To work around that problem, you can add extra button under dash to turn radio on and off. Just connect button wire 1 to BAT+ and button wire 2 to ACC. In Video 0:08 (Wire 1 to Yellow, Wire 2 to Red). Basic principe, if you short 2 wire (button), radio is turning on, but be sure your car does not have ACC wire in car wireloom (that huge connector what you see in video 0:08, the other side what goes further under dash.. make sure that ACC pin is empty, behind red wire).. or you get all sort of other problems!
I ran into a problem on the FORD FOCUS 2 , in general, they did car audio to me , closed + and - , burned 2 tracks on canbus , restored , now the radio goes into sleep mode , where consumption is 0.04, which is a lot, battery discharge occurs in 3-4 days. I don 't know how to disable canbus , do you know how to do it ?
i have the same system in ford s-max i connected the rear camera and put the vehicle in reverse and just turned off the xtrons and it doesn't work anymore it's dead
Caro amico, ti seguo su RUclips e ho capito una cosa, ho un problema, ho una radio android cinese con cablaggio e Canbus già configurata. Ho una Ford Fiesta tdci 1.4 Titanium anno 2011/2012 , FORD Fiesta Mk6 Hatchback JA8 JR8 1.4 TDCi 51 kW 70 CV il mio problema è che i comandi al volante sinistro, il tasto volume + e -, il tasto avanti e retromarcia non funzionano, mentre funzionano i comandi a destra , controllo crociera, velocità, ecc. Come posso far funzionare i controlli di sinistra? Ho un'auto cinese con Android QT7.Non me li fa impostare nemmeno se vado in fabbrica e digito il codice è lo faccio manualmente
To work around that problem, you can add extra button under dash to turn radio on and off. Just connect button wire 1 to BAT+ and button wire 2 to ACC. In Video 0:08 (Wire 1 to Yellow, Wire 2 to Red). Basic principe, if you short 2 wire (button), radio is turning on, but be sure your car does not have ACC wire in car wireloom (that huge connector what you see in video 0:08, the other side what goes further under dash.. make sure that ACC pin is empty, behind red wire).. or you get all sort of other problems!
conecta en cable rojo y el amarillo juntos, mejor dicho conecta el cable rojo (accesorios) al amarillo, del arnes que va a la pantalla.
You fix problem ?
Viem,stare video ale mozno niekomu pomozem.Focus mk2 nepotrebuje Canbus modul.Takze modul prec a zapojit ten konektor s cervenym a oranzovym kablom
I ran into a problem on the FORD FOCUS 2 , in general, they did car audio to me , closed + and - , burned 2 tracks on canbus , restored , now the radio goes into sleep mode , where consumption is 0.04, which is a lot, battery discharge occurs in 3-4 days. I don 't know how to disable canbus , do you know how to do it ?
i have the same system in ford s-max i connected the rear camera and put the vehicle in reverse and just turned off the xtrons and it doesn't work anymore it's dead
@@NooB36796 I think, you don't need Canbus in Focus 2. Only 12V from battery and IGN
@@benjaminrados9075 You probably made a short circuit or the camera was faulty
@@onenneehoubeles3308 Thank you so much ! Hi from Rus.
Caro amico, ti seguo su RUclips e ho capito una cosa, ho un problema, ho una radio android cinese con cablaggio e Canbus già configurata. Ho una Ford Fiesta tdci 1.4 Titanium anno 2011/2012 , FORD Fiesta Mk6 Hatchback JA8 JR8 1.4 TDCi 51 kW 70 CV il
mio problema è che i comandi al volante sinistro, il tasto volume + e -, il tasto avanti e retromarcia non funzionano, mentre funzionano i comandi a destra , controllo crociera, velocità, ecc. Come posso far funzionare i controlli di sinistra? Ho un'auto cinese con Android QT7.Non me li fa impostare nemmeno se vado in fabbrica e digito il codice è lo faccio manualmente
Vyřešil jsi to ? Nebyl vadný ten can bus? Děje se mi to samé a nevím co s tím
Have you solved the issue? Today I installed it and it doesn't start... No idea what to do.
Cable rojo conectado
Were we conect the red cable.