Installing Arduino Uno software on Windows and running your first sketch
HTML-код
- Опубликовано: 8 фев 2015
- Arduino Tutorial - This is how to install the Arduino windows software on windows 7.
Visit the techydiy Amazon com shop and help support the channel:
www.amazon.com/shop/techydiyo...
Arduino Uno::
US: amzn.to/2i6wbiI
UK: amzn.to/2hWu2mq
SUBSCRIBE NOW FOR OTHER PROJECTS!
/ @techydiy
SUBSCRIBE NOW FOR OTHER REVIEWS!
/ @techydiyreviews
LET'S CONNECT!
techydiy ► www.techydiy.org
Facebook ► / techydiy
Twitter ► / techydiy
Pinterest ► / techydiy
Connect an Arduino Uno to the usb port and then upload the blink sketch. We then modify the blink sketch to blink the led faster and slower. Наука
Visit the techydiy Amazon com shop and help support the channel:
www.amazon.com/shop/techydiyorguk
thank you so much. I never had the auto device driver pop up so I wasn't sure if it actually finished but now that I did they blink test I know its working.
thank you so much, you have been helpful to help me about uploading sketches unto my arduino uno
Thank you so much for all of your work. It helped me so much! liked and subbed.
Thank you so much for helping me , simple and easy to follow ! :)
anticipating for more nice one
excellent really helped me
Great video with great info for under 5min
आपकी वीडियो मुझे बहुत पसंद आई धन्यवाद
Thank you for this video
Thanks you were a big help
thanks and subscribe! Cheers from Austin.
Thank you ..very nice tutorial.. helped me a lot....
Thanks
Thank you sir
Thank you a lot........
Thanks Bro
Simple and easy understand
Thanks
very helpful
Thanks
Is it also suitable for mega device?
thankyou.
Hi there I have watched you video and am having trouble accessing the Arduino software site. Any ideas?
thanxs BRO BRADHAR
very good
Fantastic
Thanks
thanks for help!
Thanks for the comment/
techydiy mate you got a clone model 😾😾😾shame on you😾😾😾
Not in this video, it's a genuine product.
Thank you
Thanks
Thanks man, I've been trying to set it up but always ended up with an error
I can't able to upload the Arduino code.It says it was not connected even if I use Arduino Uno board in PC of Arduino software and connect it to my laptop
Not working some problems occurs
What is serial port ang why you set it
i think it is COM5 for arduino
In my case it continued to blink slowly
Nice
It was a nice vedio it helped me alot bro 😎 I wanted a vedio of installing smart blind sticks software installation with coding
good
Okay.. so I have the surface pro 6, which is giving me a headache. I'm having a hard time using the Arduino IDE software. Also I downloaded the Arduino 1.8.12. do you have any idea how I reset or change it? If I try to look for the right port or board, it doesn't show the right ones. program a Rexqulis Uno R3 & Elegoo Uno R3. A lady would appreciate any help. -_____-
If I'm making any sense anyways.
Select arduino r3 for the board. A ch340 driver will probably need to be installed to see the boards. If its communicating ok then you can check with tools/get board info - it will return some info. I don't know if you can get a ch340 driver for a surface pro 6, they might be the same as normal win 10 drivers but I suspect they are not.
@@techydiy I'm probably with all the wrong equipment. I watched so many videos but my hearing aids can't adjust to some of the sounds in videos. I'm only on day 1, and I do have the Arduino Uno board. Thanks anyway!
@@techydiy oh crap! did you mean the vid, pin, and sn? If you did, how can I get that info into the IDE software if you don't mind me asking?
Going back a step, when you plug your arduino board into the usb port on your surface pro, does the surface pro recognise the arduino board and give you a com port?
Can you run windows device manager (type device manager into windows search) and check under Ports (com & lpt) to see if the com port is working ?
If you cant see the com port then the arduino ide software is not going to work.
Why does my serial port only shows COM3? How do I know which port is COM3?
Device manager
I want to load my company's software
there is an error during the download
S
Invalid library found
Hello! I'm having issue with my arduino uno. It was working OK couple days ago. But now it has problem with uploading. When I try to upload, first it stuck at uploading, after a while it gives quite a long error message starts with
Problem uploading board,
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x2c
avrdude: stk500_recv(): programmer is not responding................etc. I tried almost all the tricks and instructions online such as reset button. None of them didn't work. I'm sure that my ports and other options for Arduino UNO are correct. When I connect my arduino to computer I hear the device insertion sound, also yellow(L) and green(ON) lights of the arduino board are on. I reinstalled software. And when I connect arduino it has installed the port automatically which means board and computers' connection is OK. Also when I connect my arduino board to motor driver, my stepper motor is working with the code which I uploaded previously. How can I fix it? Please tell me if there is other way.
+kuukeldei deidara Have you checked that you are using the correct com port ? Run Device manager, select Ports (COM & Lpt), look for Arduino Uno and check which com port is assigned. Then check the serial port selected in the Arduino IDE software, tools, com port.
yes, I checked all of them. It is ok. When I plugged arduino in port menu becomes active and also chooses correct port automatically. I tried to press reset button. didn't work. Also I tried to do autoformat. It's also not working
I would try and narrow down where the problem lies. So a basic check is to see if the rx tx lights flash during the upload; communications could be disrupted if you have something plugged into the rx (0) and tx(1) ports. You could remove the ic and bridge those two ports with a jumper and then using a terminal program you should get back what you send (type) to it. That will help you determine where to look next.
@@techydiy i have the same problem, meaning that we should not pluck anything to rx and tx port?
i am also got this type of error. solution is you can choose correct usb port. some times some usb are does not work properly without any intimation.
Arduino 1.0.6 runs on XP?
Dude.. who uses XP
Who still uses or have a windows xp license
my L light stays off