Love the new workshop Martin, wish mine was that clean. Some good photos of your models on the wall of the other side of the workshop would be great as at the moment it's a little bare x
Great work with the workshop Martin! Everything looks very nice to work and film the videos! From here, the image I can see is very good and clear! Wish you a happy new year!
Great workshop tour! - really enjoy your videos Martin. As someone who is thinking of getting into jets after flying electric RC for many years, I've noticed there is a real lack of video tutorials on the internet on setting up turbines (and general maintenance) and how all the components work together. Maybe that is something you could look at? I would imagine I'm not the only one who struggles to find any decent info...
Hi Jim! I think that it is often overlooked as turbines are genuinely very easy to run now compared to a few years ago, and any problems are usually not particularly generic... but, I will be building a new jet in a couple of months and will remember the suggestion and make a video out of the install and setup!
Hi Martin, the work shop looks great, nice design and layout, will be much more usable for you. Be great to see you do a vid of your laser build👍🏻, hope you and your family had a lovely Xmas 🎄- Thehodge
Nice work shop Martin. I need to give my work shop and HANGAR a face lift also and you have given me lots of great ideas. Thanks. And HAPPY NEW YEAR 👍🏼👍🏼😎✌🏼✌🏼🇺🇸🇺🇸🇺🇸
Thank you for this great video again Martin! (in 4K ;-) , lovely! ) I am looking forwardd to the next one, especially the balance charging circuits bit ...
Hi Martin I have just found your channel just had a power box repaired by factory magic service I am a Jeti flyer I have had a DS 16 which went back to factory after two fly always And sent back seamed fine early this year I had a DS24 and in September I had three plan's just fall out of the sky not good news back to factory thay said they could not find anything rounge so as you can expect I am very worried about going forward with them I am not a biginer I am now seventy been flying all manner of power and gliders even raced one filth cars for GB team I am thinking of maybe looking at core as it would be nice to have the reliability and the back up looking forward to seeing more videos. Kind Regards Harry
I am sure that if you did decide to go for the Core, you would be very pleased with the results. Between safety design, safety features and cool new features not seen in other brands, it is going to take some beating!
@@MartinPickering-PickeringRC Thanks for getting back to me on the core I am going to have a look at one at Nexus next week here in the UK. Happy New Year Harry
I hate you! Need balsa dust, carbon fiber bits about and glue spots on tables. Dump tools on table also while your at it. Good plan and execution! Cheers
Love the new workshop Martin, wish mine was that clean. Some good photos of your models on the wall of the other side of the workshop would be great as at the moment it's a little bare x
Great work Martin 👍,turning the table top🤣🤣...
=D
Merry Christmas Martin.
Thanks! You too!
Great work with the workshop Martin! Everything looks very nice to work and film the videos! From here, the image I can see is very good and clear! Wish you a happy new year!
Thank you Ignacio! Indeed! Nice place to be and work was the plan and very happy with the result... now, just the work side to get on with again!
All looks perfect for the Igyro 3xtra video :-)
Lol
Very very cool and nice.
Thanks!
Great workshop Martin,best of luck working in it.
Great workshop tour! - really enjoy your videos Martin. As someone who is thinking of getting into jets after flying electric RC for many years, I've noticed there is a real lack of video tutorials on the internet on setting up turbines (and general maintenance) and how all the components work together. Maybe that is something you could look at? I would imagine I'm not the only one who struggles to find any decent info...
Hi Jim! I think that it is often overlooked as turbines are genuinely very easy to run now compared to a few years ago, and any problems are usually not particularly generic... but, I will be building a new jet in a couple of months and will remember the suggestion and make a video out of the install and setup!
Hi Martin, the work shop looks great, nice design and layout, will be much more usable for you. Be great to see you do a vid of your laser build👍🏻, hope you and your family had a lovely Xmas 🎄- Thehodge
Thanks Lee!! Will do!! Happy holidays!!
Very good
Thanks!
Nice work shop Martin. I need to give my work shop and HANGAR a face lift also and you have given me lots of great ideas. Thanks. And HAPPY NEW YEAR 👍🏼👍🏼😎✌🏼✌🏼🇺🇸🇺🇸🇺🇸
Love it!!! I put mine off for too long but super happy with the result, now bring on the builds and vids!! Happy holidays bro!
I love the new look
Thankssss!!!!
Nice Video Martin . Am the guy with kms T-shirt over a grey suit in Dubai . Keep going . Clean workshop . Thumbs up . Cheers
Thanks!! Yes! Brilliant picture we took! Will be uploaded soon too!!
Need to move the clutter back in!!.. A tidy workshop is the sign of a sick mind😂
Oh it's there, don't worry, it's just nicely hidden behind the camera lol
Merry Christmas martin, hope you've had a good one
Thanks Jenna! Same to you!
Mike says all the best mate
Merry Christmas and great video mate
Thanks Theordor134!
Thank you for this great video again Martin! (in 4K ;-) , lovely! ) I am looking forwardd to the next one, especially the balance charging circuits bit ...
Thanks!
Yeah 🤘🤙
Very nice video! Subscribed!
Awesome! Thanks!
Merry Christmas Mate!
Thanks bro, same to you!
Merry Christmas Martin ;)
Merry Christmas JP!
Nice with size is your shed
Hi Martin I have just found your channel just had a power box repaired by factory magic service I am a Jeti flyer I have had a DS 16 which went back to factory after two fly always And sent back seamed fine early this year I had a DS24 and in September I had three plan's just fall out of the sky not good news back to factory thay said they could not find anything rounge so as you can expect I am very worried about going forward with them I am not a biginer I am now seventy been flying all manner of power and gliders even raced one filth cars for GB team I am thinking of maybe looking at core as it would be nice to have the reliability and the back up looking forward to seeing more videos.
Kind Regards
Harry
I am sure that if you did decide to go for the Core, you would be very pleased with the results. Between safety design, safety features and cool new features not seen in other brands, it is going to take some beating!
@@MartinPickering-PickeringRC
Thanks for getting back to me on the core I am going to have a look at one at Nexus next week here in the UK.
Happy New Year
Harry
@@harrypeberdy4090 I am sure Paul will look after you, tell him I sent you! =)
I hate you! Need balsa dust, carbon fiber bits about and glue spots on tables. Dump tools on table also while your at it. Good plan and execution! Cheers
Its getting that way! It just looks so good when new but rarely lasts!