Chinese Jaw Crusher PE-4x6 Disassembly Cleanup Lube!
HTML-код
- Опубликовано: 23 авг 2024
- Hello All!
Dissembled the Chinese PE-4x6 crusher and I am sure glad I did! The bushing lube ports were FULL of Metal Shavings, Oil and crud! I was aware of these kind of issues with buying a Chinese Jaw Crusher and so it was always my plan to run through this thing and ensure all is correct before using. This PE-4x6 is very heavy duty and looks like it will serve my needs for many years!
Disassembly Cleanup Paint Inside Lube Yeah Baby!
Thanks for watching!
Peace PT 
Развлечения
They are grease cups, the idea is to fill the cap and screw it on, giving it a couple of turns a day, I work on bigger jaw crushers and you don't grease the wedge (tapered bit for adjusting jaw gap) because all the force of crushing is applied to the adjusting bolt instead of the friction on the wedge face holding it.
Thanks.. I figured you put oil or grease in these cups. I wasn’t familiar so installed grease fittings.
I’m gonna leave in the grease fittings I installed as they are working well and so far no mess with oil or grease getting into the crushed ore.
Only greased twice so far. The first time it was oily but no grease so I it took a few pumps to fill up. The second time it still seemed well lubed.. but wanted to push out any dirt, I just pumped in a small amount and wiped off the excess slightly dirty grease.
So far it’s been a good jaw crusher!
Busting Rocks!
Thanks Mr Sock
✌️PT
Nice video, not a lot of detailed videos that show the individual parts and assembly of jaw crushers on youtube. Waiting for part 2!
Hello Mohammed! Sorry I missed your comment sir. Here is the follow up video! Thanks for watching and commenting!ruclips.net/video/Nyo4H0PK0dQ/видео.html
✌️PT
Hello friend, Get【price & details】about 【stone,brick,concrete,aggragate jaw crusher】please check web: www.chinafote.com/stone_crusher.html?yangtu
Whatsapp me:+8618837106989
Hi like the videos i was looking at making one of these thanks for a brill break down and a great look inside. As for the oilers you can get caps that you screw down with grease in them but it reminded me of my friend who builds steam traction engines from the ground up. He uses them oilers and fills them with oil. He says it does several jobs keeps clean oil flowing through over prolonged periods of time ie on a road trip but also the oil that is silt out washes away and dust and also lubricates other parts as it runs down the machine. That makes more sense to me as i use to have to grease the machines up at the start of the day never gets greased again until next day an we use to get through a lot of bronze bearings. my money would be on oilers.
Mind you good job you took machine apart as that swarf in the drilling would of ripped your bearing up in no time grease or oil lol.
Hello Darren, I thought about the same thing.. oil keeps washing out the grit and dirt. However I was worried about getting oil into the crushed material. So far the grease is working well and I’ve had no issues getting lube into my crushed ore.
Maybe in a production environment oil may be better? Not sure totally. Anyway it’s easy and fast to grease also rate after greasing I wipe off the expelled dirty grease keeping the crusher oil and grease free!
Thanks much for your terrific comment!
✌️PT
Please do a detailed video on the toggle plate and it adjuster
Hello Taku, I am planning to replace the Diesel engine with a 5hp 3ph electric motor. When I do this modification I will show the toggle plate adjustment.
Thanks for your wonderful comment!
✌️PT
Hi PT, Thanks for subscribing and I hope you enjoy. Dennis
Hello.. Thanks sir!
PT
Seems I have not seen any links on your channel - yet , only watched a few so far ?
There’s more ☝️🤓
Thanks much
Peace Prospector Tripp
Go Matt go!
I remember a Forsyth in HS.. are you from Michigan?
Thanks for watching and commenting!
✌️PT
I'm having to wait for glue to dry... so am going back and re-watching some of your earlier stuff PT. I'd forgotten how much cr*p you had to clean out of that baby. Metal Shavings and Dirt, the Breakfast of Champions! (MSADTBOC). Peace !
I fired up the jaw crusher the other day and the diesel started dripping oil from the valve cover. When purchased an extra valve cover gasket came with the engine. 😳
They’ve apparently had trouble with leaking.
I removed the valve cover, cleaned up and resealed with The Right Stuff Gasket maker. During this I checked the oil and it was Over Full? I didn’t over fill? I found that I left the fuel On.. has a on off fuel valve.
I believe the diesel fuel slowly leaks into the crankcase when left On! After a few months oil level is too high.. pressure is too high.. valve cover gasket blows and leaks.
I have not started or drained and replaced the oil yet.. just repaired the leaking gasket.
Before starting I’ll change the oil.. should be okay if I turn the fuel off.
Thanks
✌️PT
@Della Konicek Still breaking rocks!
Thanks Della
✌️PT
I can see that lasting awhile especially the way you take care of things!!!!
Flour gold Wizards
Jason, thanks sir.. The Hard Rock Sampling Trailer is getting closer to home!
Line by line
PT
Supper!!
Thanks much!
Busting Rocks!
✌️PT
I believe those fine fellows overseas though you could use a little something to do with all that spare time you have a left a little something something for you to do. Maybe.?
My man JP, Actually I knew I would find something I didn’t like or needed fixing. It’s something I like to do it seems.. check out, take apart, make better. 🤓
✌️PT
@@ProspectorTripp i like your style my man hows everyone doing on your end brother
@@josephpecoul6532 we are both well, thanks for asking buddy. My eye is great but still needs a couple weeks until all N2O gas inside is absorbed.
The pups are absolutely terrific!
Love those two mutts.
Thanks Joseph
✌️PT
@@ProspectorTripp your good people pt and its my pleasure to have made a connection with you brother. And im happy to hear your eye is starting to heal you know if you would put an eye patch on you would look like Jeff Bridges as Rooster Cogburn give us your best impression of when he said well come see a one-eyed old fat man haha just funning you have two good eyes 😁
Did the epa say anything about the motor?
Hello Brian, no they did not. I’m sure there is some agreement with the import duties guys that gets them Paid.
Diesel Engines like all combustion engines are Noisy, oily, stinky, requires a lot of maintenance and so so powerful. Because of these reasons, I recently removed the Diesel engine and am replacing it with a used 5 HP electric motor. The electric is quiet, reliable, has no emissions, almost no maintenance and is much more powerful.
Still working on the solar power system to run the crusher and the entire trailer!
Over the last year I completely converted our Shop and Home 100% to Off grid Solar Power.
I used as much recycled materials as possible and DIYed everything!
Our system is very powerful and cost 75% less than having a comparable system installed.
Doing more with less every single day is my usual way.
Thanks
✌️PT
I was just wondering because I’m trying to import one
@@BRIANVANDUYN did you already buy?
@@BRIANVANDUYN it cost me $1500 for the Diesel engine and $1500+ to import in early 2020. Crusher and Diesel engine Total $3100+.
Be careful.. gotta be much more now.
Also when shipped it arrived at LA California port and from there it was my responsibility for storage and duties and fees and final shipping to Boise Idaho.
@@BRIANVANDUYN
Mine is for sale 😃
prospectortripp@gmail.com
Just one question...
did she say yes ?
I’m still alive my friend
😂
✌️PT
Subtítulos en español, gracias
Okay I’ll try!
Thanks
✌️PT
El Pitman tiene rodamientos o rodajes