Outstanding finish! That is smoother than glass! People getting your boards (chess or cutting or other work) have no idea how much time, patience, and attention to detail you put into every one of your boards. Even the videos don't show it all but give them a good idea how much expert craftsmanship is put into you work. The care you put into the shipping is just one more good example! Very lucky customers!
Flawless, absolutely flawless - as always, I should mention... Really, thanks for sharing your ideas & skills with us. A true inspiration. I have seen every single movie you showed on youtube. Best greetings from Germany, Michael
i have seen some chess boards being made....but you sir are amazing at your designs some are just trippy .....and inspiring.....liked and subbed...keep the vids coming
that finish was amazing ! I tried to make this kind of finish once (glass finish) but even after 20 minutes buffing didnt help. You sir are great at what you do.
Euuwe That turned out nice! For not having a (professional) paint booth you have found out with Hard Work anything can turn out to be a Good Job. I owned a Automotive Repair Shop and I can see the steps you took (putting on the Apron before you started to Polish) was a good Idea, its the first step in Good Housekeeping,& the surround you made to try and keep the Polishing Material somewhat confined to the table you were working on (Nice). That is almost impossible, the polisher seems to speck up everything that is within throwing distance, and can cause quite a mess to get everything back to a clean state. The use of the spray bottle to keep the surface wet and acts as a lubricant is a must. I noticed you spot sanded by Hand the little dirt or lint specks out of the surface before you put on another coat of product, I was taught by an old timer to (take a New Single Edged Razor Blade) and hold it in the straight up position and u can use it as kind of a mini card scraper, you have to hold it flat and straight up, it scrapes the particle off level, then you sand your area after that, it Levels the surface a lot easier. Woops I am starting to write a Book, ha ha, When really All I wanted to say was, Darn you do nice work Andrei.
woow fantastic polish... I was amazed at the last polish. your hard work is really worth it. God has blessed you with amazing quality.... hats off sir... thank you
¿Cómo haces tú para que todas las casillas blancas del tablero de ajedrez tengan las líneas de veta en la misma dirección y no te quede unas que vayan hacia arriba (por ejemplo) y otras que vayan hacia la derecha?, ¿Cómo tú logras controlar eso si al momento en que tú estás poniendo los listones de madera claros y oscuros uno al lado de los otros, parece que no te fijas bien si la veta va hacia un lado o hacia el otro?... ¿Cómo controlas ese proceso para que todas las vetas de todas las casillas (blancas y negras) queden en una misma dirección?.
Meu amigo sou admirador do teu trabalho você é muito caprichoso.. Parabéns My friend I am admirer of your work you are very capricious .. Congratulations
просто отлично! смотрю, на 1/3 ролика доска готова... думаю - Что ж он еще делать с ней будет? А там... жесть сколько всего! Кстати, имея станок чпу, можно и окантовку сделать и в ней буквы-цифры пропечатать... По любому - мастер молодец!
Здравствуйте. Если можно (может секрет) расскажите где вы берете пиломатериал разных цветов. Неужели чем то пропитываете. Но в условиях мастерской это сложновато, покупаете? Ладно черный или красноватый материал. Но ярко белый или фиолетовый. даже мореный дуб таким насыщенным не будет. Спасибо.
I surely can appreciate the quality of your chessboards each time I watch a new video. This one is beautiful but I couldn't really play well on it because of the beautiful glass like finish you put on the board. It would not help me concentrate on the board if a reflective light would be hitting my naked eyes. I would have to play with photo grey or transitions lens eyeglasses to help reduce the glare off the playing surface. Immaculate work though Andrei. I can't wait for you to send me pictures or videos of the boards you're currently working on.
My Friend, It is obvious to anyone with eyes that work, what a fabulous finish you have achieved! an I please be excused to ask a couple of persona questions. What is the engraving machine you are using. In a general neighborhood how much is a piece of art worth. That looks like a lot of work! Fantastic!
Great demonstration! What grain filler are you using? Water based or oil based? Is it a commercial brand or your own mix? And what grit do you use after that? xx
Beautiful work! Can I ask, what are the specs of the bit you are using for the engraving? Or, could you post a link to the site that you order them from? Thanks!
Здравствуйте, вы молодец очень хорошо получается у вас. А не могли бы вы и мне сделать шашочную доску???? 26/26см не складную, толщина 3см, и с скрытой нишей для хранение шашек????
Расскажите пожалуйста, что за средства вы используете для конечной полировки(с 5-й минуты)? Результат просто восхитил меня!!! Вы словно Шопен, а ваши изделия ноктюрны!
Great ! .. You do shipments to aegentina ? .. If I asked a desk shaped L 1.50 cm long by 50cm wide and the other part of 1 m by 50 cm wide .. in the form of video itself as it cost? .. what you send to Argentina ?
Hi, I start turning pen and in my beginners kit I receive a purple heart blank. I see in this video that your wood is really purple, mine was more brown? Is it an error or this wood change of color?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Outstanding finish! That is smoother than glass! People getting your boards (chess or cutting or other work) have no idea how much time, patience, and attention to detail you put into every one of your boards. Even the videos don't show it all but give them a good idea how much expert craftsmanship is put into you work. The care you put into the shipping is just one more good example! Very lucky customers!
+MRrwmac It took two week to make this board. A lot of work and expensive materials. Thanks!
+MRrwmac yes very beautiful
Yours Sincerely
Guy looking for a freebie 😂
How much do you sale them for would like to buy one let me no thank you
@@mtmwood на продажу делаете? сколько такая будет стоить?
Always appreciate you showing all of your great techniques to us. You take great pride in the details and it shows in the quality of your work.
The amount of precision and care you put in all your pieces are amazing. Thank you for your videos
Unboxing that board with that care also into emballage ought to be a customer experience in itself. Very nice! Thank you for sharing.
Absolutely unbelievable
Your patience is astonishing.
Great work
Quality workmanship. You truly care about the products you ship out.
Genius idea with the splash guard. 👍 Great job on the finish.
Thank you from Texas.
Absolutely gorgeous. And I love the packing crate at the end--nice touch!
I would have never thought end grain could polish like that. Beautiful!
It was more the varnish that he polished
Now that's one BEAUTIFUL Chess Board! True Craftsmanship & Woodworking Skills; nothing more to say....
Beautifully done from start to finish.
Derek
Шедевр! Очень приятно смотреть процесс работы.
Beautiful Chess board. Love the personalized text on the back.
You sir....are the rock star of all rock star wood workers. I wish I could be your apprentice. You are simply....the best.
That is just gorgeous. It's amazing how much work you put into making these boards.
Шедевр. Как всегда. Не перестаю восхищаться! 🙌
Flawless, absolutely flawless - as always, I should mention...
Really, thanks for sharing your ideas & skills with us.
A true inspiration. I have seen every single movie you showed on youtube.
Best greetings from Germany,
Michael
+Michael Kleine-Tebbe Thanks for watching!
That is not a cheeseboard!!!
That Sir, is a work of art!!!!
Magnificent!!!
just made a couple boards using your methods! thanks for the no nonsense videos!
very good work , festool is great in your hands
wow this is so shiny. it looks awesome. you will never stop impressing me!!
The polish on that board and overall look is spectacular! Great job from an avid chess player!
Holy crap. I never thought wood could be used as a mirror. You have proven me wrong, and amazed sir.
i have seen some chess boards being made....but you sir are amazing at your designs some are just trippy .....and inspiring.....liked and subbed...keep the vids coming
Amazing attention to detail a true craftsman
that finish was amazing ! I tried to make this kind of finish once (glass finish) but even after 20 minutes buffing didnt help. You sir are great at what you do.
Unbelievable, Andrei. Fabulous work!
Euuwe That turned out nice! For not having a (professional) paint booth you have found out with Hard Work anything can turn out to be a Good Job. I owned a Automotive Repair Shop and I can see the steps you took (putting on the Apron before you started to Polish) was a good Idea, its the first step in Good Housekeeping,& the surround you made to try and keep the Polishing Material somewhat confined to the table you were working on (Nice). That is almost impossible, the polisher seems to speck up everything that is within throwing distance, and can cause quite a mess to get everything back to a clean state. The use of the spray bottle to keep the surface wet and acts as a lubricant is a must.
I noticed you spot sanded by Hand the little dirt or lint specks out of the surface before you put on another coat of product, I was taught by an old timer to (take a New Single Edged Razor Blade) and hold it in the straight up position and u can use it as kind of a mini card scraper, you have to hold it flat and straight up, it scrapes the particle off level, then you sand your area after that, it Levels the surface a lot easier.
Woops I am starting to write a Book, ha ha, When really All I wanted to say was, Darn you do nice work Andrei.
woow fantastic polish...
I was amazed at the last polish. your hard work is really worth it. God has blessed you with amazing quality....
hats off sir... thank you
+Zohaib Dalal Thanks!
Belíssimo trabalho , incluíndo a caixa de transporte! vc está de parabéns.
Your work is simply amazing. All of your cutting boards are so beautiful! But this chess board is WOW!
Thanks!
Quality,quality,quality! Well done.
Exceptional finish and build!
I want this chess board, this is so beautiful! Your chess boards made me fell love with chess!
That came out incredibly shiny. Not he polishing was very ,successful.great job.
Супер, Серега. Не полировка а стекло. Хрусталь. Умеешь, ничего не скажешь.
looks great! like seeing all the fine steps you take to make this result..and being a clean carpenter! keep on going!
As a fellow woodworker i am in awe of your level of detail, I hope you get paid well enough to make a good living. Because you deserve it.
+Clint Eastwood Thanks!
¿Cómo haces tú para que todas las casillas blancas del tablero de ajedrez tengan las líneas de veta en la misma dirección y no te quede unas que vayan hacia arriba (por ejemplo) y otras que vayan hacia la derecha?, ¿Cómo tú logras controlar eso si al momento en que tú estás poniendo los listones de madera claros y oscuros uno al lado de los otros, parece que no te fijas bien si la veta va hacia un lado o hacia el otro?... ¿Cómo controlas ese proceso para que todas las vetas de todas las casillas (blancas y negras) queden en una misma dirección?.
You Sir, are a master! Beautiful work. Much respect and admiration!!
Amazing finish Andrei!
Awesome work! So much sanding and polishing would make me crazy but it looks so good!
+knives&stuff I have very good sanding tools. Thanks!
Stunning reflection on chessboard
that is absolutely beautiful great work
Wow! like a beautiful piece of art.
Absolutely beautiful! I just might have to start playing chess so I have an excuse to get one for myself.
Increíble trabajo e increíble resultado.
nice work and love the end packaging.
как всегда, что-то новое и суперское!!!
пысы.: я бы не отказался от такой посылки ))))))
Meu amigo sou admirador do teu trabalho você é muito caprichoso.. Parabéns
My friend I am admirer of your work you are very capricious .. Congratulations
Please stand back. A master of wood at work.
Very well done. Thanks for sharing.
Excellent work Andrei.
+Alex Pettigrew Thanks, Alex!
Gorgeous finish.
просто отлично! смотрю, на 1/3 ролика доска готова... думаю - Что ж он еще делать с ней будет? А там... жесть сколько всего! Кстати, имея станок чпу, можно и окантовку сделать и в ней буквы-цифры пропечатать... По любому - мастер молодец!
Love the way you pack it in, even that should be able to get through the Danish postal service without getting destroyed ;-)
Love your work.
+Thias Russell Thanks!:)
Amazing & beautiful job !!! 👏👏👏👏
What an excellent finish...!
Cheers...
Beautiful finish!
This is what perfection looks like!!
Здравствуйте. Если можно (может секрет) расскажите где вы берете пиломатериал разных цветов. Неужели чем то пропитываете. Но в условиях мастерской это сложновато, покупаете? Ладно черный или красноватый материал. Но ярко белый или фиолетовый. даже мореный дуб таким насыщенным не будет. Спасибо.
+Владимир Нарцев Это все естественные цвета. Значительную часть материала беру здесь - www.woodstock.su/prod/208/catalog.html?all
Спасибо.
I surely can appreciate the quality of your chessboards each time I watch a new video. This one is beautiful but I couldn't really play well on it because of the beautiful glass like finish you put on the board. It would not help me concentrate on the board if a reflective light would be hitting my naked eyes. I would have to play with photo grey or transitions lens eyeglasses to help reduce the glare off the playing surface. Immaculate work though Andrei. I can't wait for you to send me pictures or videos of the boards you're currently working on.
+1bongocero This was a wish of the customer.
Немыслимо! Невероятно круто бро!
😍 Its freaking nice! I love all your work!! Greetings from Belgium!
What an artist!! And his instrument is wood...
good job i love this board great work
There can be no doubt - you're the *reference* to all chessboard makers out there.
Beautiful work
Грунт если есть возможность используйте полиэфирный, усадок меньше будет.
My Friend, It is obvious to anyone with eyes that work, what a fabulous finish you have achieved! an I please be excused to ask a couple of persona questions. What is the engraving machine you are using. In a general neighborhood how much is a piece of art worth. That looks like a lot of work! Fantastic!
+Andy Crossland Thanks! www.cnc-step.de/en/products/cnc-router-ball-screws/1193-s720t-cnc-engraver-linux-windows.html
Hi, what's the machine that looks like a planer, but it's not at 0:54. And what is it used for pls ? Awesome work btw.
+Mach Istador This is Dual Drum Sander
Amazing finish!
Great demonstration! What grain filler are you using? Water based or oil based? Is it a commercial brand or your own mix? And what grit do you use after that? xx
это офигенно! фестул конечно вещь! представляю как можно отполировать этими пастами нержавейку.
+трезвенник Не пробовал. Но это все автомобильные материалы.
Brilliant Job
Потрясающе !!!
outstanding work!
Золотые руки браво
So, properly finished, then! I hope your customer is very happy...
That's beautiful.
Very Good! Perfect...
Simply lovely.
Hermoso !!!! Algún día tendré uno así!!!
amazing work!
Как раз ищу мастера сделать шахматную доску на 3 играков, вы берете частные заказы с доставкой в Вильнюс?
"It's the meaning of "Artistic Creation
"You The Best"
Hello there very nice work how much are you selling them for I would like to buy one let me no thank you
mtmwood.com/en/chessboards.php
Congratulations, it was too beautiful, one day I learn rsrs.
Master craftsman at work
Beautiful work! Can I ask, what are the specs of the bit you are using for the engraving? Or, could you post a link to the site that you order them from? Thanks!
+blkhoury4 30 degree, 0.2 mm tip. Do you read in Russian?:) - www.gravman.ru/tools_8_1.htm
+mtmwood. That was very helpful, even in Russian. Thank you!
+mtmwood One more question. At what depth do you set the bit for that small of text?
blkhoury4 0.5 mm
What was the engraving machine called?
Great work!
Wow !What do you use for grain filler? do you think this could be obtained without grain filler as well?
+MrHmiko I use special polyurethane grain filler Saerlack, Italy. No, it is impossible.
Extraordinario...no tengo palabras...
what is the point of roughing up the surface before u add new coat? to create more surface area for the next coat to adhere to?
+Missy Doodles To make the surface more smooth.
Здравствуйте, вы молодец очень хорошо получается у вас. А не могли бы вы и мне сделать шашочную доску???? 26/26см не складную, толщина 3см, и с скрытой нишей для хранение шашек????
Я делаю только торцевые доски
Закажите торцевую доску в виде шахматной доски с гастроемкостью. В которую будете шашки складывать.)))
Расскажите пожалуйста, что за средства вы используете для конечной полировки(с 5-й минуты)?
Результат просто восхитил меня!!! Вы словно Шопен, а ваши изделия ноктюрны!
+Diko Hellish Я же показывал близко. Материалы Festool. Спасибо!
Теперь, посмотрев с дескопа я увидел)))
Great ! .. You do shipments to aegentina ? .. If I asked a desk shaped L 1.50 cm long by 50cm wide and the other part of 1 m by 50 cm wide .. in the form of video itself as it cost? .. what you send to Argentina ?
+the Mati`s show We can ship to Argentina. The large boards are very expensive and the shipping costs to Argentina are high.
+mtmwood Ok thanks I love your work at some point you will order several models
Excellent.
Hi,
I start turning pen and in my beginners kit I receive a purple heart blank. I see in this video that your wood is really purple, mine was more brown? Is it an error or this wood change of color?
+Stéphane Varin Usually it is grey after sawing and becomes purple during a contact with oxygen.
how much for a board like that?