99% of the people who post negative comments are nothing more than weekend warriors at best. I ride cuz it's fun period. I race cuz it's fun, if I did it for money I wouldn't be able to afford the phone I watch your channel on. I work for money, I like watching others have fun doing what I like as well. Your buddy's quad needs to be rejetted. Perhaps elevation change. Hard to believe he couldn't find 1 closer than 1300mi away. I like your videos buddy, keep doing what you're doing. Haters are gonna hate regardless.
@@banshee100 Gotcha, I knew there had to be more to it than just being able to find 1. I look forward to seeing you guys tearing it up together once it's dialed in.
Yes sir . You came to my state of Mi . And I run Iridium NGK plugs in mine , 8 if colder 9 when 65f or warmer . Check gap too for your engine build , very important . Check reeds make sure there flat and tight .Clean air filter is also important. Many people don’t think about it and it starts to choke it up some .
We like to enjoy the simple things in life and we're on a four wheeler there's no past and no future just the present I catch a lot of crap cuz I have a 2005 Yamaha Blaster Munchen the morons in my school with eight hundreds and 7 hundreds keep saying that they could whoop me all day but I have fun either way
@@banshee100 yeah I'm on channel I have a whole bunch of different stuff but one day I want to see if I can get one of those loud mouths to line up against me get my GoPro going in see if I can catch someone who thinks they're fast off guard and beat them or I can just have fun I think I'm just going to have fun
Well Said! I always thought u did it for fun. Some people just get worked up over the littlest things. Keep doing, what your doing. I love your videos!
Yeah don't listen to the negative comments its all about enjoying riding. From what i remember your main jets are more for 1/2 to full throttle and the needle and pilot jet is for low and midrange although they all work in conjunction to each other. My guess would be spark. How old is your stator and the plugs and do the plugs need a different heat for cooler temps outdoors....idk just figured i throw that out there
nice quads. still love the way yours looks over your buddies. just as much punch but more OEM looking. I had a moto4 100cc quad when i was a little kid, almost the same quad as that badger. just had my third kid, he will be riding just like my oldest two soon.
@@tugcleveland9568 check out my channel for some 85HP raptor 727 drags vs yfz450r. didnt have my 450 fully built or tuned when we took them before my buddy sold it for a zx10r. now my 450 is much faster
I would like one, a banshee also. I have a yamaha raptor 700r or was. It has a 105.5mm big bore kit with a plus 5mm stroker crank, Hinson clutch basket, efi controller freed up air intake and exhaust, plus 3mm valves intake and plus 2mm exhaust. Plus few other things I changed. At 75mph in 4th gear i can pull it up then shift into 5th and it's stupid fast. Idk top speed. Compression is 11:1 so I can use pump gas
Man can’t wait to go out riding this week just put a brand new clutch two over one carb and man those banshee sound soo good I have T fives on mine. Your just like me love to have fun with the banshee ripping up the pavement 🤙👍
Awesome cant wait to put my 4 mil short rod in. I bought it for 75$ with a bad crank bearing just gonna rebuild the whole crank. Cant wait for more power 😂
To me racing my buddy’s Matt or Michael it ain’t about winning or loosing it’s about the fun fellowship that’s made out there on the dirt or wherever we burn it up we literally help one another out on these it pretty cool when ones down there basically all down and you can bet we are all turning wrenches to get back on the bikes and to me that’s what it’s all about🤟
Hey man love your buddy’s banshee. Looks wise ! Yet dont touch yours. Love that your daughter is in video and rides i hope to do same with my lil girl this spring. If I was you I wouldnt give haters a second of your time thats what they want. KEEP HAVIN BRO I LIKE YOUR VIDEOS ALOT STILL !
I always hit Like before watching your videos. Like I've said in the past, I don't watch all of them, but I watch quite a few and have been for awhile, that being said, any of you want to know what's gone into his quad, scroll through his videos & about a yr/yr & a half ago maybe, he sat in the garage & went through all the receipts of what went into the building of the bike. It's worth the watch, very informative! Haters, just go away & get a effing life, we couldn't care less about what you think, just like all of those around you in RL. Get a clue.
@@banshee100 Thanks bud, I really enjoy your videos...You seem like a stand up guy. Cute daughter (not in a sick way, too bad these days you have to say that), glad she enjoys riding with her daddy. Sorry you have to deal with idiots but unfortunately that's the reality of the internet. Glad your buddy got a bad ass quad too, that will be fun for you guys. Keep on keepin' on!
If that bottom end loss you talk about in one of your other videos is a nuissance for you, you should try a 7mm crank. I had a 7mm stroker with 34mm carbs (which is what i think your buddy has- the pj's idle adjust from choke) cpi pipes, non powervalve cheetah cylinders, that thing had torque for days, the powerband would hit alot sooner than my 5mm stroker
It called the tores it's a thing wired into thethrottle and if trottel gets stuck wide open it boys it out so it must be jammed or something like that I'm not too sure go online and you to find out it happened to my blaster as well it's tors think it's some sort of electrical thing but I'm not too sure check it out And beautiful bikes it stops the throttle from getting stuck wide open and getting a kilt you can remove it but I'm not too sure I just left mine
Heck yeah man if that came from Detroit I bet Jesse McComas built it he owns Mac Daddy Racing in Attica Michigan he has the world fastest banshee to date. Check him out I just had him rebuild the bottom end in my kx 250.
You sure it’s not the case cap? Take it apart all the way and clean the 2 balls inside it they can stick together. Try draining the bowls by the screw if it sits for a bit or try starting with no choke on.
hellcat channel sorry gas cap. Mine was doing the same thing and the whole thing had to be disassembled and cleaned. The two ball bearings inside were sticking together slightly causing it to not vent.
tacticool commando I know that 1000cc blaster vibrates like a son of a bitch I building a yz490 drag mini bike right now going to be 1/8 mile asphalt runner getting gears cut now
Hey man i just bought a 99 banshee 350 its basically stock and runs like shit i paid 1200$ but im gunna rebuild it over the winter i may have a few questions in the near future, im considering selling my yfz
Good gracious im so butt hurt over the guys that got butt hurt from you getting butt burt over !??? Hell i done forgot what all this butt hurting is over because im having so much fun listening to these bad ass yammerhammers get down.oh yea one more thing before i forget let them dam banshee boys ride how they want and you ride your bashees the way you want see there all fixed. Now hurry up and make us some more of them there banshee vids we all love to see right.
It sounds like your jets or your throttle screw could be in to far maybe this has all happened to me maybe it can help you buddy my friend has two 400ex i have a 400ex that im building its gonna be sharp the motor is going to have a wisco crank and a je 440kit hot cam and maybe +1valves but the poit is man me and my buddy love to ride our 400s thier not crazy fast or really slow its all about having fun
Nothing wrong with having fun that's the point. You and your friend continue to enjoy what u do, be safe.
Thanks you the same
Nothing like seeing the front end coming up with you that high in the gears that just proves that your banshee is a Hoss
Yea buddy
99% of the people who post negative comments are nothing more than weekend warriors at best. I ride cuz it's fun period. I race cuz it's fun, if I did it for money I wouldn't be able to afford the phone I watch your channel on. I work for money, I like watching others have fun doing what I like as well. Your buddy's quad needs to be rejetted. Perhaps elevation change. Hard to believe he couldn't find 1 closer than 1300mi away. I like your videos buddy, keep doing what you're doing. Haters are gonna hate regardless.
Yeah we definitely drove a long way but he traded a Matco toolbox for straight up so
@@banshee100 Gotcha, I knew there had to be more to it than just being able to find 1. I look forward to seeing you guys tearing it up together once it's dialed in.
You know what blows me away about this quad is the bottom end , how you can pull it up lugging in 4th gear on a 2 smoke. Impressive sir impressive
Thanks man
Yes sir . You came to my state of Mi . And I run Iridium NGK plugs in mine , 8 if colder 9 when 65f or warmer . Check gap too for your engine build , very important . Check reeds make sure there flat and tight .Clean air filter is also important. Many people don’t think about it and it starts to choke it up some .
Damn! Nice intro! That thing truly is Mr nasty keep mixing gas and hauling ass buddy!
Lol nicr
I love these banshees. The sound and power is incredible. Im about to buy one next year
Crusher 0.o did you ever get it
Well done! You did a Great job building your bike! ! Awesome videos, Thank you! Joe
Your welcome friend
Forget all the haters theirs no need to explain to them . We ride bikes to have fun and enjoy life. They all can take a chill pill
We like to enjoy the simple things in life and we're on a four wheeler there's no past and no future just the present I catch a lot of crap cuz I have a 2005 Yamaha Blaster Munchen the morons in my school with eight hundreds and 7 hundreds keep saying that they could whoop me all day but I have fun either way
I learned to just block them man lol
Yea sir your correct
@@banshee100 yeah I'm on channel I have a whole bunch of different stuff but one day I want to see if I can get one of those loud mouths to line up against me get my GoPro going in see if I can catch someone who thinks they're fast off guard and beat them or I can just have fun I think I'm just going to have fun
Best to just have fun
Awesome video man. And blue banshee is nice. But definitely shows how quick Mr. Nasty really is. They both rip. 👍👍
Yes sir
Well Said! I always thought u did it for fun. Some people just get worked up over the littlest things. Keep doing, what your doing. I love your videos!
5:41 best sound ever!!!
Yeah don't listen to the negative comments its all about enjoying riding. From what i remember your main jets are more for 1/2 to full throttle and the needle and pilot jet is for low and midrange although they all work in conjunction to each other. My guess would be spark. How old is your stator and the plugs and do the plugs need a different heat for cooler temps outdoors....idk just figured i throw that out there
nice quads. still love the way yours looks over your buddies. just as much punch but more OEM looking. I had a moto4 100cc quad when i was a little kid, almost the same quad as that badger. just had my third kid, he will be riding just like my oldest two soon.
Kids are a blessing for sure
Love all quads. Love to see these 100hp quads against a 100hp D7 raptor like I own. For fun no disrespect.
Any vids of yours?
@@tugcleveland9568 check out my channel for some 85HP raptor 727 drags vs yfz450r. didnt have my 450 fully built or tuned when we took them before my buddy sold it for a zx10r. now my 450 is much faster
Your daughter is like me, don't take the helmet for snything. Definitely saved me alot
Alright brother just enjoy your ride, ignore the bad comments, trust me there is more people that have positive thoughts about this than the others.
Very true
I would like one, a banshee also. I have a yamaha raptor 700r or was. It has a 105.5mm big bore kit with a plus 5mm stroker crank, Hinson clutch basket, efi controller freed up air intake and exhaust, plus 3mm valves intake and plus 2mm exhaust. Plus few other things I changed. At 75mph in 4th gear i can pull it up then shift into 5th and it's stupid fast. Idk top speed. Compression is 11:1 so I can use pump gas
Man can’t wait to go out riding this week just put a brand new clutch two over one carb and man those banshee sound soo good I have T fives on mine. Your just like me love to have fun with the banshee ripping up the pavement 🤙👍
Yes sir fun for sure
That 100 hp will be a monster in the dunes
Great video!Glad ya included the lil lady's ride it is about the kids buddy
Awesome cant wait to put my 4 mil short rod in. I bought it for 75$ with a bad crank bearing just gonna rebuild the whole crank. Cant wait for more power 😂
wow, what a sick machine. Wish there was some of these in Sweden. I found 1 maybe 2 the past 5 years on the market here.. really rare!
THANKS
You guys are all some keep on having fun and family time because if you don’t enjoy life
It will pass you by fast
My name is Frank
God bless brother
God bless you also
Man those Banshees are fast 🤣 looks like a blast 👍 would love to take a blast on one of them . Awesome bikes
Dude @hellcat. Your banshee is bad ass... he was out in front on you and you still smoked him..lol...
Glad we are able to get out and do what we do awesome time as always
Yes sir
Matt did u find out wat was leaking oil?
RealTrapMusic yes was coming from right side of case just a small small leak but will be addressed thanks for your interest
If I switch on subtitles at 5:00 theres "[Music]" written there :D
To me racing my buddy’s Matt or Michael it ain’t about winning or loosing it’s about the fun fellowship that’s made out there on the dirt or wherever we burn it up we literally help one another out on these it pretty cool when ones down there basically all down and you can bet we are all turning wrenches to get back on the bikes and to me that’s what it’s all about🤟
Amen to that
Hey man love your buddy’s banshee. Looks wise ! Yet dont touch yours. Love that your daughter is in video and rides i hope to do same with my lil girl this spring. If I was you I wouldnt give haters a second of your time thats what they want. KEEP HAVIN BRO I LIKE YOUR VIDEOS ALOT STILL !
Thanks man just having fun
Real nice video a lot you Yamaha banshee my friend You friend got nice banshee too
Thanks man
Great video you guys.. continue to make Some more vids on. #Hellcat #banshee. Wana see yall on the fields or trails riding soon
Will do
I always hit Like before watching your videos. Like I've said in the past, I don't watch all of them, but I watch quite a few and have been for awhile, that being said, any of you want to know what's gone into his quad, scroll through his videos & about a yr/yr & a half ago maybe, he sat in the garage & went through all the receipts of what went into the building of the bike. It's worth the watch, very informative! Haters, just go away & get a effing life, we couldn't care less about what you think, just like all of those around you in RL. Get a clue.
Well said
@@banshee100 Thanks bud, I really enjoy your videos...You seem like a stand up guy. Cute daughter (not in a sick way, too bad these days you have to say that), glad she enjoys riding with her daddy. Sorry you have to deal with idiots but unfortunately that's the reality of the internet. Glad your buddy got a bad ass quad too, that will be fun for you guys. Keep on keepin' on!
Thanks man good comments
Good stuff, its all about having fun and that’s all that matters 👍
Yes sir
hellcat channel hit me up on Facebook messanger and I’ll send you some pics of mine. My dog is the profile pic
No question at all your quad is definitely 100 horsepower I've seen similar builds with the same results.
They roll out for sure
True sportsmanship
Yea buddy
nice looking machines
Good video Matt! Banshee looks fun.
Thanks man
still pops a 4th gear wheelie running not so good this quad is a pure animal enjoyed watching you 2 friends having a play about 👌
Thanks man
Bought a banshee and surprise it has a 4 mil in it Haha didn't notice the spacer plate when I went to buy it and nownima rebuild it the right way
how much would it cost for a little upgrade on my stock motor
Upgrade?
@@banshee100 yeah I was just wondering
After you finish your ride for the day let the banshee idle for a couple minutes and make you turn fuel off it stop flooding
If that bottom end loss you talk about in one of your other videos is a nuissance for you, you should try a 7mm crank. I had a 7mm stroker with 34mm carbs (which is what i think your buddy has- the pj's idle adjust from choke) cpi pipes, non powervalve cheetah cylinders, that thing had torque for days, the powerband would hit alot sooner than my 5mm stroker
Jumping or not, friendly racing, you can tell witch motor is hotter on either wheeler when your their!
It called the tores it's a thing wired into thethrottle and if trottel gets stuck wide open it boys it out so it must be jammed or something like that I'm not too sure go online and you to find out it happened to my blaster as well it's tors think it's some sort of electrical thing but I'm not too sure check it out And beautiful bikes it stops the throttle from getting stuck wide open and getting a kilt you can remove it but I'm not too sure I just left mine
You guys are cool. Like the southern accent.
Thanks man
Great video man,looks like fun to me.
Looks like hella fun toys
Heck yeah man if that came from Detroit I bet Jesse McComas built it he owns Mac Daddy Racing in Attica Michigan he has the world fastest banshee to date. Check him out I just had him rebuild the bottom end in my kx 250.
The front fenders look a bit high at the front on the blue one with the decals
Yeah the ATV came with them not home so they was just zip tied at the moment until we get the new bolts
Mr nasty ......... banshee and raptor best atv in the world
Ignore the haters man great vids i love your shee I have an 02 banshee they’re ton of fun what oil do use and what’s your ratio?
Maximum 927 32 to 1
That power band hit hard can’t wait to have mine doen
Love ur videos man
Thanks man
Great vid bro you guys are the best and i love your bikes sound I have a Cr125 and it screams to where do you live? I live in good ole wv
Damn, Matt went hard on the haters. lmao!!
Sometimes lol
@@banshee100 I laughed at the part where you were talking about people getting ass hurt
Good running bikes. They'll eat mine alive.
Nice vid we need more
Will do
So 2200 miles round trip must have got a killer deal
Y'all from East Tennessee?
That banshee is so badass but why is the footage still blurry
I'm not sure there
You sure it’s not the case cap? Take it apart all the way and clean the 2 balls inside it they can stick together. Try draining the bowls by the screw if it sits for a bit or try starting with no choke on.
Case cap?????
hellcat channel sorry gas cap. Mine was doing the same thing and the whole thing had to be disassembled and cleaned. The two ball bearings inside were sticking together slightly causing it to not vent.
Damn so you kinda made almost 8k sub with that banshee ! Congrats
Thanks
U should post videos of yall working on the banshees
We may do that
I had a drag blaster with a built yz250 motor it was fun never had a shee tho I have a 87 trx250r and a O7 ltr450
Ive had a few built blasters but currently have a banshee, 200 mild built blaster and 1000cc swapped blaster. Blasters are a blast lol
tacticool commando I know that 1000cc blaster vibrates like a son of a bitch I building a yz490 drag mini bike right now going to be 1/8 mile asphalt runner getting gears cut now
I've had 5 different blasters first ATV I ever owned
Definitely seems to run better with these jets
Yes not as rich
Bro are u located in ny I have a 404 vitos and a 421 serval would be nice to link up and do a review and some drags
Two awesome quads!! Enjoy em guys!
I love it it really doesn't matter all about having fun
True man
What gearing and tire size you running?
Stock
What oil did you use for breakin process?
Maximum 927
looks like a real blast
34mm pj carbs older but still good carbs
Yep I believe your correct
@hellcatchannel - Whats the difference between a cub & serval?
Port timing servalbin down low power cub is up top
@@banshee100 Thanks for answering my question. Cheers!
Where did you find it? eBay?
Do you have that pankake bearing to hold the clutch like that ? Or a few sec like you do is fine
I have it yes
I love your banshee and it’s very powerful, but there is one in my area for sale that dynoed at 116hp which would be insane-er lol
Most likely bigger motor no surprise there
No it was a cheeta cub
5hey make bigger cubs than 421
hellcat channel oh ok
Great video bro
Thanks man
No problem
I miss my banshee
Sounds like your flooding with the double pingle
Sweet love the banshees
Love the videos man
That serval did pretty well
Think that other 421 is running on pump gas
Ya its a serval
I haven’t seen a badger in a long time that great
Cool yea
What’s the top speed on your bike?
No clue
Well said bro, keepn it humble. Too many inflated egos out there need to stfu and go back to having fun
Yep well said
Nice
Yes sir
Those atvs are bad ass!
THANKS
I have a 2005 Yamaha Raptor 660r
Nice man
You guys were both spinning in concrete lol
Yes it was wet
Hey bro do you know any builders who could put a badass motor in a buggy / off-road kart?.
Where you located
In atlanta
No I don't
@@banshee100 doesn’t have to be local At all
Hey man i just bought a 99 banshee 350 its basically stock and runs like shit i paid 1200$ but im gunna rebuild it over the winter i may have a few questions in the near future, im considering selling my yfz
Ok
Have fun and be safe
We try to thanks man
You should buy a Polaris scrambler I got one and it rjps
I love the sound
Maybe I'll build a banshee now that's one I haven't built ive built 250s and an lt500
Good gracious im so butt hurt over the guys that got butt hurt from you getting butt burt over !??? Hell i done forgot what all this butt hurting is over because im having so much fun listening to these bad ass yammerhammers get down.oh yea one more thing before i forget let them dam banshee boys ride how they want and you ride your bashees the way you want see there all fixed. Now hurry up and make us some more of them there banshee vids we all love to see right.
Rite
What chain and sprocket do you have that hold up to that power?
Crotch rocket chain and just normal sprockets Factory
It sounds like your jets or your throttle screw could be in to far maybe this has all happened to me maybe it can help you buddy my friend has two 400ex i have a 400ex that im building its gonna be sharp the motor is going to have a wisco crank and a je 440kit hot cam and maybe +1valves but the poit is man me and my buddy love to ride our 400s thier not crazy fast or really slow its all about having fun
That is so cute
banshee is a beast I really want one after I trade my Polaris 06 500 if my dad let me