ben!!!!!!!!!!! do you remember me i was harrison’s homie at taco bell tonight you told us about your rotary miata and the navy. no way i went to go look at some rotary miata’s to see how they drive and you were the first comment i see
@@benbradshaw29 dude he’ll yeah i got my Z man it’s pop tuned straight piped $1500 exhaust on it i get my license in a month or 2 i’ll come show you sometime
No, it does not lmao. It naturally runs hot! You can actually work a/c, and the heat of the trans is right under your arm . It will make its way through the vents. Now, if you're being sarcastic by saying with the windows down and topless, then no shit lols. Other than that, HELL TF IT DOES.
I have been wanting to build one of these but with the FD twin turbo fuel injection swap or a 3 chamber. With a carb and no turbo I am not the buyer on this one. But I have no doubt someone will snatch it up.
@@RunningSolo nice and I am a believer in efi especially when you put a lot of miles on them. Makes life easier. Much love and respect and best of luck with the project. I hope it works out the way you want.
nice car, I would like to know if this project it's really difficult to do for that replacement of the engine, and how you can put a wiring harness to specific engine and stuff.
if i was in San Diego today, i would get it fo me, fo sure =D a vinil wrap (flat concrete dark grey color), then i come with a x-acto knoife, fillet out some long and thin strips of the dark grey vinil, revealing the bright red undah it, like "SchingSlash Pliiin"(cutting fastly*, then metal ringing sounds). would keep dem wheels, polishing dem, then overlay a deep blood-red varnish(8 coats)
@@RunningSolo Wepa! Yo soy de Bayamón… aunque ahora vivo en EEUU también. La Starlet está bonita. Se parece a la que tenía mi tía cuando yo era chiquito. Que recuerdos me trae.
I want the next mx5 with a new rotary engine and give it a non-convertible option. I like roadster form factor but not the engine or the convertible. it's a bit flimsy and low power. IMO So, my brain just want some rigidity (not the roll cage option, I just want pure hardtop) and a bit of horsepower. I like the current mx5 rf design, but I still didn't like the convertible. XD
The car is Carburetor... so no ECU no fuel injection harness .... but that is our next move with it is to make it EFI ... which it will need a stand alone ecu
I don't know much about the 13b, but I thought only the FB generation in the USDM market came with carburetors. Was this an EFI to carburetor swap? I'm new to all this so go easy on me lol
@@RunningSolo what are the benefits of switching from EFI to carburetor? I thought EFI was easier to tune and etc. but I know that carburetors are simpler due to being more analog
@@RunningSolo just because you put an rx7 motor in 1000 dollar turd doesn't mean you are going to get 16000 I want to know what kinda drug your on poncho I want some them I think this guy stupid
Sick car! I have a 12a swapped Miata and I love it, I can't imagine what that thing is like.
ben!!!!!!!!!!! do you remember me i was harrison’s homie at taco bell tonight you told us about your rotary miata and the navy. no way i went to go look at some rotary miata’s to see how they drive and you were the first comment i see
@@ellioat719 EEEEEY I'M ON MY PHONE AT WORK RN
@@ellioat719 come back again I'll tell you all about how that car drives. Hell, I'll take you for a spin of you want.
@@benbradshaw29 dude he’ll yeah i got my Z man it’s pop tuned straight piped $1500 exhaust on it i get my license in a month or 2 i’ll come show you sometime
How did you do the swap? I have 12a does it connect to Miata tranny?
Love the RX2 in the background, my first car!
Crazy how much room that swap leaves under the hood of a Miata.
It makes the most sense....perfect power to weight ratio
A Rotary doesn't need to be big. It's only 1.3 liter.
Let's add 2 more rotors
@@jayive34 the transmissions are bigger than a twin rotor wankel.
Seen this car back at SevenStock a few years back ! Absolutely love it
I havent been to sevenstock since I think 2018 maybe. Loved going
P R EN LA CASA 🇵🇷🔥
No ac but heater works fine!! This car runs hot even if it's stock🥴😮💨
Uhmm.. no, this car runs at a perfect temp all day long
No, it does not lmao. It naturally runs hot! You can actually work a/c, and the heat of the trans is right under your arm . It will make its way through the vents. Now, if you're being sarcastic by saying with the windows down and topless, then no shit lols. Other than that, HELL TF IT DOES.
Why would i spend 20k on facebook market Mazda Rx7 When i can get this Miata for at least 7k and swap the engin, absolutely a masterpiece
That thing is sick!! 🤘
Bro....
looks like the rainbow threw up on the engine. 😎
talk to your sis ... lol
Damn if I didn’t get my r32 I would’ve hopped on that Datsun😭😭
Nice car, would love to even own a stock one.
I have been wanting to build one of these but with the FD twin turbo fuel injection swap or a 3 chamber. With a carb and no turbo I am not the buyer on this one. But I have no doubt someone will snatch it up.
We are actually going to keep this car and converted back to EFI ITB ..and go ham on the outside
@@RunningSolo nice and I am a believer in efi especially when you put a lot of miles on them. Makes life easier. Much love and respect and best of luck with the project. I hope it works out the way you want.
Suena melasa, tengo un miata del 94 original con 38,000 millas.
nice car, I would like to know if this project it's really difficult to do for that replacement of the engine, and how you can put a wiring harness to specific engine and stuff.
if i was in San Diego today, i would get it fo me, fo sure =D
a vinil wrap (flat concrete dark grey color), then i come with a x-acto knoife,
fillet out some long and thin strips of the dark grey vinil, revealing the bright red undah it, like "SchingSlash Pliiin"(cutting fastly*, then metal ringing sounds).
would keep dem wheels, polishing dem, then overlay a deep blood-red varnish(8 coats)
Your garage looks like a Puerto Rican’s garage... I love it!!! Is the Starlet rotary swapped as well?
Lol.. it is a PuertoRican Garage ... no .. the Starlet is not a rotary .. I like that one with the Stock 1.3l engine
@@RunningSolo Wepa! Yo soy de Bayamón… aunque ahora vivo en EEUU también. La Starlet está bonita. Se parece a la que tenía mi tía cuando yo era chiquito. Que recuerdos me trae.
Wow boricuas in San Diego! Chevere bro. Nice cars 👍🏼 😊
Nice build
Nice car bro these are my fave engines :)
I want to see someone put a RX7 body kit on it and call it the baby RX7😅
what transmission did you use? I plan on using a bmw zf5-speed but i don't know if it'll fit.
I want the next mx5 with a new rotary engine and give it a non-convertible option.
I like roadster form factor but not the engine or the convertible. it's a bit flimsy and low power. IMO
So, my brain just want some rigidity (not the roll cage option, I just want pure hardtop) and a bit of horsepower.
I like the current mx5 rf design, but I still didn't like the convertible. XD
Oh my god it took me a solid minute and a half to realize it was fucking Rickie lmao
Is this technically a front mid engine
So…. Is it sold??? 😅😅
Damn who ever bought this must be having fun!. Lol
❤
Question, did you use the Miata transmission? If so, did you run into any issues mating that to the 13B?
I really want a 12a in my na6ce
Did DNA Garage rebuilt that motor? Where you located ?
Damn, wish I had 15 grand!
Is that a cappuccino 🤩
How much
What trans?
En cuanto lo estás vendiendo, es que estoy interesado en un miata ya que me estoy adentrando en el drift.
i love it
Did you have to rewire the car or is there a stand alone ecu with a couple of extra plug ins?
The car is Carburetor... so no ECU no fuel injection harness .... but that is our next move with it is to make it EFI ... which it will need a stand alone ecu
Still for sale ?
mx7 or rx5
I don't know much about the 13b, but I thought only the FB generation in the USDM market came with carburetors. Was this an EFI to carburetor swap? I'm new to all this so go easy on me lol
Yup exactly
@@RunningSolo what are the benefits of switching from EFI to carburetor? I thought EFI was easier to tune and etc. but I know that carburetors are simpler due to being more analog
Still have it?
You still have it ?
Yes .. but the wifey changed her mind on selling it
mini rx7
What do you want for it?
Oh men it better be something nice you getting because selling all this beautiful special cars for the r8 not worth it lol
lol .. im not getting anything .. I just have too many projects is time to cut down .. that's all
@@RunningSolo understanble but not the starlet lol thas a true puerto ricans car haha pero palanta siempre saludos
How much are you selling it for
How much was the swap.
Around 15k
How did you mount the 13b on in?
A lot of custom fab work
WOW
Is it for sale still?
are you still selling this and how much for it
Yes I will be .. is not ready yet
How much asking price man?
I live close by I was actually really curious
@@RunningSolo yeah I’m curious as well how much do you plan on selling it for and if you won’t sell it I may want to do this in the future.
So some info on how it was done could be helpful
Wepa!
What differential, driveshaft are you using?
Torsen diff .. stock miata Transmission
Are you still selling this and for how much??
I am. .. just have more to do
Is this still for sale
Yes
how much?
I think he said 15k
Did you just say your wife wanted it that loud?!?
how can i contact you? i’m interested !!
@Rickie_runningsolo instagram
It’s a sin you didn’t show us how it drives
Bet I can post a video about it
Absolutely idiotic build that would most likely get you killed.
I'll take 2, please.
comprar
I think the toco eater fell and bumped his head on that price that car is only worth 1000 dollars
Funny cause there is always someone that says this type of comments.. and I always get full ask in all my cars
@@RunningSolo just because you put an rx7 motor in 1000 dollar turd doesn't mean you are going to get 16000 I want to know what kinda drug your on poncho I want some them I think this guy stupid
i hate that i want this
Is this car still for sale?
No .. wifey decided to keep it last minute