Thank you for sharing, I repeat every video. I take to much knowledge in this video. 1. How to mount racket 2. Horisontal is 10% higher tension 3. 5 top of string back to normal tension 4. How to knot stings... so thank you very much yonex. I love yonex from Indonesia 🇮🇩
he should show us more details on mounting the racquet... most of the stringers have no problem on pullig the strings, however the mounting step yes. the camera man should shoot from Lawrence's angle in order to show us how to not too over-tighten the racquet when mounting
Hi, great video, I was always told the main strings are power and cross strings for control, yet you say the opposite? The original 2 piece or hybrid stringing patterns from tennis would normally have synthetic on the mains and GUT on the crosses for the reasons I said, can you clarify this please? Cheers
Doing the job for 35years is a great achievement in itself, imagine the knowledge the muscle memory he's having... I'll get my racket gutted by him after becoming the best player
i thought for aerobite the main string tension is higher than cross string, but you said in the video that main was 24lbs and cross 26lbs. any comments guys?
Farras when you string the main, it is straight, so the tension is less than crosses. When you weave the cross string in and out, the tension in mains goes up as the string is no longer straight, it's being pulled by the crosses, hence the result is the cross and main should be similar at end. Hope you understand.
I gave my astrox 100zx to string 24lbs main and 26lbs cross. Just by the time got home, the head was elongated. What would be a perfect solution for that?
How tight do i have to mount the racket? Cause some people say it has to be a little loose, but other people say it musn't be moving. I have the idea my rackets are a little disformed, due to not properly mounting it. Anybody tips?
In some videos the cross string is stringed either from the bottom or the top. Why is it not done from the middle, like it is done with the main string?
It is possible to start the crosses from the middle but it takes longer and in order to retain the correct head shape it is best to start from the bottom (throat) and not the top. In tennis the crosses are normally strung top down but badminton, again because of the head shape is bottom up.
Is it normal for badminton rackets to change shape a bit after stringing? After stringing (26lbs x 26lbs), I found my Yonex 100zz badminton got a bit elongated and narrower in sideways (about 3~4 mm). Is is normal?
The amount of times I have issues with blocked holes by a post so you cant even get a pair of pliers in to help. Tugging, pulling up, pulling down and then the string snaps.
If you buy 200m of string it'll be around 5-6 dollars for each racket, but if you use a 1 string set like him it'll be around 8 dollars. So you save money by buying the big role of string in the long run.
Not sure which country you are from but the ERSA are starting to roll out some badminton certification courses. The syllabus is now ready and the first round of testings have taken place in Taiwan.
@@accessdenied2010 Yonex have run seminars in various countries, generally in conjunction with major events at which the Yonex Stringing Team have been working, but there is no structured progamme of courses.
I just realised after rewatching this video his cross string on the side of the racket has overlapped his mains strings. Is that okay? Wouldn’t the cross string be digging into the mains potentially causing damage? You can see at 14:42
The side supports are way too close to the 3 and 9 oclock positions. Racket shouldn't be moving on the mounts either, you wanna give support enough to the frame without it shifting and causing warping or cracks. The first clamp isn't needed, it slows down the process, double pull then retension both strings.
![Chino Pacas - Smith (ft. Junior H & Fuerza Regida) [Video Visualizador Oficial]](http://i.ytimg.com/vi/BVK6k56X30Y/mqdefault.jpg)
Thank you so much for sharing with us Mr Lawrence‘s superb stringing technique which he has built up for 35 years. Full respect🙏
Thank you for sharing, I repeat every video. I take to much knowledge in this video. 1. How to mount racket 2. Horisontal is 10% higher tension 3. 5 top of string back to normal tension 4. How to knot stings... so thank you very much yonex. I love yonex from Indonesia 🇮🇩
35 years ! that's a lot of stringing experience . Salute to you sir !
That was so good and informative ,thanks Mr.lawrence .
I m also badminton stringr in yonex i love ur badminton string methods sir you are my role model Sir
he should show us more details on mounting the racquet... most of the stringers have no problem on pullig the strings, however the mounting step yes. the camera man should shoot from Lawrence's angle in order to show us how to not too over-tighten the racquet when mounting
Big thanks, very good manual.
I love Yonex from india
Iam following yonex stringing 4 knot method
NICE
Thank you Sir,for your an information.I am from Nepal.
Thank you, Sir.
Hi, great video, I was always told the main strings are power and cross strings for control, yet you say the opposite? The original 2 piece or hybrid stringing patterns from tennis would normally have synthetic on the mains and GUT on the crosses for the reasons I said, can you clarify this please? Cheers
Thank you for sharing. can i use the 4 knots system to do my AStrox 100?
Doing the job for 35years is a great achievement in itself, imagine the knowledge the muscle memory he's having... I'll get my racket gutted by him after becoming the best player
i thought for aerobite the main string tension is higher than cross string, but you said in the video that main was 24lbs and cross 26lbs. any comments guys?
Not sure about the Aerobite, though generally the Yonex guys tell to use about 10% more tension on the cross than on the main.
Farras when you string the main, it is straight, so the tension is less than crosses. When you weave the cross string in and out, the tension in mains goes up as the string is no longer straight, it's being pulled by the crosses, hence the result is the cross and main should be similar at end. Hope you understand.
I gave my astrox 100zx to string 24lbs main and 26lbs cross. Just by the time got home, the head was elongated. What would be a perfect solution for that?
Buy an original racket.
@@GarryChenYT ooh it's original genuine racket. It's just a manufacturing defect. Yonex agreed to replace it.
is that the four knots are same?especially for cross starting..
How tight do i have to mount the racket? Cause some people say it has to be a little loose, but other people say it musn't be moving. I have the idea my rackets are a little disformed, due to not properly mounting it. Anybody tips?
He literally explained this at the start of the video
Don't overthink it. Hand tighten it and the moment you feel a bit of resistance you're good
I really like the background music
😮Good evening 😅my darling how are you doing today sir how are you doing 🎉😅😅😅
In some videos the cross string is stringed either from the bottom or the top. Why is it not done from the middle, like it is done with the main string?
It is possible to start the crosses from the middle but it takes longer and in order to retain the correct head shape it is best to start from the bottom (throat) and not the top. In tennis the crosses are normally strung top down but badminton, again because of the head shape is bottom up.
Is there any difference between starting cross string from 9th hole and 8th hole?
You use extra string. Cuts into profits.
Do people actually lower the tension at the top ???
Luar biasa. 👏👏👏
I think he stringing million of racquets. 🙏🏻
Yonex zr 100 light.. How much tension it can take??
Please help
can u do a nearest video of the knote.....🙏
How many meters string do we need for stringing one racket in badminton?
10m
4.6m + 3.8m usually.
I wonder how it will be like when you replaec badminton string with guitar string
When is he tying the first knot of the cross section? And how?
After I pull the first three crosses against the start clamp, I tie off the bottom cross in hole no 6 using the same knot as for tying off the mains.
Who much price is stringing machine
How much do professional Yonex racket stringers get paid?
vangeti nikhil 25$ per racket
SINCE2551 it depends on the tension
@Alan Kakinami I mean do professional stringers get money salary from BWF?
@Alan Kakinami how much yonex pays you people?
@Alan Kakinami what is your occupation and where are you from? Are you from Japan?
Is it normal for badminton rackets to change shape a bit after stringing? After stringing (26lbs x 26lbs), I found my Yonex 100zz badminton got a bit elongated and narrower in sideways (about 3~4 mm). Is is normal?
You should stringing (26lbsx28lbs), after stringing, your rackets won't change shapeand the tension overall will be 27lbs.
I’ve ever not seen this racket.What is this racket?
Looks like nanoflare 800.
Thank you！
26 main and 24 cross
Gonna get one and try to beat players
The amount of times I have issues with blocked holes by a post so you cant even get a pair of pliers in to help. Tugging, pulling up, pulling down and then the string snaps.
Good evening sir how are you doing and how is work sir how are you doing today is 😢😂
👍
What is machine price
I think 11 to 12 lakhs
Is there anyone here who knows how much it costs to put a new string for the racket?
If you buy 200m of string it'll be around 5-6 dollars for each racket, but if you use a 1 string set like him it'll be around 8 dollars. So you save money by buying the big role of string in the long run.
nice video... where can I get a certification in Europe after some courses?
Not sure which country you are from but the ERSA are starting to roll out some badminton certification courses. The syllabus is now ready and the first round of testings have taken place in Taiwan.
@@marklawrence180 Does Yonex have any courses?
How to become a part of Yonex team?
@@accessdenied2010 Yonex have run seminars in various countries, generally in conjunction with major events at which the Yonex Stringing Team have been working, but there is no structured progamme of courses.
Which racket it that??😅
Yonex nanoflare 800 and the string is aerobite
Yonex Nonoflare 800
c'est super mais pourquoi vous commencez les cross par le coeur, c'est plus traumatisant pour la raquette de finir en tête
I just realised after rewatching this video his cross string on the side of the racket has overlapped his mains strings. Is that okay? Wouldn’t the cross string be digging into the mains potentially causing damage? You can see at 14:42
4 simpul tuh gini?
Why he isbusing aerobite in mains and aerosonic in cross
what is the tension/LBS ?
24/26
What string did he use?
Yonex aerobite
Yonex Aerobite
25 pounds
24 main
26 crosses
In Malaysia we have Halim Stringer who is the best stringer in the world.
Please Gift for me.yonex.😭😭
not good for very beginners
The side supports are way too close to the 3 and 9 oclock positions. Racket shouldn't be moving on the mounts either, you wanna give support enough to the frame without it shifting and causing warping or cracks. The first clamp isn't needed, it slows down the process, double pull then retension both strings.