I don't understand what is going on in this video. The camera goes from a blank plate to suddenly a plate that has been stamped. Then he goes over the numbers that have already been stamped?
They weren't 'already stamped', they were first drawn on in pencil, then he went over the pencil with a chisel. Do you really need him to show you how to draw numbers with a pencil?
You're not supposed to make the VIN/serial number. It's supposed to be there from scratch. If restoring a vehicle involve replacing the sheet where the VIN was stamped, that will open a can of worms. You might not get the restored vehicle through an inspection. So, no, you don't make a serial number. Unless you somehow bought a title with no vehicle attached to it, of course....
Is that a prick punch or a cape chisel? Whichever, you are an excellent craftsman. Looks very professional. Have you considered using electrochemical etching? It looks like it might be less work.
You would normaly use a set of punches: alphabet and numbers. Expensive though. In a western country it would cost about what this guy could have made in the time it took him to do this.
It depends on the intent (as anything, really). Aside from the obvious malicious reasons, sometimes you can get into situations with older vehicles like the vin just rusted away and needs to be restored, and finding out the "right/legal" way to do it is just too much work. It would be just much more convenient to either replace the frame (if it has a separate frame and yours is screwed) and weld a piece of steel in place of an old number followed by chiselling, etching or stamping. That would apply to both one-offs and restoration projects. Sometimes you have the paperwork on a vehicle but not the thing itself (that's more common with motorcycles though) but there's the same model just sitting on a scrapyard and costs nothing. But again, that's from my personal experience dealing with old junk to give it a second life.
He is making numbers. They may be the same numbers as the originals, but he is making them here. At 0:22 there are no numbers. At 0:28 there are pencil numbers. At 7:24 there are stamped numbers.
...and now the tractor belongs to him.
What kind of tools you can use
I purchased old car. it's chessis number is damaged.car is original.can I repaint chessis number for noc issue
No you only get one number the police won't like it but as someone said you can do anything as long as you don get caught
Eso es el pan de cada día aquí en Venezuela, saludos desde mi pueblo Andino cafetalero agricultor Batatal Trujillo Venezuela.
Hello
Saludos.
I don't understand what is going on in this video. The camera goes from a blank plate to suddenly a plate that has been stamped. Then he goes over the numbers that have already been stamped?
They weren't 'already stamped', they were first drawn on in pencil, then he went over the pencil with a chisel. Do you really need him to show you how to draw numbers with a pencil?
You're not supposed to make the VIN/serial number. It's supposed to be there from scratch. If restoring a vehicle involve replacing the sheet where the VIN was stamped, that will open a can of worms. You might not get the restored vehicle through an inspection. So, no, you don't make a serial number. Unless you somehow bought a title with no vehicle attached to it, of course....
Modern cars have the VIN in five different places in addition to the actual riveted on plate.
That includes the windows in some cars.
Is that a prick punch or a cape chisel? Whichever, you are an excellent craftsman. Looks very professional. Have you considered using electrochemical etching? It looks like it might be less work.
Its a concrete nail
You would normaly use a set of punches: alphabet and numbers. Expensive though. In a western country it would cost about what this guy could have made in the time it took him to do this.
Were is this palace
Great work
Thx for sharing!
Не бита, не крашена, один хозяин. ;)
Public at Ferrari show: Thats a Volkswagen Transporter T4 sir...
Me: here is the chassis number....
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Toyota and Nissan enjoy laser beam printer and it's almost impossible to imitate
It's the direct way to prison, the only suspicion of the number fraud and the cops will arrest the car... The judge will be generous too....
this isn't in the states🤣
Kaha per apka shop hai
sir saan location nyo pwd po b pgawa chassis no ng motor ko..sa tagal kc nabura na..salamat
Where is your shop
Boss location mo
Is that legal ?
No its illegal
yes it's legal..you can use this way after stealing any person motorcycle or car
Sure it's legit 👌...
No problem.
I did something similar with a home made trailer I made, and put plates on it and had registered it..
whats is the size of letter punch sir should be use
Silsil na concrete nail
What's the purpose of rescribing this chassis number? when selling this vehicle later..the buyer will be much more skeptical about this
It depends on the intent (as anything, really).
Aside from the obvious malicious reasons, sometimes you can get into situations with older vehicles like the vin just rusted away and needs to be restored, and finding out the "right/legal" way to do it is just too much work. It would be just much more convenient to either replace the frame (if it has a separate frame and yours is screwed) and weld a piece of steel in place of an old number followed by chiselling, etching or stamping.
That would apply to both one-offs and restoration projects.
Sometimes you have the paperwork on a vehicle but not the thing itself (that's more common with motorcycles though) but there's the same model just sitting on a scrapyard and costs nothing.
But again, that's from my personal experience dealing with old junk to give it a second life.
Sir. Ano po sukat ng engine number ng toyota 4A small body toyota 16valve
Can you make up any numbers you want?
Ye tools kaha par milega
husay san lugar po kayo? may ppgwa ssna aq
Send your mesenger para aku na mag pm
Pm mq Zani Tyzer
@@inmyhands4827 pm po
@@inmyhands4827 1164842743
Number and font size tell me
master in his craft
Is this legal?
a little illegal!!! several years in prison 😃🤣
I want
Hai which state
🧐👍👍👍👍👍👌👌👌👌🦾🦾🦾
How much
ano location mo boss
Sir plz help me
Is there any problem for vehicle by doing this kind of work??
ofcourse problem, Chassis number not in original format consider as tampered
Good
Sir san po location? Papagawa sana ako... Nasira kasi yung saken... Paki pm po ako sa fb ko Chad Salgatar
Ok
Bos anung tolls po gamit nyu ,saan po nbibili yang tools nyu sir
Alinkey lng boss
Pwede rin concrete nail
Parang tinapalan ng tingga para madali stamp.
Инструкция о том, что нужно сделать чтоб оставить себе машину на всегда))))
San location po
San shop mo?
Bhai ye tools kha milnge
Goodjob boss
Bossing saan location
I’m not that talented bought a 25 dollar 3/8th inch carbon steel punch set from the ol harbor freight
Boss p pm po Joseph tataro pwede din po ba Yan sa engine number NG motor?
Boss saan ang shop mo, may ipapagaw po ako.
boss magkano mag pa gawa?
Message me
Boss taga saan Po kau? Pwede Po b ako mag pa stamp?
kaya moba mag ukit sa engine?
Kha pa ha hap ka shop
Saan location nio ..need ko magpatemperd ng chassis number
Hello po pag wala po ba chassis # motor huhulihin po
Покажите это Шелкову.
Bos, ano facebook mo . San location nyo?
Tango gamuza
Boss magkano po engrave...
sir pwede mag pagawa sainyo?
You aren't making numbers... You are cleaning the originals numbers...
He is making numbers. They may be the same numbers as the originals, but he is making them here.
At 0:22 there are no numbers.
At 0:28 there are pencil numbers.
At 7:24 there are stamped numbers.
Hay po, kailangan po namen magtemperd ng chassis namen saan lugar po kayo
Anu mesenger nyu para aku na mag meseges
@@inmyhands4827 boss pm mo ako Joseph tataro mesenger ko
@@inmyhands4827 pa message naman ako boss may papaayus lang po ako
Basil Delin pm nyo po ako
@@inmyhands4827 sir panu ka po ma contact
sir pm po saan po pwedeng magpagawa?
Anung klaseng metal po yang ginamit nio?
ভাই বাইকের ইঞ্জিন নাম্বার চেসিস নাম্বার পরিবর্তন করা যাবে
Wait, that’s illegal 🤣
Always a way
লোকেশন কয়া
Kailangan ko to ung 1980 kong nabili pabura na talaga chasis number
Send your mesenger and I will pm
@@inmyhands4827 san po shop nyo ngawa din po kyo s engine number
@@inmyhands4827 saan po talyer magpapgawa po Sana cavite po ako.anak ko lang sa picture.
Same problem naagnas na... San kaya pwede contact si boss?
Nahi chalega
Mere.ko.dalvane.he.bhai
Y video choro k liya banya h kya . chassis no is parkar se lena crime h
ayos ah
wow ah
Не прокатит
Crime Brasil thanks kakakaka 😂
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🙏🙏🙏👏👏
и в утиль потом раму
kabalo na mag edit sa sarili ah
Y told Khan sa ml
It's illegal
this is cool
Bro asan ka
boss
thief be like💀
В России за такое тюрьма
skończy jak motocyklista
Ur police are fools ...if they caught u r prisoner
Enseñando como robar.
Tumse na ho paega
Rat bolo
Koo koo
Fake....
Bugo
भाई अपना मोबाईल नंबर दीजिए मेरे को चेसी नंबर डालने का है ट्रॅक्टर का
Bro unga number
Mujhe chahie original phone number send karo
Apna number dijiye