Jajaja es increíble el sonido que logras con esa configuración, podrías compararlo con algún altavoz bluetooth reconocido como jbl charge 3 para tener un punto de referencia... Excelente video, saludos.
Я сделал колонку из тех же запчастей, но заменил усилитель, который уже был с bluetooth и получилось неплохо, не так, как на видео, но тоже хорошо. Корпус я взял пластиковый, остался от старого музыкального центра, а именно голосовик, тот что в центре стоит. Пассивка не так сильно двигается, как на видео, но звук лучше, чем у моей нынешней
Wowwwwww... Super duper basssss Beter than JBLgo 2 How long battery life sir? Nice build Bass flex And its awesome to see that its moving around it self because of the powerful bass And bouncing around Songs used Triboss-aquadrop Triboss-dumb Feel the bass
Hello VGV, first of all, CONGRATULATIONS, second I tell you that I have seen all the videos of the speakers that you have done and the truth is that everyone is great, you make it look so easy to make them that I really want to make one, especially the latter speaker that you did I liked and I would like to replicate it. I have a question and a suggestion, the first is how much or how thick is the table you use? Another question I have is what is the width or how much does the speaker measure from the frete to the back or the back? and the suggestion that I have personally is if you could make a video about how the suitch led connections are made ?. Well again CONGRATULATIONS and Thanks for sharing your projects and the time you spend to show us how they are made. No more I wish you many successes in all your projects and your daily life. Receive a great greeting from COLOMBIA. I remain attentive to a prompt response to my request.
I'm new in DIY speakes. 3S 40A BMS, 40A is total A for 3 batteries or 1? Example 3 of Samsung 35E 18650 Baterai Li-ion 8A 3500mAh 3.7V total of 24A. Or 3 of Efest Purple IMR 18650 Li-Mn Battery 2600mAh 3.7V 40A total 120A. Pls advice my pla using 3 baterries
How don't you have any problems with bluetooth and amplifier supplied by one battery? I thought it is needed to use DC-DC isolated module like B0505S-1w
can you make another video were you can describe every part you putting together eg speakers. or just drop the thing that need to make a complete mp3 speaker.
That's an awesome device the one you put together! Can I build a single speaker using the same electronics, or should I use a specific one for a single speaker? Thanks
@@VGBSpeakers m.nl.aliexpress.com/item/32908212954.html?pid=808_0009_0101&spm=a2g0n.search-amp.list.32908212954&aff_trace_key=60689e67b9974120b58a22f432e7f635-1551999623746-06023-UneMJZVf&aff_platform=msite&m_page_id=3633amp-1JLOAPU9SP9SMjWDg033Tw1555796054095 here i have bought mine too
Вот это супер. Теперь все как надо. Колонка выглядит просто отлично! Начинка тоже правильная. Ваша идея с кнопками это просто огонь! Век живи век учись. Все гениальное просто! Кусочек тонкой резины и все. Очень аккуратно смотрится и еще и водонепроницаемо. Обязательно возьму себе на заметку. Усилитель только хлопает в момент включения. Косяк, но не смертельно. блок питания для зарядки такой как у вас может быть очень плохого качества. Я купил такие и вернул за них все деньги. Мой экземпляр оказался полным гов...м, ток максимум 0,5А и нет стабилизации. Если интересно то посмотрите видео на моем канале. Надеюсь ваш лучше. По поводу первого блютус модуля. У него левый и правый канал каждый имеет свою землю и их нельзя соединять вместе. Если вы подключаете к нему наушники, то каждый динамик подключаем отдельно к левому и правому каналу + и-. Если к усилителю то берем плюсы с левого и правого канала, а GND модуля соединяем с GND усилителя. Вроде так. Вот вам на заметку очень дешевый, очень маленький и просто отличный блютус модуль со всеми плюшками (USB, карта памяти, управление, микрофон и т.д) подключай то что тебе нужно. ru.aliexpress.com/item/1-BT003-Bluetooth-4-2/32890385914.html?af=1673677&aff_platform=default&cpt=1555915444219&afref=&cn=42pqco1fmrnp0tckdqgqfouskrb30eoz&dp=v5_42pqco1fmrnp0tckdqgqfouskrb30eoz&cv=25560886&pvid=bfd0339d-dee4-4bc9-bcee-7fb62079d556&sk=ccfBY4yg&aff_trace_key=b012cef1eeaa4c08a42766fdf21a3a59-1555915444219-05962-ccfBY4yg&rmsg=no_replacement_pid_sid_whitelist&scm=1007.23534.124736.0&terminal_id=5ff402368d1648acb3505bb75fbe5b72 Удачи вам, и успехов во всех делах.
@@VGBSpeakers Пожалуйста. Жду новых "шедевров" от вас. Может пора переходить на более крупный калибр (3-4 дюйма)? Там все будет мощнее и интересней. После ваших колонок, на свои самодельные смотрю с недовольством. надо учиться делать такие красивые корпуса как у вас...
very nice design but MDF and waterproofing really dont go together. MDF is gonna absorb moisture when it comes into contact with water, with or without paint. the box will deform pretty soon if it comes into contact with water. using wood would be better.
Man sealing that speaker plays major role in getting strong bass out of it which you did perfectly 👌 very quality build 👍
Jajaja es increíble el sonido que logras con esa configuración, podrías compararlo con algún altavoz bluetooth reconocido como jbl charge 3 para tener un punto de referencia... Excelente video, saludos.
so how are you making the cuts in the wood and whats the thickness and/or material?
The bottoming out of that passive radiator though 😍
IKR 🤭😍
bro speaker is good but the bass radiator is want to go outside of the box
you build a Golden thing.
Я сделал колонку из тех же запчастей, но заменил усилитель, который уже был с bluetooth и получилось неплохо, не так, как на видео, но тоже хорошо. Корпус я взял пластиковый, остался от старого музыкального центра, а именно голосовик, тот что в центре стоит. Пассивка не так сильно двигается, как на видео, но звук лучше, чем у моей нынешней
Wish I had one of those of your creations bro .. cause I like it so much ..
The passive radiator is nearly passing out xD I would add a second smaller on the top or something
haha but no its alright
24:20 wft camera effect
Wowwwwww...
Super duper basssss
Beter than JBLgo 2
How long battery life sir?
Nice build
Bass flex
And its awesome to see that its moving around it self because of the powerful bass
And bouncing around
Songs used
Triboss-aquadrop
Triboss-dumb
Feel the bass
Hahaha
Hello VGV, first of all, CONGRATULATIONS, second I tell you that I have seen all the videos of the speakers that you have done and the truth is that everyone is great, you make it look so easy to make them that I really want to make one, especially the latter speaker that you did I liked and I would like to replicate it. I have a question and a suggestion, the first is how much or how thick is the table you use? Another question I have is what is the width or how much does the speaker measure from the frete to the back or the back? and the suggestion that I have personally is if you could make a video about how the suitch led connections are made ?.
Well again CONGRATULATIONS and Thanks for sharing your projects and the time you spend to show us how they are made. No more I wish you many successes in all your projects and your daily life. Receive a great greeting from COLOMBIA.
I remain attentive to a prompt response to my request.
Thanks for great comments.
thickness 10mm
from the speaker to the back panel is about 3.5cm
for led connection you can see in my next video.
Hello VGV, thanks for answering my question, I assure you that I will be very attentive to the next video you upload, Thanks for sharing.
if there will 2 passive radiator speaker will not vibrate
Hey a Question. The amp curruent is round about 2 amp. How long can the battery play music. I think 3 hours. And how long do you charge the battery ??
Good build quality, audio sound & portable👍👍👍
21:41 like
your are going on drive and 12 inches woofer punching in the back
you Nailed it
woooo
Why you didn’t place 2nd passive radiator? Passive radiator can be outside the speaker!!!!!
Where i can placed it can you show me?
..... if the angles were larger, then the side could be
2:46 вы на каком станке обрабатываете? Какой толщины мдф?
Basically a jbl charge 3?
I'm new in DIY speakes. 3S 40A BMS, 40A is total A for 3 batteries or 1? Example 3 of Samsung 35E 18650 Baterai Li-ion 8A 3500mAh 3.7V total of 24A. Or 3 of Efest Purple IMR 18650 Li-Mn Battery 2600mAh 3.7V 40A total 120A. Pls advice my pla using 3 baterries
First time you did a good speaker!!! Gret, good work, congratulations!!!! 💯💯💯🔥❤
16mm LED Push Button Switch ip67 used voltage?
12v
Go Speaker 2.1 with active sub and passive membranes :)
Could this be done with a 40 watt speaker and amplifier
I want this one so bad.. 😍
Your the best on RUclips
How don't you have any problems with bluetooth and amplifier supplied by one battery? I thought it is needed to use DC-DC isolated module like B0505S-1w
Oddly satisfying but that bass radiator flex tho
Man i really wish to build that speaker. But i dont know how to wire it because i dont see a wiring diagram. Could you please make it? Thank you
found it, but where do i connect the batteries to?
I am going to make a speaker like yours
is the bass deep?
What kind of drill is that? That pen sized one, can you drill denser materials with it or metal?
www.aliexpress.com/item/Cordless-Rotary-Tool-3-6V-Li-on-Engraving-Pen-DIY-Wooworking-Carving-Polishing-Rechargeable-Engraver-Dremel/32856113688.html?spm=2114.search0604.3.1.c173333eBZNZ9w&ws_ab_test=searchweb0_0,searchweb201602_10_10065_10068_319_10892_317_10696_10084_453_454_10083_10618_10304_10307_10820_10821_537_10302_536_10843_10059_10884_10887_321_322_10103,searchweb201603_50,ppcSwitch_0&algo_expid=20afd1e5-b230-4f26-998c-b837485a7318-0&algo_pvid=20afd1e5-b230-4f26-998c-b837485a7318&transAbTest=ae803_5
awesome i like the configuration you are using!
can you make another video were you can describe every part you putting together eg speakers. or just drop the thing that need to make a complete mp3 speaker.
No ground loop problem ?
What was the problem with the 1st bluetooth module ?
Не смотрел. Но лайк уже поставил )))
Cómo siempre los mejores parlantes
Nice nclosure, I think it might sound beautiful with other types of music.
I like your choice of music,
Can you name some of your music sources please, One song was like gate crasher style, mean az
Tha vluethut dhevhise is reedy to phair!!
Tha vluethut dhevhise is koonektedha sucsheshpuley!!😁
te compraria uno sin pensarlo excelente trabajo y calidad de audio (good job)
Ohman. You are insane. 👏👏
That's an awesome device the one you put together! Can I build a single speaker using the same electronics, or should I use a specific one for a single speaker? Thanks
Thanks. Yes of course you can use same electronics for single speaker.
Nice the front woofers doest move alot only the pr
Hello, what should i buy? The red or the blue one from tpa3110 amp board
hello. I have red and blue but I tested just red tpa3110. i dont know which the best. sry
no problem, i will buy the red one :)
Keep making, wait, but if I were to ask for one, how much would I be charged?
Wooowww extreme subwoofer nice
what type of switch do you use?
Bine frate ...👌👌☝👉💪💪
I want to do it. But i didnt know how to make the wood. I didnt have wood like that and didint have wood cutter.
Te best speaker to build ;D
is that mdf board???
Оставляй пожалуйста все песни в описании или в закреплюнном комментарии.
Hey could you give me link to those butons? Thanks bro
What music at 15:00?
why seperate bluetooth module and not all in one? is it because all in one have bad start sound? and more distortion
No because all in one i can't find 2x15w. There are exist all in one but 2x25w and i have 10w speakers and this module have big size pcb.
@@VGBSpeakers ok! i have found all in one .15w x2 on aliexpress last week
@@aarriikknn33ll can you give me the link?
@@VGBSpeakers yes wait 5 minutes
@@VGBSpeakers m.nl.aliexpress.com/item/32908212954.html?pid=808_0009_0101&spm=a2g0n.search-amp.list.32908212954&aff_trace_key=60689e67b9974120b58a22f432e7f635-1551999623746-06023-UneMJZVf&aff_platform=msite&m_page_id=3633amp-1JLOAPU9SP9SMjWDg033Tw1555796054095
here i have bought mine too
Beautiful and great sound
Вот это супер. Теперь все как надо. Колонка выглядит просто отлично! Начинка тоже правильная. Ваша идея с кнопками это просто огонь! Век живи век учись. Все гениальное просто! Кусочек тонкой резины и все. Очень аккуратно смотрится и еще и водонепроницаемо. Обязательно возьму себе на заметку. Усилитель только хлопает в момент включения. Косяк, но не смертельно. блок питания для зарядки такой как у вас может быть очень плохого качества. Я купил такие и вернул за них все деньги. Мой экземпляр оказался полным гов...м, ток максимум 0,5А и нет стабилизации. Если интересно то посмотрите видео на моем канале. Надеюсь ваш лучше. По поводу первого блютус модуля. У него левый и правый канал каждый имеет свою землю и их нельзя соединять вместе. Если вы подключаете к нему наушники, то каждый динамик подключаем отдельно к левому и правому каналу + и-. Если к усилителю то берем плюсы с левого и правого канала, а GND модуля соединяем с GND усилителя. Вроде так. Вот вам на заметку очень дешевый, очень маленький и просто отличный блютус модуль со всеми плюшками (USB, карта памяти, управление, микрофон и т.д) подключай то что тебе нужно.
ru.aliexpress.com/item/1-BT003-Bluetooth-4-2/32890385914.html?af=1673677&aff_platform=default&cpt=1555915444219&afref=&cn=42pqco1fmrnp0tckdqgqfouskrb30eoz&dp=v5_42pqco1fmrnp0tckdqgqfouskrb30eoz&cv=25560886&pvid=bfd0339d-dee4-4bc9-bcee-7fb62079d556&sk=ccfBY4yg&aff_trace_key=b012cef1eeaa4c08a42766fdf21a3a59-1555915444219-05962-ccfBY4yg&rmsg=no_replacement_pid_sid_whitelist&scm=1007.23534.124736.0&terminal_id=5ff402368d1648acb3505bb75fbe5b72
Удачи вам, и успехов во всех делах.
Спасибо за советы и за ссылку.
@@VGBSpeakers Пожалуйста. Жду новых "шедевров" от вас. Может пора переходить на более крупный калибр (3-4 дюйма)? Там все будет мощнее и интересней. После ваших колонок, на свои самодельные смотрю с недовольством. надо учиться делать такие красивые корпуса как у вас...
very nice design but MDF and waterproofing really dont go together.
MDF is gonna absorb moisture when it comes into contact with water, with or without paint.
the box will deform pretty soon if it comes into contact with water. using wood would be better.
Wew i like it good spiker giwe it to me 🤗😅👍
Perfect 👌😎
Any square wood type. With Just one speaker.
Лучший!!!
Better than JBL. Likeeeeee
А сколько будет стоить такая колонка?
You got to let me have this one
18:49 name music??
Superrrrrrrrrrrrrrr klas
Do a diy neck speaker
Yay new video 😃
Sell a kit😁😍
How did you connect the batteries to each other?
I used 3 18650 battery and I get 12.6V. I connected 4.2v - +- +- +12.6v
@@VGBSpeakers and with only 3 18650 the autonomy is good? How long ?
@@alexplosif170 about 5-6 hours
Then there goes that girl again... hilarious accent...lol...
Скажи пожалуйста трек первой песни которая играет на колонке)
ruclips.net/video/pAvGsSI_cu8/видео.html
Mega basss!!!! :)
awesome work, thanks for sharing, keep it up
Con loa này bán thế nào ad
Omgg this is beautiful, give me 😅
İf it had one more passive radiator at bottom it would be perfect
Nice bro
Good job men
Very good speaker
Bass is better underwater lol
Yeah lol
Топ! Афигенно валии!!
Boss how much??..
bro do you sell this
Back ground music is much better than you played
You rock 👍
Из чего ты делаешь корпуса?
MDF
*very good*
Bro can you make jbl go model speaker
а вы продаете свои произведения искусства?
Пока нет
Это просто колока ОГОНЬ.😉😉😉😉😉😃😃
why 360p
1rst 15-30min its 360p then 1080p 60fps.
16:54 music name please ;D
ruclips.net/video/ZznB7UBeIx4/видео.html
Passive radiator RIP
Bisakah saya membelinya
Exelent woro bro¡😎👌🏻
Better bass inside water
Holy Shit,awesome work
creo que me hare 1 gracias por compartir