Hi, thank you for making this video. what is the drive cycle for 2002 toyota camry? Visual inspection PASS but Function NOT READY. OBDII Monitors Not Ready Catalyst Evaporative System. Car has not been driven for atleast 5mos and battery has been replaced. Thank you for your time and advice! Looking forward to hear from you!
If the Evap System is the only system "not ready" , does the entire emission test drive need to be performed ? or can it be abbreviated (2014 Hyundai Sonata 2.0L engine)
Hi Thomas you might be okay with just the evap not ready but this depends on your state. As of august 1st 2023 I believe the evap needs to be ready in California but I’ve heard otherwise from viewers ruclips.net/video/JrXOAVkK42E/видео.htmlsi=7ZNOAl-sJvkp6qZx In Oregon for example the evap must be ready, so there are many rules depending where you live. I would call a local shop and i am planning on making a video about looking it up for yourself next week. And not to rub in Texas in my county there is no smog tests! Good luck and keep me posted.
Please Read!!!!! I love that you are so honest... My question is what a where can I ( I have a few health issues)get a cheap van. So that I can travel from Michigan to Arkansas to see my sister ( she's in a wheelchair she has had a stroke a little over a year ago) I want to be able to travel and do things with my sister before it's too late. The reason I need to cheap van is because we both ( my sister and me) only have little money. We are on a fixed income.. Please answer. Any advice will help . Keep the videos coming..
@@RANDOMFIX I had all the modules ready except the catalyst Then misfire from head gasket I will need to redo it again getting a small bit of coolant in cylinder 1.
If I run my drive cycle and finally get my OBD Scanner to show green, how long will have to take it to shop for emissions before the next cycle happens and computer runs selftest? For example I am afraid its green and suddenly right before the shop, it runs cycle and check engine light comes on? What is my time limit in this case?
Thank you for this vid. Since clearing my fault codes (was previously tuned, now stock tune is loaded), I have driven 112 miles & completed 3 BMW drive cycles. I can't get the FUEL to go ready. Everything else is Ready. Any tips\tricks are appreciated. Using the AL319 AutoLink
Thanks for the feedback. That’s weird as the fuel normally completes really fast. Here is the bmw drive cycle ruclips.net/video/mk6Tk330Acw/видео.html Try it and let me know how it goes while I brain storm.
@@RANDOMFIX Thanks for responding. I also tried the drive cycle mentioned in 11:19 from the link you provided. What's crazy is if I use Stage 1 tune, FUEL is ready when I complete the 20-30 MPH for 3:15min drive cycle. Anyway, I'm all set for another 2 yrs :) Have a good one!!
Are you trying to pass a SMOG in CA? You actually do not need the fuel monitor to be ready to pass smog. The Continuous monitors are ignored on CA smog checks. Not many inspectors know this so you get some resistance to them running the test but just ask them to please run the test. It will pass. If you would like to see where this information is search for "CA On-Board Diagnostic Test Reference " See section C footnote 3
Brand new? Check to make sure your battery is ideal and start vehicle and just it idle for 20 minutes and drive around town for 15 minutes at 35 to 45 mph. Out of curiosity why do you need a smog on a 2020+ vette?
@@RANDOMFIX Because of the insane CA markups, I purchased it in PA and got it at sticker price. CA requires all vehicle with out of state registrations to get a smog check. Even though the car has a sticker that says it was built to CA emission standards.
I hear on the markup bs that dealers are adding on! Check all the o2 connections and connectors. Just un clip and click the connector back on. Honestly I had a similar situation with another viewer and the poor guy got the run around for a few months. I actually just text him and when he provides me the vette specific drive cycle I will forward it to you. Please check in with me in 5 days.
Probably already got this resolved but for future reference GM does not allow some monitors to run in the first 1000 miles of the cars life. You can go to the state Referee and get a passing test with the Monitors incomplete as long as the car is CA equipment equipped and is under 1000 miles.
@stevew9563 LOL. That would have been good to know. The sensors finally all became "complete". I just drove it more. It was around 900 miles. Thanks for the the info though.
What is the drive cycle for 2009 Honda Pilot that failed my smog test and showed oxygen/ heat sensory something like that as the only issue . Thank you
It depends on the make model and condition of the vehicle. What are you driving and I will send the exact drive cycle that explains it on video so your are not driving around wasting fuel.
Hi, here is honda cycle that explains everything in depth for your 2019 passport ruclips.net/video/oZELvZ4danA/видео.html on the video read the comments, on honda vehicles you will have to rev the engine to test some components like the vtech . This little trick will let you know when your monitors are ready. ruclips.net/video/cxpE_I1cKh8/видео.html Good luck and let me know what happens
Please read!!!! I'm a 51 year old lady with a few health issues.. my question is what and where can I get a cheap van that I can turn into a camper to travel full time with my sister who is in a wheelchair ( she had a stroke little over a year ago) we want to be able to go see and do things before it too late.. We both have a small fixed income.. please give me some advice on a van..
2010 Ford f150 5.4 v8 Truck has all monitors ready except (Evap) but it has permanent codes PO455/46/47 All evap codes.. Drove 200 miles and their still there.. repairs have been made and ecm reflashed. Btw car was state reffed due to smog shop doing dirty work
@@RANDOMFIX guys. Just make sure it’s done 15 cycles and you’re good.. had to find out the hard way in California. 15 cycles and it’s not clear take it anyways and they are required to do it manually and it’ll pass
@@RANDOMFIX went online did some research on BAR in the state of CA and it says if it doesn’t clear after 15 cycles they need to check it manually . Went in and they did it manually, passed
Hi, thank you for making this video. what is the drive cycle for 2002 toyota camry? Visual inspection PASS but Function NOT READY. OBDII Monitors Not Ready Catalyst Evaporative System. Car has not been driven for atleast 5mos and battery has been replaced. Thank you for your time and advice! Looking forward to hear from you!
Sorry for the late reply! did you find a solution?
Can you send the drive cycle for gmc Acadia? Have driven over 400 miles and they say keep driving 🤷♀️
I can understand your frustration ruclips.net/video/Yp34ksJY-fQ/видео.htmlsi=KTD4OSc1sKpFbaX-
Can you send the Drive Cycle of 2010 Nissan Altima SL as to check the Catalyst ? 。Thanks!
It was in the video description
ruclips.net/video/s9PLkO-CjZ8/видео.html
If the Evap System is the only system "not ready" , does the entire emission test drive need to be performed ? or can it be abbreviated (2014 Hyundai Sonata 2.0L engine)
Hi Thomas you might be okay with just the evap not ready but this depends on your state. As of august 1st 2023 I believe the evap needs to be ready in California but I’ve heard otherwise from viewers
ruclips.net/video/JrXOAVkK42E/видео.htmlsi=7ZNOAl-sJvkp6qZx
In Oregon for example the evap must be ready, so there are many rules depending where you live.
I would call a local shop and i am planning on making a video about looking it up for yourself next week.
And not to rub in Texas in my county there is no smog tests!
Good luck and keep me posted.
THANK YOU SIR YOUR WAY WONDERFULL I DO AND PASS THANK YOU SO MUCH
Vu, thank you so much for the great feedback. Much appreciated and congrats on passing your smog test.
Please Read!!!!! I love that you are so honest... My question is what a where can I ( I have a few health issues)get a cheap van. So that I can travel from Michigan to Arkansas to see my sister ( she's in a wheelchair she has had a stroke a little over a year ago) I want to be able to travel and do things with my sister before it's too late. The reason I need to cheap van is because we both ( my sister and me) only have little money. We are on a fixed income.. Please answer. Any advice will help . Keep the videos coming..
I made a video about this
ruclips.net/video/nqPSV0mszfk/видео.html
And the same would apply towards a used van.
Thanks fingers crossed on a 1999 Mercedes SLK
Any updates?
@@RANDOMFIX I had all the modules ready except the catalyst
Then misfire from head gasket I will need to redo it again getting a small bit of coolant in cylinder 1.
If I run my drive cycle and finally get my OBD Scanner to show green, how long will have to take it to shop for emissions before the next cycle happens and computer runs selftest? For example I am afraid its green and suddenly right before the shop, it runs cycle and check engine light comes on? What is my time limit in this case?
Thank you for this vid. Since clearing my fault codes (was previously tuned, now stock tune is loaded), I have driven 112 miles & completed 3 BMW drive cycles. I can't get the FUEL to go ready. Everything else is Ready. Any tips\tricks are appreciated. Using the AL319 AutoLink
Thanks for the feedback.
That’s weird as the fuel normally completes really fast. Here is the bmw drive cycle
ruclips.net/video/mk6Tk330Acw/видео.html
Try it and let me know how it goes while I brain storm.
@@RANDOMFIX Thanks for responding. I also tried the drive cycle mentioned in 11:19 from the link you provided. What's crazy is if I use Stage 1 tune, FUEL is ready when I complete the 20-30 MPH for 3:15min drive cycle. Anyway, I'm all set for another 2 yrs :) Have a good one!!
Are you trying to pass a SMOG in CA? You actually do not need the fuel monitor to be ready to pass smog. The Continuous monitors are ignored on CA smog checks. Not many inspectors know this so you get some resistance to them running the test but just ask them to please run the test. It will pass.
If you would like to see where this information is search for "CA On-Board Diagnostic Test Reference
" See section C footnote 3
Brand new C8 Corvette. Can't get the O2 sensor ready? Do you have a fix for this? Please and Thank You!
Brand new? Check to make sure your battery is ideal and start vehicle and just it idle for 20 minutes and drive around town for 15 minutes at 35 to 45 mph. Out of curiosity why do you need a smog on a 2020+ vette?
@@RANDOMFIX Because of the insane CA markups, I purchased it in PA and got it at sticker price. CA requires all vehicle with out of state registrations to get a smog check. Even though the car has a sticker that says it was built to CA emission standards.
I hear on the markup bs that dealers are adding on!
Check all the o2 connections and connectors. Just un clip and click the connector back on. Honestly I had a similar situation with another viewer and the poor guy got the run around for a few months. I actually just text him and when he provides me the vette specific drive cycle I will forward it to you. Please check in with me in 5 days.
Probably already got this resolved but for future reference GM does not allow some monitors to run in the first 1000 miles of the cars life. You can go to the state Referee and get a passing test with the Monitors incomplete as long as the car is CA equipment equipped and is under 1000 miles.
@stevew9563 LOL. That would have been good to know. The sensors finally all became "complete". I just drove it more. It was around 900 miles. Thanks for the the info though.
What is the drive cycle for 2009 Honda Pilot that failed my smog test and showed oxygen/ heat sensory something like that as the only issue . Thank you
Sorry for the late reply! did you find a solution?
Thank you!
Sorry for the late reply! did you find a solution?
@@RANDOMFIX yes, all is good:-)
Good to hear
How many mph to run on a freeway for drive cycle?
It depends on the make model and condition of the vehicle. What are you driving and I will send the exact drive cycle that explains it on video so your are not driving around wasting fuel.
@@RANDOMFIX 2019 honda passport egr not ready code and I can’t figure it out.
Hi, here is honda cycle that explains everything in depth for your 2019 passport ruclips.net/video/oZELvZ4danA/видео.html on the video read the comments, on honda vehicles you will have to rev the engine to test some components like the vtech .
This little trick will let you know when your monitors are ready. ruclips.net/video/cxpE_I1cKh8/видео.html
Good luck and let me know what happens
I noticed that the drive cycle for a Toyota is not in the list. Mine is a 2005 Celica. thanks.
it should be every 12 months like uk.
Every state here in the us has it’s only own rules. It’s impossible to know the rules that apply to whole country.
I love your videos.. I like how you are so honest about things...
Please read!!!! I'm a 51 year old lady with a few health issues.. my question is what and where can I get a cheap van that I can turn into a camper to travel full time with my sister who is in a wheelchair ( she had a stroke little over a year ago) we want to be able to go see and do things before it too late.. We both have a small fixed income.. please give me some advice on a van..
Should be never, it’s my private property.
You talk too much…. Just do the drive and show how long it takes. 😂😂😂😂
Yes, master
Master, Would you like more tea?
CA is too expensive to live!
Thank you for your feedback, much apprecated!
2010 Ford f150 5.4 v8
Truck has all monitors ready except (Evap) but it has permanent codes PO455/46/47
All evap codes..
Drove 200 miles and their still there..
repairs have been made and ecm reflashed.
Btw car was state reffed due to smog shop doing dirty work
Thank you for your feedback, much apprecated!
@@RANDOMFIX guys. Just make sure it’s done 15 cycles and you’re good.. had to find out the hard way in California.
15 cycles and it’s not clear take it anyways and they are required to do it manually and it’ll pass
Awesome information about them have to manually pass it. How did you figure this out?
@@RANDOMFIX went online did some research on BAR in the state of CA and it says if it doesn’t clear after 15 cycles they need to check it manually .
Went in and they did it manually, passed
Awesome, thank you for correcting me!!! Much appreciated