go to Utah for RMAC we have team flying from Spain. Really no time to do the vidoe. This video was taken around 11pm haha
I just got mine yesterday I didn’t know that it came with air in it already I pulled the bottom tank under pressure thank god I was holding it tight. Is there a way to bleed the tank for working on it? Do you know ?
1. That ring youre supposed to turn clock wise is very hard. 2. Fill probe got stuck while trying to top it off 3. This thing out the box misfired, suuuuuper dissappinted
The bad reviews are making me rethink buying from this company
I can confirm that fx hybrid slugs shoot 781 fps! Nice job Bintac
Wonderful buddy thank you
It fits in the Mag?
I love mines so far, it’s amazing keep making videos guys
Thank you
so , if you can, i am blind, got my T9 here, it will not fill, i can feel air comming from somewhere between one of the tanks and the gauge area, tightened up the gauge and still feel air. and it will not fill or pressurize the fill probe and line. got any suggestions?
also what is the process of recocking after you have cocked and pulled the trigger and it does not want to cock again, is it like the hp ss plus where ya gotta put a mag in and let the bolt probe tag it before recocking?
just trying to get a run down from some one who has it in their hands and can operate it.
thanks.
@@AIRGUNZ_MILITIA dude just call BIN, if you just received it and it’s giving you issues return ii or contact them. To decock you have to cock it and pull the trigger at the same time. It’s actually easier
@@AIRGUNZ_MILITIA call BIN
Jason saves the day once again :D
Thank you
That's great but you should have made the lower tank hot swappable. Doing the front tank means the barrel is in the way, your pointing it in unsafe directions and you are putting your hand infront of the barrel.
Just got my T9 yesterday. I cannot charge it with the Air Venturi G9 hand pump. Unless I hold the connector in the tank, it leaks and I can’t pump it with one hand. How do I fix this? When is a user manual going to be available?
Is there a cap screw in the package to plug the hole when you want to remove the 90 degree tank? Will it do 8 shots on only the front tank?
When will the t9 be ready to order? Every sight says preorder
0:55 what material is cnc??
I'd like to see a video on how to add the buttstock
You will we do one by one
Yes me too. I bought it too
Can you shoot without the bottom tank??
My bintac t9 is leaking air from the bottom tank I feel like it’s missing a seal. Or something. Can you please post a video of all parts assembly on the tanks?
Can you remove the bottom tank ????
Can u show how to install accessories and or which ones u can buy. I bought the moderator. Donny moderator. Cnc sliding stock. And laser dot and scope. People need to know since no instrustion manual came with it. These can be dangerous if u just unscrewing tanks. They have 3500 psi in them. No emphasis on saftey guys
Also I bought the butt stock
Awesome Bin! So you can shoot pellets? That's cool because I know the 9mm version of s45 you can't shoot pellets.
Would love a chrono video including pellets.
Sorry buddy I wish I could have time to do it, we have been extremely busy on all kinds of project and service. On 6/18 we have to go to Utah for RMAC we have team flying from Spain. Really no time to do the vidoe. This video was taken around 11pm haha
Bro, I bought one of these guns, I love it, but it leaks. Can you give me some advice on how to make it stop leaking?
I just got mine yesterday I didn’t know that it came with air in it already I pulled the bottom tank under pressure thank god I was holding it tight. Is there a way to bleed the tank for working on it? Do you know ?
@@KawBoyTexas1309 man, I wish I did know. I’m fairly needed this gun as well.
I need that bad boy in .45 cal! 😁
Haha there will be S45 it’s already there buddy
1. That ring youre supposed to turn clock wise is very hard. 2. Fill probe got stuck while trying to top it off 3. This thing out the box misfired, suuuuuper dissappinted
Do they ship to u k
Do you ship another country buddy?
Everything I brought from Fox Air power aea is trash with big issues and they don't replace nothing 😢
Why don't you teach people how to find an a e a weapon that does not leak?
Beautiful!
I´d like a Huben GK1 clone with 9000psi Tank .35caliber 4500psi output and under pressure swappable Tanks dude
Clone? We do not do that my friend we have our own pistol
I’m interested
怎么能得到
网上买啊 airguntactical
I got the.25 cal., and.30😢 cal. Trash
Damn really what's wrong with them?
怎么能得到