Great video James! One tip on the wing fences for everyone...lightly sanding the part that will attach to the foam and lightly sanding the foam before you glue it will give you a much better permanent bond. Oh...and congrats to Alex!
Make sure before you put the tire glue on the rim that you clean the rim and the tire with alcohol or acetone. I also wear those blue gloves so glue does not get on my fingers. Then also you won't get any oil from your fingers onto the tire, that way the glue will stick better to the tire and rim. Happy flying!!
I have a way to make your epo foam models resist dust and look very shinny. Use ZEP floor wax. I use a good quality brush 1 1/2 inch. I brush on very thin coats and let them dry in between coats, about a hour. I usually put on 5 to 6 coats. Until it becomes very shinny. Guys at the field comment on how nice they look. Happy flying!
I started watching "Gold" by RCSparks Studio and I was super hooked. Those electric construction vehicles are sick! Real hydraulics systems? Yes please!
James, even if you are only flying models, you should know which colour navigation light goes on which wing! Port (left) wing has RED light and Starboard (right) wing has GREEN light. Easily remembered with the adage "No port left". The drink, port, is red in colour and we all know that.
For FPV it's too bad that the canopy is so blurry.. Should use carbon rods for structural loads, and use clear plastics like lexan for the cockpit windows 👍 Maybe in a later revision, let's hope😎👍
Hey James so I noticed you had each light on its own channel can you wire them all together and run them all on one channel or do they need 3 separate channels?
I remember when I first started looking at radio control models, I also called them toys. Someone said, they are not toys, they are miniature aircraft. It does sound much better and they really are miniature aircraft, when you think about it. And some are not so small or miniature. Happy Flying!!
Currently out of stock in the US, but more are on the way. visit the product page and click the notify me when back in stock button to be put on a list. You will get emailed as soon as it arrives and is ready to ship: www.motionrc.com/products/skynetic-bison-xt-stol-1750mm-68-8-wingspan-pnp-sky1043-001
The manual leaves a lot to be desired. Wrong size screw indicated for the landing gear installation. Missing details. I wish you had made this vid available a week ago. I contacted customer service for the right prop for right battery. THEY said big prop for 6s. YOU said big prop for 4s. So which is it?
Just use a Spektrum Rx. The AR630, (6 channel, so you will need two servo Y connectors to have enough plugs for all the lights.), has AS3X and SAFE already installed on it. This plane is PNP, so you have to install your own Rx anyway. Hope that is helpful.
There seem to be many small concerns on this aircraft. ... Slats that look more like air brakes .... look wrong designed? And you seemed very hesitant about the function of these. Are there major problems with production? Or maybe with the product? Because it is so late to Europe. . Would come in May and still stand "new coming soon" 🤔?????
Products tend to leave factories around the same time and traveling straight across the pacific to the US is always faster than meandering up to the EU. Its on the way
As soon as you said it doesn't come with a manual I wasn't interested anymore, because my build room has not got a computer in it, and I'm not running back and forth from one room to another...
Then you can go to your computer and copy the manual off the website from your printer and bring it back to your hobby room. Problem solved, happy building!!
Great video James! One tip on the wing fences for everyone...lightly sanding the part that will attach to the foam and lightly sanding the foam before you glue it will give you a much better permanent bond.
Oh...and congrats to Alex!
That's why I like motion rc, you guys demonstrate and construct your products
it really helps us novices.
Make sure before you put the tire glue on the rim that you clean the rim and the tire with alcohol or acetone. I also wear those blue gloves so glue does not get on my fingers. Then also you won't get any oil from your fingers onto the tire, that way the glue will stick better to the tire and rim. Happy flying!!
What are the size of the tyres,. Diameter and width and weight of please
I have a way to make your epo foam models resist dust and look very shinny. Use ZEP floor wax. I use a good quality brush 1 1/2 inch. I brush on very thin coats and let them dry in between coats, about a hour. I usually put on 5 to 6 coats. Until it becomes very shinny. Guys at the field comment on how nice they look. Happy flying!
I started watching "Gold" by RCSparks Studio and I was super hooked. Those electric construction vehicles are sick! Real hydraulics systems? Yes please!
I think I may have to pick this up for my 1st plane
James, even if you are only flying models, you should know which colour navigation light goes on which wing! Port (left) wing has RED light and Starboard (right) wing has GREEN light. Easily remembered with the adage "No port left". The drink, port, is red in colour and we all know that.
Just waiting for the time to build mine!!😍😍😍🤘🏻
Great video as always!
Quick connects is something I miss on Flightline and Freewing models. (Not that I have seen all of them)
THANKS FOR POSTING SIR
Cool build looks great
Just ordered one super pumped
Спасибо за обзор.
For FPV it's too bad that the canopy is so blurry.. Should use carbon rods for structural loads, and use clear plastics like lexan for the cockpit windows 👍 Maybe in a later revision, let's hope😎👍
We actually updated the model all current inventory has new clear windows 😉
@@MotionRC very good to hear! I didn´t know that. I want one now! :) Love Fpv bush flying! By the way, how much does the tires weigh?
Looks easy to assemble!!
Nice plane.
silly question, why does the smaller 4S batteries use the larger prop?
Hey James so I noticed you had each light on its own channel can you wire them all together and run them all on one channel or do they need 3 separate channels?
When I fill the tires with air, the air will leak out through the air nozzles. Is there something in the kit to plug the air nozzle.
WHY WILL YOU USE THE SMALLER PROP WITH 6S ?
The wheels look a pain, and glue.. Mess way to do.. Shame...
Unreal, brilliant build an what a Toy!
$399, bargain.
Beauty MRC.
I remember when I first started looking at radio control models, I also called them toys. Someone said, they are not toys, they are miniature aircraft. It does sound much better and they really are miniature aircraft, when you think about it. And some are not so small or miniature. Happy Flying!!
HOW CAN I BUY ONE OF THESE???? I have looked everywhere for one!! Please help!
Currently out of stock in the US, but more are on the way. visit the product page and click the notify me when back in stock button to be put on a list. You will get emailed as soon as it arrives and is ready to ship: www.motionrc.com/products/skynetic-bison-xt-stol-1750mm-68-8-wingspan-pnp-sky1043-001
The manual leaves a lot to be desired. Wrong size screw indicated for the landing gear installation. Missing details. I wish you had made this vid available a week ago. I contacted customer service for the right prop for right battery. THEY said big prop for 6s. YOU said big prop for 4s. So which is it?
Big with 4S ...you overheat everything if you use the big prop with 6S
I’m hearing from a lot of people, this plane has major issues. Why don’t they fix it before going to market?
It's not a beginner plane or build
Yea those slats don't function the way real slats do. They're more of an air brake, real slats should slide forward to increase lift.
Yeah they move wrong. Don’t think at their deflected angle they would help any
Could this be converted to run a four cycle Glow engine,. Say maybe a 0.91 or 1.20. 15to22cc
Anything is possible but this wasn't made with any intention of gas engines being installed.
The tail wheel bag had a zip lock and you tore that off? Lol
haha, not planning on putting it back
Do they have floats ?
Yes there is an optional float set 😉
👏👏👏👏
Man I want one so bad. My luck by time I can afford it it will be no longer available.
Does Motion RC have a SAFE system like Horizon Hobby?
Just use a Spektrum Rx. The AR630, (6 channel, so you will need two servo Y connectors to have enough plugs for all the lights.), has AS3X and SAFE already installed on it. This plane is PNP, so you have to install your own Rx anyway. Hope that is helpful.
@@capnpete1154 I was wondering if that would work. Thanks for the help!
@@papapsadventures6119 You will need a Tx capable of forward programming to set up that feature on your Rx. Good luck.
There seem to be many small concerns on this aircraft. ... Slats that look more like air brakes .... look wrong designed?
And you seemed very hesitant about the function of these.
Are there major problems with production?
Or maybe with the product? Because it is so late to Europe. . Would come in May and still stand "new coming soon" 🤔?????
Products tend to leave factories around the same time and traveling straight across the pacific to the US is always faster than meandering up to the EU. Its on the way
Floats? Why no info?
Don't have them yet. Not sure when they will arrive but they are coming down the line. Will make a video then
@@MotionRC thanks
As soon as you said it doesn't come with a manual I wasn't interested anymore, because my build room has not got a computer in it, and I'm not running back and forth from one room to another...
Then you can go to your computer and copy the manual off the website from your printer and bring it back to your hobby room. Problem solved, happy building!!
@@idyh8391 So I get to print off the manual, Great idea if you buy me a printer
@@GeorgeCooper_LoneWolf Don't forget to buy some paper too 🤣
Does the plane come with a gyro?