hey thanks for the vid. I noticed you had a view of CYTZ. I'm learning over at CNC3. Where are you learning out of. Have a great day and thanks again for the vid.
Hey, yes we use CYTZ a lot for our videos because of the view. CNC3 is a great airport to learn at. We did some flights there and it was nice. Hope your training goes well, all the best!
Hello Eric, I have 3 monitors in my setup. Monitor 1 (left) 27" (2560x1440) Monitor 2 (center) 49" Curved (5120x1440) Monitor 3 (right) 27" (2560x1440) What settings can you recommend so that all 3 monitors are well matched? My graphics card is an RTX 3090 Best regards Wolfgang
Hello Wolfgang, That is a good question. Your center monitor is definitely much bigger and also is curved so my offsets won't work with yours fully. However, I would recommend you to use a FOV that resembles the one on our video and then adjust the lateral offsets more due to your larger curved center monitor. I can't get exact numbers for you as I don't have that specific monitor setup. As noticed the resolution height of your monitors is the same in all the monitors. This means you can set the field of view for your comfort starting with the center monitor and then keep the field of view the same for the side monitors. Now, you would have to set the Lateral rotation offset of the side monitors based on the left and the right side view of the cockpit in the center monitor. Please do not consider the bezels while aligning the side monitors with the center monitors. If there is an instrument that is hiding behind the bezel, then it is ok. Now the entire view will be seamless. I hope this guidance can help you. Team Simuvision
Great video! So much simpler to follow than some others I have tried. Thanks and keep up the great work!
Thank you so much. It means a lot. We appreciate it.
Awesome video with really great information. Thank you.
Thank you, we appreciate it.
hey thanks for the vid. I noticed you had a view of CYTZ. I'm learning over at CNC3. Where are you learning out of. Have a great day and thanks again for the vid.
Hey, yes we use CYTZ a lot for our videos because of the view. CNC3 is a great airport to learn at. We did some flights there and it was nice. Hope your training goes well, all the best!
You look Indian ❤
Hello Eric,
I have 3 monitors in my setup.
Monitor 1 (left) 27" (2560x1440)
Monitor 2 (center) 49" Curved (5120x1440)
Monitor 3 (right) 27" (2560x1440)
What settings can you recommend so that all 3 monitors are well matched?
My graphics card is an RTX 3090
Best regards
Wolfgang
Hello Wolfgang,
That is a good question. Your center monitor is definitely much bigger and also is curved so my offsets won't work with yours fully. However, I would recommend you to use a FOV that resembles the one on our video and then adjust the lateral offsets more due to your larger curved center monitor. I can't get exact numbers for you as I don't have that specific monitor setup.
As noticed the resolution height of your monitors is the same in all the monitors. This means you can set the field of view for your comfort starting with the center monitor and then keep the field of view the same for the side monitors. Now, you would have to set the Lateral rotation offset of the side monitors based on the left and the right side view of the cockpit in the center monitor. Please do not consider the bezels while aligning the side monitors with the center monitors. If there is an instrument that is hiding behind the bezel, then it is ok. Now the entire view will be seamless.
I hope this guidance can help you.
Team Simuvision