Cheap Vac Former V
HTML-код
- Опубликовано: 15 сен 2024
- Will it work? Of course it will and so will yours.
Don’t doubt what you can do.
“Don’t Burn Yourself”
Need tips on Kydex™ holster building? Drop a comment below and we’ll see what we can do!
All content produced by ACH are 100% unbiased reviews and opinions. Follow ACH:
Instagram - / alameda_custom_holsters
Website - www.alamedacus...
Amazon Links for Useful Items:
Polymer Clay: amzn.to/34niVMi
Robinair Pump Oil: amzn.to/2Gv7xpD
3M Particulate Filter: amzn.to/34jVaVn
Mechanix Wear FastFit Gloves: amzn.to/2SkeagZ
Quick Draw Holster Lubricant & Protectant: amzn.to/3iqNN3D
Thermoid R7 Fuel Hose 3/16" x 25': amzn.to/3isaXXg
Pex Tubing Cutter: amzn.to/3itlrFL
VELCRO Brand Heavy Duty Tape with Adhesive: amzn.to/36r0adF
Stabilo 8052 All Pencil: amzn.to/33lHha8
ScotchBlue Sharp Lines Multi-Surface Painter’s Tape: amzn.to/30sv2GU
6MM 1/4" x 12 x 12 Baltic Birch Plywood - B/BB Grade: amzn.to/30vrlAm
Ceramic Flat Iron, 1 Inch: amzn.to/3l5rWjY
Pencil Flat Iron: amzn.to/3ioXMGH
Grifiti Band Joes 2 Inch 20 Pack Assorted Colors: amzn.to/3nasMOc
80/20 Inc, 1503-LS, 15 Series, 1.5" x 1.5" Tri-Slot x 72": amzn.to/2Sk0H8X
Like & Subscribe!
Yeah, I think now that my design is where I want it, the vac former is going to be necessary for the consistency I want. Ty sirs.
Thanks for this series Tony, awsome information!!!!!
Kevin Carver anytime brother 👊👊
Excellent info as usual. Surge tank? Chocolate is in the mail
My thoughts exactly on the surge tank. I'm wondering what the difference is or what the purpose is for adding one
Great diy build !
Rusty McKnight 👊
SURGE TANK? What are surge tanks for and what's the difference between with or without one?
Buck cherry playing... Haven't heard that song in years.
Too bad we learn this a few hundred dollars later.. great job as always Tony. 👍
The ArmzMen I had to update it from my first vac video, plus this is cheaper.👊👊
Hey Tony is that pump good enough to start with, and would love a video doing a dual calor holster with vacum thanks for all you do.
Great build! I was wandering last night if hard waxing the board would help to make a better seal or perhaps a coat of poly urethane since the wax could get hot under the kydex. What is your thoughts on this?
Von Bottorff urethane might work, the hot kydex isn’t in the press very long, pretty sure it would be fine.
Alameda Holsters That was my thought as well. If you use wood to make the press it would seal the pores on the wooden surface. Thanks.
Ty awsome video
What kind of frame is that you use to make a seal?
80/20 frame, but any cheap picture frame will do the job, less money
can you recommend a good vacuum to use.thank you
Michael Casertano Robinair 8CFM
@@alamedacustomholsters Thank you
Where did you put the air holes at on this?
Drill hole in the center
Where do you source your silicone membrane from? Thanks for the tips, great content
I sell it on my website
alamedacustomholsters.com/
How much millimetres is the silicone membrane?
I noticed that you don’t seem to have a lot of oil mist from your pump, I have the same pump and after it sucks down all the way I have a small cloud going on. Any suggestions? Am I doing something wrong?
dontdiewonderingjm what pump are you running?
Alameda Holsters I’m using the same harbor freight 2.5 vac pump
dontdiewonderingjm I get oil mist from both, you are not doing anything wrong, I need to either vent it outside or make a filter or buy a filter.
Alameda Holsters I’ve looked in to making one, just wanted to make sure I wasn’t missing something. Thanks man! Love the channel , great content!!
dontdiewonderingjm 👊👊
alamedacustomholsters.com/Heavy-Duty-High-Temp-Vacuum-Former-Silicone-Membrane-membrane.htm