It needs to be said more often.. John, I ( and many others) GREATLY appreciate the benefit of your experience. THANK YOU for sharing your efficient clever methods.
Excellent John. I defiantly will be doing this. I have a very small shop and this will do wonders for my organization needs. Again you have saved me. Hope you feel better sir
John Heisz Awesome project John, hope you feel better, the rhythmic beat of the nail gun reminded me of a tune Jay Bates has played before as well lol. Hope yall have a great weekend.
I was looking for a slatwall design for the doors on a home-built a storage locker and yours looks easy to build, thanks for sharing! One thought on the hardware bins - you might consider adding an angled strip (ramp) behind the lip at each bin to make it easier to remove fasteners by hand.
A lovely, reconfigurable way to store and access your tools. Much more practical than my scrap plywood shadow board in the metal shop in Sheffield. However, just a small idea here: If the screw bins at the base were Loose sliding boxes, that you can just pop out for use, or move to a new position in the stack; it might aid work-flow. However perhaps you want to prevent them ending up all over the shop as before . As always, every idea can also compromise another requirement.
Hi John, Thanks for sharing this genius design and for all the quality content you provide for the woodworking community. You've taken the slatboard concept to a new level. The solution for preventing dust build-up is a great addition for solving that testy problem. I look forward to seeing it loaded with tools!
GRACIAS POR COMPARTIR LOS PLANOS CON NOSOTROS SE TE APRECIA MUCHO EL GESTO, desde mexico . ( thanks for sharing your plans with us, we really appreciated the gesture, from mexico).
I'm diggin' it John! "Super Tips" should be the name for all the helpful ideas You used; like 2 drywall screws to hold the plywood up temporarily b4 mounting, dipping the edge of plywood in glue, and spacing the bins shaped like a" U"... and so on! U Rock! When I grow up..... I wanna be JUST LIKE YOU!!! LOL..Have A Super Blessed Week! .....Gus (aka TheWoodWerker).
Brother You are the best! Learned a lot but am 82 today and know I have not been anywhere near as good all these years. A board and much I still like to do. Buckets and toolboxes I have many and have served me well. I am jealous of all your talents! Come to Australia and help me to get organised! Never too late or is it? Greetings Mate!
Nice, looking forward the followup to see how you use it. My wife and I have been trying to shake colds the last 3 weeks so you've got my sympathy there!
Hey John! As always, you have good ideas and present them clearly. I need something like this ( but not as big) in my little workspace, so I plan to build it soon. Now, here's an idea for one of your concise videos or perhaps a blog entry on your site: LIST the most common screws, nails and fasteners you often use. I think it could save your viewers many trips to the hardware store and hours of aggravation to know what hardware items you think are most valuable to keep in stock at all times. Thanks again for the great videos. I look forward to seeing your tool wall filled and hope to see how it improves your efficiency. My shop ALWAYS looks like yours at the beginning of the video, so I could use some inspiration!
Eye popping to say the least. What a piece of beauty. BTW; Someone I know lost 2 fingers recently not using a push tool with the saw... been in the business a long time too. Thank you for sharing. Be well. bye now
Thanks John me and my other half just bought a house my garage is two stories and insulated and heated. I have plenty of pegboard but, I like this idea. I might borrow it from you. Thanks for sharing.
Excellent presentation John - thank you for sharing it with the DIY community - nice selection of a Tango music as background melody, much better than "Heavy Metal" and "Rap" which often prevent the viewers for hearing the presenters' explanations. Thank you again, Ciao, L (ME, USA)
Thanks again, John, for another very interesting project. You really are a gift us (especially the many of us who don't usually post our appreciation). Hope your cold is better soon.
Really nice project. I like the fact that it's open, meaning, you can do pretty much anything you want with it. The video editing was really nice as well, liked the music.
John, it's an interesting project, and I am currently doing the same thing, for much the same reason(s) - can't find the tool, cluttered work-bench, too much stuff on a shelf or in a drawer, etc. The thing is that I am building a French Cleat system, and, while it is only partly completed, I am already finding it useful, especially as I have attached a removable mini-system to my workbench to hold the tools, both hand and power, as well as the supplies that I am using, or going to use, for any particular project. I sit down ahead of time with a cuppa and make a list of what I think I'll need, and preload the mini-system with the tools: router(s), sander, measuring and marking instruments,etc. etc. etc. This includes all the material that I need. Then when I set to work I have just about everything right at my finget-tips. When I need a tool it's right there. When I put it down for whatever reason, it goes back into it's holder - NOT onto the bench-top. I find it an incredibly useful way to work. In looking at your slat-wall system, I just don't see any way you could usefully do the same thing. With the slat-wall you have to either partk the tool somewhere eise,or shuffle tools off the board to get the one you want, and then shuffle the removed tools back, and, of course, to the reverse to put things away.
Nice job John. I enjoy the practicality of your projects & designs. Might I suggest a clear Lexan type strip for the bottom face of the storage bins?...
Nice idea! I'm debating about going to s French cleat system but this seems a little more appealing to me. Can't wait to see how you organize the tools.
Thanks John for a great video! This is a much better system than the French cleat board that I installed last year. Looks like a demolition and re-build is needed ;)
April Wilkerson Thanks April. I'll have an update video / article later in the week showing all of the tools (hopefully, if I can ever get over this cold!)
It's great to learn something new, John... I would never have thought about running plywood through a planer. But really, if I'm just taking a light skim like you did, why not? It looks like you can only access the slots from the left? Does the window trim block the right side?
I wish I could but a like or Thank me, but that's what I can offer! Worth a lot more, I know, thank you for your time, effort and detail of their projects. I hope in the future to make them mine! Greetings and Magnificent John!!!
Very nice. Wonder if doors for screw bins might be good idea. If you find your fingers getting jabbed when reaching in for screws, get yourself a magnetic pick up tool.
If you get into the habit,of putting tools and things, in the place you got them from,every time you finish, soon and ALWAYS yóur wórkplace will be tidy. The winner is you at the end, as every tool will be handy to reach, and your project will be a pleasure.
Very nice!! You make it look so easy. Its hard to cut the grooves exactly right on table saw. What was the tool you used to shave off sharp edges on wood? Please let me know. Small and useful. Thank you for a great demo! FYI - best to leave out music in DIY videos, too distracting over voice.
John, Nice project. PS: I'm so happy to see my shop has a soul mate.............. or identical twin. :-) I will have to rent wall space to get all my stuff on walls. JimE
John I would like to ask two things. On 4:00 why do you flip the piece every cut? Why have you used the first layer of ply right next to the wall, it looks like the upper pieces could do the same job on their own. As always great construction and even greater video.
Organization is on my list of things to do before I die.. Hey John, what gauge nails do you typically use with your nailer? That's also on my list of stuff to acquire.
Nail gun and tango.. Nice. Made me laugh. I'm inspired now to build one sort of like yours. I was going to buy a system from Sears. Not anymore cuz "I build it" I might buy some components still. Heck, I have a lot of tools, now it's time to use them! Again, thanks for posting!
I've seen a similar commercially available system on a home show. I wonder which one would be cheaper? Probably the homemade variety by far. ok, just looked at the Borg. Much cheaper to do it yourself!
John, I believe you are one of the most creative woodworkers on the net. Sharing of your creations are greatly appreciated.
It needs to be said more often..
John, I ( and many others) GREATLY appreciate the benefit of your experience.
THANK YOU for sharing your efficient clever methods.
It will be a nice way of storing tools and screws. Definitely have to try this. Thanks for taking the time to share this.
Excellent John. I defiantly will be doing this. I have a very small shop and this will do wonders for my organization needs. Again you have saved me. Hope you feel better sir
I like filling the slots so no dust gets in. Good thinking.
Jay Bates Thanks Jay. It's a cleaner look too.
John Heisz Awesome project John, hope you feel better, the rhythmic beat of the nail gun reminded me of a tune Jay Bates has played before as well lol. Hope yall have a great weekend.
Great Job , thanks.
I was looking for a slatwall design for the doors on a home-built a storage locker and yours looks easy to build, thanks for sharing!
One thought on the hardware bins - you might consider adding an angled strip (ramp) behind the lip at each bin to make it easier to remove fasteners by hand.
A lovely, reconfigurable way to store and access your tools. Much more practical than my scrap plywood shadow board in the metal shop in Sheffield. However, just a small idea here: If the screw bins at the base were Loose sliding boxes, that you can just pop out for use, or move to a new position in the stack; it might aid work-flow. However perhaps you want to prevent them ending up all over the shop as before . As always, every idea can also compromise another requirement.
Hi John, Thanks for sharing this genius design and for all the quality content you provide for the woodworking community. You've taken the slatboard concept to a new level. The solution for preventing dust build-up is a great addition for solving that testy problem. I look forward to seeing it loaded with tools!
GRACIAS POR COMPARTIR LOS PLANOS CON NOSOTROS SE TE APRECIA MUCHO EL GESTO, desde mexico . ( thanks for sharing your plans with us, we really appreciated the gesture, from mexico).
I'm diggin' it John! "Super Tips" should be the name for all the helpful ideas You used; like 2 drywall screws to hold the plywood up temporarily b4 mounting, dipping the edge of plywood in glue, and spacing the bins shaped like a" U"... and so on! U Rock! When I grow up..... I wanna be JUST LIKE YOU!!! LOL..Have A Super Blessed Week! .....Gus (aka TheWoodWerker).
Brother You are the best! Learned a lot but am 82 today and know I have not been anywhere near as good all these years. A board and much I still like to do. Buckets and toolboxes I have many and have served me well. I am jealous of all your talents! Come to Australia and help me to get organised! Never too late or is it? Greetings Mate!
This will be my winter project,hope your cold is better,Grahame England.
Nice, looking forward the followup to see how you use it. My wife and I have been trying to shake colds the last 3 weeks so you've got my sympathy there!
Hey John!
As always, you have good ideas and present them clearly. I need something like this ( but not as big) in my little workspace, so I plan to build it soon. Now, here's an idea for one of your concise videos or perhaps a blog entry on your site: LIST the most common screws, nails and fasteners you often use. I think it could save your viewers many trips to the hardware store and hours of aggravation to know what hardware items you think are most valuable to keep in stock at all times.
Thanks again for the great videos. I look forward to seeing your tool wall filled and hope to see how it improves your efficiency. My shop ALWAYS looks like yours at the beginning of the video, so I could use some inspiration!
that cabinet is a wonderful find. over here they are dreadfully expensive. i love the way you combined the drawers to increase the effective space.
I like the slats. Looks pretty strong. It also looks great for a video background.
Eye popping to say the least. What a piece of beauty.
BTW; Someone I know lost 2 fingers recently not using a push tool with the saw... been in the business a long time too. Thank you for sharing. Be well. bye now
Thanks John me and my other half just bought a house my garage is two stories and insulated and heated. I have plenty of pegboard but, I like this idea. I might borrow it from you. Thanks for sharing.
Neat idea with the bin for the screws. It all looks good
Excellent presentation John - thank you for sharing it with the DIY community - nice selection of a Tango music as background melody, much better than "Heavy Metal" and "Rap" which often prevent the viewers for hearing the presenters' explanations. Thank you again, Ciao, L (ME, USA)
Thanks again, John, for another very interesting project. You really are a gift us (especially the many of us who don't usually post our appreciation). Hope your cold is better soon.
This is definitely a shop must have.
Looking good John...I haven't yet worked out how you attach the tools, so look forward to a future video. In the mean time get better!!
Phil Sale Should have a short update video on it later in the week to show how everything is hung.
Awesome build! I tried the French's mustard as an adhesive but I think I prefer carpenter glue... 😉
Really nice project. I like the fact that it's open, meaning, you can do pretty much anything you want with it.
The video editing was really nice as well, liked the music.
Thanks John, neat, clean, and a wonderful design, love your creativity. Thanks
Great idea and I hope you feel better soon!
Great vid. LOVE the tango!! Ty.
I've never seen this system before, I'm impressed.
Best Wishes, Brendan.
John, it's an interesting project, and I am currently doing the same thing, for much the same reason(s) - can't find the tool, cluttered work-bench, too much stuff on a shelf or in a drawer, etc.
The thing is that I am building a French Cleat system, and, while it is only partly completed, I am already finding it useful, especially as I have attached a removable mini-system to my workbench to hold the tools, both hand and power, as well as the supplies that I am using, or going to use, for any particular project.
I sit down ahead of time with a cuppa and make a list of what I think I'll need, and preload the mini-system with the tools: router(s), sander, measuring and marking instruments,etc. etc. etc. This includes all the material that I need.
Then when I set to work I have just about everything right at my finget-tips. When I need a tool it's right there. When I put it down for whatever reason, it goes back into it's holder - NOT onto the bench-top. I find it an incredibly useful way to work.
In looking at your slat-wall system, I just don't see any way you could usefully do the same thing. With the slat-wall you have to either partk the tool somewhere eise,or shuffle tools off the board to get the one you want, and then shuffle the removed tools back, and, of course, to the reverse to put things away.
Great project John, thanks for sharing! I especially like the French's glue bottle, very creative!
I really like this project! So much better than pegboard and looks great too.
Very nicely done John, now time for tools....great video.
You are the BEST, have the best projects ever.
your videos are so well done. Thanks for taking the time to do this.
Great project John. Your editing is top notch.
You are uncredible...I spend all the morning watching your chanel...you're the best "bob le bricoleur" ever..thanks for sharing ;) From France ;)
Nice job John. I enjoy the practicality of your projects & designs. Might I suggest a clear Lexan type strip for the bottom face of the storage bins?...
Nice idea! I'm debating about going to s French cleat system but this seems a little more appealing to me. Can't wait to see how you organize the tools.
Thanks John for a great video! This is a much better system than the French cleat board that I installed last year. Looks like a demolition and re-build is needed ;)
Great video John. I hope that you get well soon.
Great job with an eye to detail, a plan well executed.
You have a workshop that anyone would have, it is best that teaches how to make these tools and accessories to achieve! greetings
I am looking forward to the tool hanging
What a great idea
Who doesn't enjoy a public hanging?
Nice one John. I can't wait to see it loaded down with tools!
April Wilkerson Thanks April. I'll have an update video / article later in the week showing all of the tools (hopefully, if I can ever get over this cold!)
Looks like an idea well worth borrowing.
Piedra @@Illanril
I just finished a smaller wood screw bin following your example...Thanks!
Very cool.
Maybe add some long strip (railing) on top of screw boxline, so you can use it as a nice shelf for small whatsoever stuff?
Very slick. You come up with some creative ideas.
Vinny
I love the idea of the filled slots. I too am guilty of abandoning bins ...
interesting alternative to the cleat wall system. I look forward to seeing the tools attached to this system.
Wickedly useful and beautiful build
I hate cleaning up the shop ! It's always sooooo much fun lol
Great video John, I really like the design.
***** Thanks for the comment!
John Heisz - I Build It
Looking forward to seeing this full of tools.
Very cool project! I love the inserts.
It's great to learn something new, John... I would never have thought about running plywood through a planer. But really, if I'm just taking a light skim like you did, why not?
It looks like you can only access the slots from the left? Does the window trim block the right side?
wordsnwood Thanks. The window trim is only 1/2" thick, so I can go in from that side as well.
I wish I could but a like or Thank me, but that's what I can offer! Worth a lot more, I know, thank you for your time, effort and detail of their projects. I hope in the future to make them mine! Greetings and Magnificent John!!!
Great tool wall John!
Bellevue Woodshop Thanks Roy!
Great job John, Thanks for another great video! Keep 'em coming Cheers Harry
This was a nice piece, it really looks good I want one.
Excellent set up
That mustard sure has many uses!
awesome as always john! makes me want to rip down my random french cleat setup and go for something more uniformed and organized such as this. :D
Cool work again John.
Great idea Mr. Heisz!
Since I have my youtube channel my shop is cleaner that it ever was. At least the part in front of the camera :S.
Enredando No Garaxe Exactly! :-D
Another great job John.
This might just free up some of my overstuffed drawers.
Thanks a bunch.
Cool, look forward to seeing it fill up!
Great looking unit. And the bonus is that you still have your fingers (I cringed a little while watching the table saw portion).
Chris Davis same. And aiming the nail gun toward him. 😱
Great, I wish I’d seen this before I built my slats!
Great storage idea and build!!
Now all that's needed is the discipline to put the tool back after using it.... ;)
that's my problem too.
Well the tool does belong where ever you happened to set it down last, until you need it again then its in the wrong spot ;)
Nice workshop
Could one of your future projects be a small wooden trailer for a bicycle? Yet another good video!
Slick. Cleaner than a French cleat system.
john, excelente como simpre. un projecto practico y muy bueno. me encanto la musica de fondo. un saludo desde argentina.
Wonderful video, thanks a lot John
Nice job John!
Very nice.
Wonder if doors for screw bins might be good idea.
If you find your fingers getting jabbed when reaching in for screws, get yourself a magnetic pick up tool.
Excellent design!
thanks for sharing really enjoy the vids keep them coming pretty soon I'll be starting my own vids
Excellent idea..!!! Great video, cheers...
I really wish i could work with you John,
you seem amazing person to work with
I like your videos,this is a project i will make thanks john.
If you get into the habit,of putting tools and things, in the place you got them from,every time you finish, soon and ALWAYS yóur wórkplace will be tidy. The winner is you at the end, as every tool will be handy to reach, and your project will be a pleasure.
Very nice!! You make it look so easy. Its hard to cut the grooves exactly right on table saw.
What was the tool you used to shave off sharp edges on wood? Please let me know. Small and useful. Thank you for a great demo! FYI - best to leave out music in DIY videos, too distracting over voice.
John,
Nice project.
PS: I'm so happy to see my shop has a soul mate.............. or identical twin. :-) I will have to rent wall space to get all my stuff on walls.
JimE
that turned out sweet!
John I would like to ask two things.
On 4:00 why do you flip the piece every cut?
Why have you used the first layer of ply right next to the wall, it looks like the upper pieces could do the same job on their own.
As always great construction and even greater video.
That's a cool idea, thanks!
Organization is on my list of things to do before I die..
Hey John, what gauge nails do you typically use with your nailer? That's also on my list of stuff to acquire.
Nice build!
excellent work
The screw holder is genius!
Nice project! I wish my brad nailer sounded as cool as yours!
Nail gun and tango.. Nice. Made me laugh.
I'm inspired now to build one sort of like yours. I was going to buy a system from Sears. Not anymore cuz "I build it" I might buy some components still. Heck, I have a lot of tools, now it's time to use them!
Again, thanks for posting!
I'm thinking maybe you could use t-nuts in the boards that are removable it seems like that would be easier to mount.
Great idea! Thanks for sharing
I've seen a similar commercially available system on a home show. I wonder which one would be cheaper? Probably the homemade variety by far.
ok, just looked at the Borg. Much cheaper to do it yourself!
good instruction on how to build one of these
Very nice good idea