Just completed job with your video on my 2015 Veloster, bought the switch with camera from that huge online retailer for $15 after dealership said $620. Thank you very much for the video!
From the prior post I take it the video helped them with the camera variation. There was an additional post from someone else saying they managed to replace the switch but the camera didn't work though there was no explanation as to why that was. I would think the camera is just an extra connector that needs to be disconnected and reconnected in addition to the switch but I am only speculating. My particular Veloster does not have a rear view camera installed which is why it is not included in the video. If you are not confident you can replace the switch with the camera without specific instructions I would suggest not trying it. You can also see if there are additional videos on RUclips which are specific to Velosters with a rear view camera.
@@Ragingeek Yeah, I think I'm just going to buy a whole circle piece and replace that...I think that'll just be easier. That way I don't have to worry about the camera not working. Thank you, this video will help (and has already helped!).
Bought my 2013 Hyundai Veloster and this was one of my biggest problems, trunk wouldn’t open. Bought my part from Amazon and just got it fixed in 30 minutes! Thank you sir
Same! They quoted me $300 just for the latch that cost me $10 on Amazon. Tack on $95/hr for labor and we're at $400 for a half hour of work. HARD PASS! I can do it myself, thanks to you! 💁♀️
Thank you so much! I’ve been just using the stupid latch for nearly 2 years because I’m lazy and don’t know anything about working on cars. I’ve even had the replacement part sitting in my car the whole time too. Finally decided to get it fixed and I followed this video and the instructions were perfect! Thought it’d be way harder. Thanks so much for this video!! So silly it took me this long to get it done but I finally have a working trunk again thanks to you! woohoo!!!!
Saved so much money with this video! Was able to fix it under an hour. The only downside is the camera didn’t work but I’m totally okay with that. Thanks!
Thank you for this, this is the most informative video I've watched. I wasn't sure how to open the hatch cause my button on my key doesn't work for some reason. They wanted over $1,200 at the dealership and I got the switch on Amazon for $16.97.
Yes sir, thanks so much for the video , just did the one on my wife's veloster. Only thing I did different ma ybe, is the the two bluish , green clips , I could not depress them and pop them out that way,.. I just use a pry tool that was in the kit and popped that back assembly out from the back of the car. Amazon was gonna be slow to get the pry kit but not the switch , so I ordered the switch and the bag of the yellow clips from amazon and picked up the plastic pry set from auto zone. Dorman kit with maybe 6 or 7 pieces for maybe 12 or 14 bucks I think. Again thanks much for your video, it helped tremendously!
Gracias por subir este video,estoy por empezar a cambiar la pieza y no tenia el conocimiento,ahora voy mas confiado a lograrlo.Dios te bendiga grandemente.
This should've been a recalled item. Shame on the company. Even the service department today told me that they see this often. They wanted to charge $429 for parts and labor!!! (Tulsa Hyundai)
@@sabeelsyed8389 I can't make any guarantees as I do not have a rear-view camera on my Veloster but if I had to guess, I would say the part number is the same. I am also going to guess you just need to disconnect the camera before you can remove the switch assembly. Again, I do not have a rear-view camera so I am just assuming that is what needs to be done, no guarantees on the advice. Though, I hope this helps. 🙂
You need to squeeze the flaps on the blue tabs so it will fit through the hole and allow the latch assembly slide out. This needs to be done after the other black bolts are loosened.
Just completed job with your video on my 2015 Veloster, bought the switch with camera from that huge online retailer for $15 after dealership said $620. Thank you very much for the video!
Welcome.
Oh, I guess it's a different set up when there's a camera involved?
From the prior post I take it the video helped them with the camera variation. There was an additional post from someone else saying they managed to replace the switch but the camera didn't work though there was no explanation as to why that was. I would think the camera is just an extra connector that needs to be disconnected and reconnected in addition to the switch but I am only speculating. My particular Veloster does not have a rear view camera installed which is why it is not included in the video. If you are not confident you can replace the switch with the camera without specific instructions I would suggest not trying it. You can also see if there are additional videos on RUclips which are specific to Velosters with a rear view camera.
@@Ragingeek Yeah, I think I'm just going to buy a whole circle piece and replace that...I think that'll just be easier. That way I don't have to worry about the camera not working. Thank you, this video will help (and has already helped!).
Bought my 2013 Hyundai Veloster and this was one of my biggest problems, trunk wouldn’t open. Bought my part from Amazon and just got it fixed in 30 minutes! Thank you sir
That's great, I am glad this video helped you out.
U order the switch and everything from Amazon?
I’m on day 2 and I haven’t even removed the pnel
Do you have link for the party bought?
Do you have the link for the party bought
Thanks for making this. Saved me a few hundred dollars for about 30 minutes off my time. Worth it.
Knowing it helped you makes it worth it for me! Thanks for watching!
Same! They quoted me $300 just for the latch that cost me $10 on Amazon. Tack on $95/hr for labor and we're at $400 for a half hour of work. HARD PASS! I can do it myself, thanks to you! 💁♀️
Thank you so much! I’ve been just using the stupid latch for nearly 2 years because I’m lazy and don’t know anything about working on cars. I’ve even had the replacement part sitting in my car the whole time too. Finally decided to get it fixed and I followed this video and the instructions were perfect! Thought it’d be way harder. Thanks so much for this video!! So silly it took me this long to get it done but I finally have a working trunk again thanks to you! woohoo!!!!
My pleasure, I am glad everything worked out great.
Saved so much money with this video! Was able to fix it under an hour. The only downside is the camera didn’t work but I’m totally okay with that. Thanks!
Glad this helped.
Thank you for this, this is the most informative video I've watched. I wasn't sure how to open the hatch cause my button on my key doesn't work for some reason. They wanted over $1,200 at the dealership and I got the switch on Amazon for $16.97.
Glad to help and thanks for watching.
@@Ragingeek you definitely have a new subscriber from me
Thank you so much! Ordered part from Amazon and installed myself using this video. Fixed! Immense savings!
Glad the video helped, thanks for watching.
Yes sir, thanks so much for the video , just did the one on my wife's veloster. Only thing I did different ma ybe, is the the two bluish , green clips , I could not depress them and pop them out that way,.. I just use a pry tool that was in the kit and popped that back assembly out from the back of the car. Amazon was gonna be slow to get the pry kit but not the switch , so I ordered the switch and the bag of the yellow clips from amazon and picked up the plastic pry set from auto zone. Dorman kit with maybe 6 or 7 pieces for maybe 12 or 14 bucks I think. Again thanks much for your video, it helped tremendously!
Glad everything worked out and thanks for watching.
@@Ragingeek Also meant to mention , great idea to get the yellow upholstery clips. I had two stick and replaced them. Thanks again!
Gracias por subir este video,estoy por empezar a cambiar la pieza y no tenia el conocimiento,ahora voy mas confiado a lograrlo.Dios te bendiga grandemente.
Mi placer, buena suerte en la reparación.
Been looking for this video for sooo long. Thanks,
Glad it helped, thanks for watching.
Thank you so much! I will be doing this hopefully this weekend!
Thanks for watching!
Thank you!
My pleasure.
Thank you for showing your video it's been very helpful I have a 2013 had the same
Problem 🍺
This should've been a recalled item. Shame on the company. Even the service department today told me that they see this often. They wanted to charge $429 for parts and labor!!! (Tulsa Hyundai)
Also, thank you so much!
@@johnjenkinsmusic1 Glad I could help.
Thank you for showing this video you've been very helpful🤗
Thanks for watching!
Broooo I changed this and still have this problem this will be the second time for me to fix this problem
Are you using an OEM or third-party part? What exactly is going wrong?
Ty
Welcome!
Muchas gracias por TU video todos los Demas videos solo disen como renplasar El switch de la cajuela
great video man.
Awesome, thank you so much for sharing 😊
Welcome.
Thank you sir
how to get the parts
Can easily find a new and inexpensive replacement on eBay. If I remember correctly mine was around $12.
What size are the clips? 10mm?
This is the part number, Hyundai 8231538000. If you go on eBay you will see a number of OEM and aftermarket listings.
Where did you buy the switch from ?
eBay, should come up under "Tailgate Release Switch for Hyundai Veloster 2012-2017" when I bought it was just under $20.
hey what about the latch itself? (part #81230-2V000 ) is it unplug and 2 bolt?
Just saw this, yeah that looks like the right part number.
Where do you buy the replacement clips? What are they called :)
Do an Amazon search for part Hyundai Kia 82315-38000. They have OEM or generic brand various size bags of yellow clips for about 10 dollars.
@@Ragingeek thanks heaps!!
Where did you buy the yellow clips for the inside cover panel?
Try eBay, they should be there, if not possibly Amazon.
Can you please mention the part number. I’m trying to order but I’m really confused.
81230 2V000
Just to specify..i have a 2013 hyundai veloster base model. It does have a rear view camera. Can you pls mention the part number that will fit.
@@sabeelsyed8389 I can't make any guarantees as I do not have a rear-view camera on my Veloster but if I had to guess, I would say the part number is the same. I am also going to guess you just need to disconnect the camera before you can remove the switch assembly. Again, I do not have a rear-view camera so I am just assuming that is what needs to be done, no guarantees on the advice. Though, I hope this helps. 🙂
I appreciate u bro
I have this problem and also the drivers door actuator (keyless entry) anyone know where to buy the actuator? Stealer wasn’t a £240!!
eBay is worth a look.
Does anyone know what he means about “pinching” those blue things? I can’t get that part out
You need to squeeze the flaps on the blue tabs so it will fit through the hole and allow the latch assembly slide out. This needs to be done after the other black bolts are loosened.
Thanks - I somehow finished it successfully though 3x as long as average person 😂thanks so much for your video
@@ThePokerCats Good job!