I faced similar issue with my Gixxer 155 cc. The gixxer rear brakes are also made by Nissin and so are made for Honda Dazzler. So I purchased Dazzler pads (Cheaper than Suzuki pads and exact match dimension wise) and I felt exactly what you have experienced. Moe brass in pads, very hard. Now, I understood why I should stick to original parts. Even though I was not expecting this happening with Honda parts but it is what it is. Thanks a million for this video
@@engineersbychance0700 break kese h aghe k hme to thik nhi lghe test ride li thi hmari pulsar twin disk k break hlka dabane pr bhi kam krte h ye kam hi shuru 20% dbne k bad krte h..and handle bhi turn bhut thoda hota h
I saw you had a rtr before. I have a rtr and the issue is similar to what you had shown in the video. The rear disc brake of my bike had very poor braking so I did something to make it aggressive. 1. Steel braided Hose (non-abs) 2.new pads 3. New disc plate 4. Dot 5.1 brake fluid 5. Brake pump is neatly reassembled. 6. The caliper o-rings were expanded so I replaced with local ones (dap company) as i didn't want to spend 1.3k on brake minor kit. Despite all of this the braking is almost zero! The initial brake bite is nothing. When I apply brake (rear) the bike doesn't stop if the speed is above 50kmph. But the brake works fine when the speed is lower than 30kmph. Could you tell me what's wrong in the brake system? I need to sort it out and make it good.
Brother apka rear wheel hug or wheel ki bearing replace kra dho aap usa. Fr problem solve ho jya gi .. or. Any helping chiya esa. Related to ap. Instagram ma contact kr sk ta hoo
Hi Brother, after installing this brake pads noise was vanished but after using them for 15-20 days brake pads were bend and this time they were making different noise
Bhai pareshan ho gya tha sbkuch try karke dekh liya ab jakr ye video mila to smjh aa rha meri hornet ki bimari 😂😂
Haan brother ma vi bahut patasn tha or agr ap xpluse 200 4v ki rear discs plate or pads laga ho ga to breaking or vi achi ho jya gi
Brilliant explanation didn't miss a single detail.
Thanku brother for supporting 🔥😮🔥
I faced similar issue with my Gixxer 155 cc. The gixxer rear brakes are also made by Nissin and so are made for Honda Dazzler. So I purchased Dazzler pads (Cheaper than Suzuki pads and exact match dimension wise) and I felt exactly what you have experienced. Moe brass in pads, very hard. Now, I understood why I should stick to original parts. Even though I was not expecting this happening with Honda parts but it is what it is. Thanks a million for this video
Honda hornet 160r bs4 me cbr 150 ke rear diskpad lagenge kya
Very nice information ✌️✌️✌️keep it up brother...
Thanku brother for supporting 🔥😮🔥
At last somebody got benefited by the trick.
Yes brother 🔥🔥🏍️
Hornet 2.0 ka rear mono shock up bahot hard hai ride quality aur plush banane k liye kis bike ka mono shock laga sakte hain ?
Nice information brother 👍 awesome vlog brother 😎
Thankuu brother'for supporting 🔥😮
@@engineersbychance0700 break kese h aghe k hme to thik nhi lghe test ride li thi hmari pulsar twin disk k break hlka dabane pr bhi kam krte h ye kam hi shuru 20% dbne k bad krte h..and handle bhi turn bhut thoda hota h
Bahut badiyaaa bhaii😍😍
Thanku brother for supporting 🔥😮
Frand vale bhi chenj kar sakte he ky
I saw you had a rtr before.
I have a rtr and the issue is similar to what you had shown in the video.
The rear disc brake of my bike had very poor braking so I did something to make it aggressive.
1. Steel braided Hose (non-abs)
2.new pads
3. New disc plate
4. Dot 5.1 brake fluid
5. Brake pump is neatly reassembled.
6. The caliper o-rings were expanded so I replaced with local ones (dap company) as i didn't want to spend 1.3k on brake minor kit.
Despite all of this the braking is almost zero!
The initial brake bite is nothing. When I apply brake (rear) the bike doesn't stop if the speed is above 50kmph. But the brake works fine when the speed is lower than 30kmph.
Could you tell me what's wrong in the brake system? I need to sort it out and make it good.
Brother apka rear wheel hug or wheel ki bearing replace kra dho aap usa. Fr problem solve ho jya gi .. or. Any helping chiya esa. Related to ap. Instagram ma contact kr sk ta hoo
Cbr 150 which model you used plz tell..i am also having issue with my hornet2.0
Cbr150 ka disc pads lagna brother baki details video ma hn
@@engineersbychance0700 yes bro i have seen ur complete video..but which year model cbr 150's pad used
@@zeeshaanp5782 bs3 150 cbr brother
@@engineersbychance0700 ok thanks bro..very helpful
@@zeeshaanp5782 welcome brother 😊
Very informative video bhrother
Thankuu brother'for supporting 🔥😮🔥
Bhai front disk pad ka alternative bata do please...
very informative..!😊
Thanku brother for supporting 🔥😮🔥
Hornet se accha xblade ka brake hai. So uska brake pade lagane se problem solv hoga kya?
Hey Bro, I had same issue. After replacing the stock brake pad with CBR150 brake pad, issue is still same. Any suggestions?
Brother plz check the air in the break line
@@engineersbychance0700 service center guys checked everything. still making noise.
I think disc pads ko change kr dho bhei cbr 150 ka
Hi Brother, after installing this brake pads noise was vanished but after using them for 15-20 days brake pads were bend and this time they were making different noise
Bhai disc pad hard rahene se kya....??? Break jammed problem hota hai kya..??
No
No brother. But breaking poor ho gii or noise aya gi break apply ka tym
Dazzler or hornet ka rear calipers same hai
No brother I think minor differences ho ga
Thanks bhai
Welcome brother 😁
Osm
Hornet 2.0 ke front brake pad ko rear me laga sakte hai kya?
Nhi brother.
Bhai wo cbr 150 ke brake pads pure Ahmedabad me kahi nahi mil raha kya karu?
Brother kindly order on showroom
Good bro... #ajjurauthan
Thankuu brother'for supporting 🔥😮
nicccc brooooo
Thanku brother for supporting 🔥😮🔥
Superb
Thanku for supporting keep supporting 🚩🚩🏍️🏍️😊😊
Cbr 150 ka e disk pad chota hey
Same hn brother
disk pad Naya lagane ke baad bhi pura disk kaala ho jaata te kya problem he
Brother boz of poor quality of disc pad plz use genuine parts
Same issue I'm having with hornet 160r
Hi issue resolve hua
Will try 🏍️
Yes brother. And thankuu brother'for supporting 🔥
How was the performance now? And aslo provide part no.
Brother part no is on video
Cbr150 ka disc pad cost?
630 ka aspass ho ga brother,🔥
lakin bro hornet ka front brake pad hai wo be toh same hai .. usma ku ni ati noise
Brother ku ki vo break pad. Leather pad hn .. vo different han rear pad sa .. ap. Open kr ka dk sk ta ho brother ☺️
Mera 2017 top model he bs4 ka same issue..kya solve ho payega ye vdo se?
@@harindrarabidas6642 yes why not
Tumhara issue solve hua kya
@utkarshchonkar170 haan ji brother
@@engineersbychance0700 Honda hornet 160r bs4 me cbr 150 ke rear diskpad lagenge kya
Showroom walo ne mana nai kiya hornet me cbr ke disc pad lagane se?
Bola th brother pr us ka PSS koi solution vi ni ti to unko ma daal diya fr
Bhai brake ke piche kuch likha hai?
Thankuu brother'for supporting 🔥
Wrong information